6E6164 HEAD Caterpillar parts
416B, 426B, 428B
Rating:
Alternative (cross code) number:
CA6E6164
6E-6164
6E6164
CA6E6164
6E-6164
6E6164
Weight: 16 pounds 7 kg.
BACKHOE LOADER,
This part in 2 request:
Show.
This information for suppliers only!
2022-12-14
2017-10-03
Number on catalog scheme:
11
For full view, you need register
Information:
Two-Way Flow
Clockwise Rotation (4) - Push this thumb wheel forward in order to rotate the work tool clockwise.
Counterclockwise Rotation (4) - Push this thumb wheel backward in order to rotate the work tool counterclockwise.
Close (5) - Push this thumb wheel forward in order to close the work tool.
Open (5) - Push this thumb wheel rearward in order to open the work tool. Front Shovel
Illustration 4 g00559405
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Bucket Dump (6) - Move the joystick to this position in order to dump the bucket.
Boom Raise (7) - Move the joystick to this position in order to raise the boom.
Bucket Close (8) - Move the joystick to this position in order to close the bucket. Hold (9) - When you release the joysticks from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally.In order to change the joystick control pattern, refer to Operation and Maintenance Manual, "Joystick Controls Alternate Patterns".Work Tool Control
Joystick controls have different functions in one-way flow and in two-way flow. One-way flow is used when you operate work tools such as hammers. Two-way flow is used when you operate work tools such as shears, grapples, and pulverizers. In order to switch the hydraulic system between one-way flow and two-way flow, refer to Operation and Maintenance Manual, "Work Tool Flow Mode Control".
Illustration 5 g01132327
Note: Not all switches will have a function in each configuration.
Horn (2) - Press this switch in order to activate the horn.
Open (4) and (5) - Push this thumb wheel forward in order to open the work tool.
Close (4) and (5) - Push this thumb wheel backward in order to close the work tool.
AEC (7) - Press this switch in order to activate low engine speed. Press the switch again in order to activate high engine speed.
Clockwise Rotation (4) - Push this thumb wheel forward in order to rotate the work tool clockwise.
Counterclockwise Rotation (4) - Push this thumb wheel backward in order to rotate the work tool counterclockwise.
Close (5) - Push this thumb wheel forward in order to close the work tool.
Open (5) - Push this thumb wheel rearward in order to open the work tool. Front Shovel
Illustration 4 g00559405
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Bucket Dump (6) - Move the joystick to this position in order to dump the bucket.
Boom Raise (7) - Move the joystick to this position in order to raise the boom.
Bucket Close (8) - Move the joystick to this position in order to close the bucket. Hold (9) - When you release the joysticks from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.Two functions may be performed at the same time by moving a joystick diagonally.In order to change the joystick control pattern, refer to Operation and Maintenance Manual, "Joystick Controls Alternate Patterns".Work Tool Control
Joystick controls have different functions in one-way flow and in two-way flow. One-way flow is used when you operate work tools such as hammers. Two-way flow is used when you operate work tools such as shears, grapples, and pulverizers. In order to switch the hydraulic system between one-way flow and two-way flow, refer to Operation and Maintenance Manual, "Work Tool Flow Mode Control".
Illustration 5 g01132327
Note: Not all switches will have a function in each configuration.
Horn (2) - Press this switch in order to activate the horn.
Open (4) and (5) - Push this thumb wheel forward in order to open the work tool.
Close (4) and (5) - Push this thumb wheel backward in order to close the work tool.
AEC (7) - Press this switch in order to activate low engine speed. Press the switch again in order to activate high engine speed.
Caterpillar parts catalog:
Parts head Caterpillar catalog:
12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H, 160H ES, 160H NA, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 163H NA, 416, 416B, 416C, 416D,...
416, 416B, 416C, 426, 426B, 428, 428B, 428C, 438C
416B, 416C, 426, 426C, 428, 428B, 428C, 432D, 432E, 434E, 436C, 438C, 442D, 442E, 444E, 902, 906, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH62, TH63, TH82, TH83
303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 414E, 416B, 416C, 416D, 416E, 420D, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 430D,...
416, 416B, 416C, 426B, 426C, 436C, 446, 446B, 583R
416B, 416C, 426C, 436C, 446B, 583R, 583T, PL83
416B, 428B, 918F, 924F
416B, 416C, 428B, 428C, 438C, 611
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D, 446B, 446D
416C, 420D, 426B, 426C, 428C, 430D, 436, 436B, 436C, 438B, 438C, 446B
14H, 14H NA, 16G, 16H, 16H NA, 416C, 416D, 420D, 422E, 424D, 426C, 428B, 428C, 428D, 428E, 430D, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E, 910E, IT12B
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
416B, 416C, 416D, 420D, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 438D, 442D, 446B, 446D
416B, 416C, 428B, 428C, 438C, 611
416B, 428B, 918F, 924F
416B, 416C, 426C, 436C, 446B, 583R, 583T, PL83
416, 416B, 416C, 426B, 426C, 436C, 446, 446B, 583R
303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 414E, 416B, 416C, 416D, 416E, 420D, 422E, 424D, 426B, 426C, 428B, 428C, 428D, 428E, 430D,...
1125737
HEAD
446B, 446D, 450E, 825G
446B, 446D, 450E, 825G
9T2822
HEAD
446, 446B, 825G, 825G II, 825H, 825K
446, 446B, 825G, 825G II, 825H, 825K
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
1206678
HEAD
446B, 446D
446B, 446D
416C, 420D, 426B, 426C, 428C, 430D, 436, 436B, 436C, 438B, 438C, 446B
9T2961
HEAD
446, 446B, 446D
446, 446B, 446D