HEAD GP-PUMP 6E4379 - Caterpillar

6E4379 HEAD GP-PUMP Caterpillar parts D8N, D8R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6E4379
6E-4379
6E4379

Weight: 45 pounds 20 kg.

Buy HEAD GP-PUMP 6E4379 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

This part in 4 request: Show. This information for suppliers only!

2022-09-28

2021-02-14

2021-01-07

2018-09-17

Compatible equipment models: 6E4379:

TRACK-TYPE TRACTOR D8N D8R Caterpillar

Number on catalog scheme: 23

Caterpillar 6E4379 Parts scheme HEAD GP-PUMP

For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Name Qty
A 1P-2860 Retaining Ring Pliers 1
B 138-7575 Link Bracket 2
C 140-7742 Sleeve 2
Illustration 1 g01062494
Illustration 2 g01060618
Attach a suitable lifting device to the lift arm assembly (10). Use Tooling (C) on the rear of the lift arm assembly, as shown. The lift arm assembly weighs approximately 442 kg (975 lb). Install the lift arm assembly.
Illustration 3 g01060614
Connect harness assembly (9) .
Illustration 4 g01060440
Connect tube assemblies (8). Install clamps (7). Repeat this step for the other side of the lift arms.
Illustration 5 g01060426
Raise the rod end of the lift cylinder. Install pin (4). Use Tooling (A) in order to install retaining ring (3). Repeat this step for the other side of the lift arms.
Raise the link assembly and install pin assembly (2). Install the bolt and the washer (not shown) that is located on the back side of pin (2). Install bolt (1). Repeat this step for the other side of the lift arms.
Install pin assembly (6). Install bolt (5) .
Tilt the cab. Refer to Disassembly and Assembly, "Cab - Tilt".End By:
Install the tilt cylinder. Refer to Disassembly and Assembly, "Tilt Cylinder - Remove and Install".
Install the quick coupler. Refer to Disassembly and Assembly, "Quick Coupler - Remove and Install".