HEAD 4H6712 - Caterpillar

Illustration 1 g03061736
Right side view
Table 1
Specification for 240-6650 Cylinder Block Gp and 373-2260 Cylinder Block Gp    
Item     Qty     Part     Specification Description    
The camshaft bearings from the rear surface of the cylinder block are the following dimensions:    
The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle.    
A     -     -     Distance from rear face of cylinder block is
1660.0 1.5 mm (65.35 0.06 inch).    
B     -     -     Distance from rear face of cylinder block is
1390.0 1.5 mm (54.72 0.06 inch).    
C     -     -     Distance from rear face of cylinder block is
1120.0 1.5 mm (44.09 0.06 inch).    
D     -     -     Distance from rear face of cylinder block is
850.0 1.5 mm (33.46 0.06 inch).    
E     -     -     Distance from rear face of cylinder block is
580.0 1.5 mm (22.83 0.06 inch).    
F     -     -     Distance from rear face of cylinder block is
310.0 1.5 mm (12.20 0.06 inch).    
G     -     -     Distance from rear face of cylinder block is
40.0 1.5 mm (1.58 0.06 inch).