HEAD LAMP 7F4625 - Caterpillar

7F4625 HEAD LAMP Caterpillar parts 955C, 977D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7F4625
7F-4625
7F4625

Weight: 1 pounds 0 kg.

Buy HEAD LAMP 7F4625 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

This part in 1 request: Show. This information for suppliers only!

#350032 7F4625

2019-08-13

Compatible equipment models: 7F4625:

TRACK LOADER 955C 977D Caterpillar

Number on catalog scheme: None

Caterpillar 7F4625 Parts scheme HEAD LAMP

For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 187-2718 Filter Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Inspect the O-ring seals before installation. If a seal is cut, scratched, or cracked, obtain a new seal for installation. To make installation easier, coat the bores for the seals with clean diesel fuel.
Illustration 1 g00599248
Install O-ring seals (9) and valve (10) into adapter (5).
Install O-ring seals (7) and (8) into each base (6).
Illustration 2 g00599247
Assemble the fuel filter housing. Install bolts and nuts (4).
Illustration 3 g00599246
Ensure that the sealing surface of the mounting base is clean. Apply clean diesel fuel to the gaskets of new fuel filters (3). Position fuel filters (3). Use Tooling (A) and tighten fuel filters (3) until the gaskets contact the bases. Tighten fuel filters (3) for an additional one full turn (360 degrees). Do not overtighten fuel filters (3).
Illustration 4 g00599245
Position bracket (2) onto the fuel filter housing. Install bolts (1). End By:
Install the fuel priming pump, if equipped. Refer to Disassembly and Assembly, "Fuel Priming Pump - Remove and Install".
Install the fuel filter housing. Refer to Disassembly and Assembly, "Fuel Filter Housing - Install".