HEAD 6E0277 - Caterpillar

Illustration 225 g02801596
Connect harness assembly (46). Secure harness assembly (46) with new cable straps (47) .
Illustration 226 g02801476
Position air lines (45) and secure air lines (45) with hardware (44) .
Illustration 227 g02801197
Install air spring (43). Install bolt (41). Connect air hose (42) .
Illustration 228 g02801176
Position bumper (40), (not shown). Install nut (39). Install bolt (37) .
Illustration 229 g02801058
Install tee fitting (35), adapter fitting (33), elbow (36), fitting (34), pressure sensor (32) to air valve (37) .
Illustration 230 g02800996
Connect harness assembly (30) and harness assembly (28) to air valve assembly (31). Connect air line (29) .
Illustration 231 g02800939
Install guard (27). Install washer (25) and nut (24). Install knob (26) .
Illustration 232 g02800876
Install clamp (23), bracket (21), and two screws (22) on air compressor (17) .
Illustration 233 g02800836
Install air compressor (17). Install two bolts (18). Connect air lines (19) and (20). Connect harness assembly (16) .
Illustration 234 g02474781
Install plate (12) .
Install blocks (11) and (14). Install tether assembly (13). Install bolts (10) and (15). Repeat for the other side.
Illustration 235 g02474780
Remove suitable cribbing (9) from suspension (8) .
Illustration 236 g02800776
Collapse suspension (8) and install boot (6) and ground strap (7) .
Illustration 237 g02800716
Install four slide blocks (5) .
Illustration 238 g02474637
Position seat (3) on the suspension. Disengage fore/aft latch (4) and slide seat (3) onto the suspension.
Illustration 239 g02436815
Install stop block (2). Install bolts (1) .