HEAD 6E1943 - Caterpillar

Illustration 10 g01374045
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. Stay clear 3 m (10 ft) plus twice the line insulator length. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death
Refer to Operation and Maintenance Manual, "Specifications" for further information.Crushing Injury (If Equipped) (9)
Illustration 11 g01374035This safety message is located in the cab on the right side window.
Crush injury. Could cause serious injury or death. Always confirm that the quick coupler is engaged onto the pins. Read the Operator's Manual.
Refer to Operation and Maintenance Manual, "Quick Coupler Operation" for further information.Crushing Hazard (10)This safety message is located on both sides of the stick.
Illustration 12 g01385579
A crushing hazard exists when the stick and boom are in motion and when the machine is being used in object handling applications. Failure to stay clear of the stick and boom when the machine is in operation can result in personal injury or death. Stay clear of the stick and boom when the machine is in operation.
Aerosol Starting Aid (11)This warning is located on the Air Filter housing and on the engine inlet manifold.
Illustration 13 g01372254
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Engine Starting" for the proper starting procedure.Jump Start Cables (12)This warning is located on the support assembly next to the battery.
Illustration 14 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.Rotating Fan (13)This warning is located on the cover of the fan on the radiator or on the hydraulic oil cooler unit.
Illustration 15 g03531125
Rotating fan blades can result in personal injury or death.Stop the engine and allow the fan to come to a complete stop before making any test or adjustment.Before starting the engine, make sure all of the finger guards are installed and the guard door is closed. Do not allow any tools or test equipment to protrude or vibrate into the path of the rotating fan blades.
Hot Surface (14)This warning is located on the coolant reservoir which is next to the supply tube.
Illustration 16 g01371640
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.