HEAD GP-CYL 7C6890 - Caterpillar

Illustration 18 g01920354
Install two hoses (1) onto the ends of tube assembly (2). Secure hoses (1) by using eight hose clamps (A) .Note: Hose clamps (A) were removed in Step 2 of the ""Removal Procedure"".
Illustration 19 g01925083
Secure tube assembly (2) to the left hand side of the frame by using four bolts (B), four washers (C), one bracket assembly (3), and two half clamps (4). Connect hose (D) to tube assembly (2) .Note: Bolts (B) and washers (C) were removed in Step 3 of the ""Removal Procedure"".
Illustration 20 g01920398
Install one hose (1) onto the end of tube assembly (E). Secure hose (1) by using four hose clamps (A) .Note: Hose clamps (A) were removed in Step 5 of the ""Removal Procedure"".
Secure tube assembly (E) to the frame by using two half clamps (4), two bolts (5), three washers (6), one bracket assembly (7), two bolts (8), and one washer (F) .Note: Washer (F) was removed in Step 6 of the ""Removal Procedure"".
Illustration 21 g01920553
Install two hoses (1) onto the ends of tube assembly (G). Secure two hoses (1) by using eight hose clamps (A). Connect hose (H) and hose (J) to tube assembly (G) .Note: Hose clamps (A) were removed in Step 9 of the ""Removal Procedure"".Note: Hose (J) and hose (H) were disconnected in Step 9 of the ""Removal Procedure"".
Illustration 22 g01920613
Secure tube assembly (G) to the frame by using four half clamps (4), three bolts (9), three washers (6), one nut (10), one plate (11), two bolts (K), three washers (L), one locking stud (M), and one nut (N) .Note: Bolts (K), washers (L), locking stud (M), and nut (N) were removed in Step 10 of the ""Removal Procedure"".
Illustration 23 g01920654
Install two hoses (1) on the ends of tube assembly (P). Secure two hoses (1) by using eight hose clamps (A) .Note: Hose clamps (A) were removed in Step 7 of the ""Removal Procedure"".
Connect hose (T) to tube assembly (P). Secure tube assembly (P) to the front right of the frame by using four bolts (R) and four washers (S). Note: Bolts (R) and washers (S) were removed in Step 8 of the ""Removal Procedure"".
Illustration 24 g01920793
Install two hoses (12) onto the ends of tube assembly (V). Secure hoses (12) by using eight hose clamps (A) .Note: Hose clamps (A) were removed in Step 11 of the ""Removal Procedure"".
Install two hoses (13) onto the ends of tube assembly (U). Secure hoses (13) by using eight hose clamps (A) .Note: Hose clamps (A) were removed in Step 11 of the ""Removal Procedure"".
Illustration 25 g01925115
Secure tube assembly (U) by using two bolts (X), six washers (Y), two nuts (Z), two bolts (AA), and two clips (AB) .Note: Bolts (X), bolts (AA), washers (Y), nuts (Z) and clips (AB) were removed in Step 12 of the ""Removal Procedure"".