HEAD 9T4984 - Caterpillar

9T4984 HEAD Caterpillar parts 235B, 235C

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9T4984
9T-4984
9T4984

Weight: 62 pounds 28 kg.

Information:

FLANGE SIZE 273.57

INSERT DIAMETER 165.02

INSERT LENGTH 50.4

INSIDE DIAMETER 120.93

PORT LOCATION 127

QUANTITY OF HOLES 8

PORT SIZE 32

Buy HEAD 9T4984 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 9T4984:

EXCAVATOR 235B 235C Caterpillar

Number on catalog scheme: 15

For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0510 Driver Group 1
C 139-0088 Seal Installation Tool 1
D - Loctite Quick Cure Primer 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01195730
Use Tooling (B) to install lip seal (2) into the housing.
Apply Tooling (D) to shaft (10). Use a suitable press to install bearing assembly (1) on shaft (10).
Install shaft (10) and bearing assembly (1) in housing (3).
Install O-ring seal (14) on housing (3).
Install retainer (13) and bolts (11).
Position gear (4) on shaft (10). Install washer (6) and bolt (7).
Use Tooling (C) to install seal assembly (12) onto shaft (10) until the stationary cup is fully seated into housing (3).
Install impeller (5) on shaft (10). Install washer (8) and bolt (9). Tighten bolt (9) to a torque of 39 3 N m (29 2 lb ft).
Install adapter (15).End By:
Install the water pump. Refer to Disassembly and Assembly, "Water Pump - Install".