HEAD GP-PUMP 8J8412 - Caterpillar

Illustration 1 g02592716
Table 1
Specification for 191-2693 Swing Drive Gp
Item Qty Part Specification Description
1 1 114-1399 Gauge Pipe Torque to 60 6 N m (44 4 lb ft).
2 1 227-6221 Breather As Torque to 45.0 4.5 N m (33.2 3.3 lb ft).
3 16 453-2843 Bolt Torque to 270 40 N m (199 30 lb ft).
4 - - Before assembly, apply 1U-8846 Gasket Sealant to the flange surface of the cover and the gear.
C - - After four spring pins are installed, make two stake marks at a distance (C) from each spring pin.
Distance of the pin hole from the bore is 2.25 0.75 mm (0.089 0.030 inch).
5 1 136-2904 Bearing Apply Loctite C5A Copper Anti-Seize on the outer diameter and inner diameter of the bearing. Apply Loctite C5A Copper Anti-Seize to the mating parts of the bearing.
6 1 136-2940 Bearing Apply Loctite C5A Copper Anti-Seize on the outer diameter and inner diameter of the bearing. Apply Loctite C5A Copper Anti-Seize to the mating parts of the bearing.
7 1 6V-7238 Shutoff Valve Torque for installing the shutoff valve to 28 to 31 N m (248 to 274 lb in).
Torque for shutting the shutoff valve to 2.9 0.5 N m (25.7 4.4 lb in).
8 2 135-9044 Lip Type Seal Lubricate the sealing lip of the two lip type seals with the lubricant that is being sealed. Lubricate the circumference of the two lip type seals with clean grease when the lip type seal is installed in the cage.