HEAD 9T5708 - Caterpillar

Display Module
Illustration 1 g03815622
Instrument cluster (1) Home Button (2) Back Button (3) Direction Buttons (4) Help ButtonHome Button (1) - The Home button is used to return to the Home screen.Back Button (2) - This button is used to return to the previous screen.Direction Buttons (3) - The Direction buttons are used to navigate through the display screens and to increase or decrease a setting value.Help Button (4) - This button is used to return to the main menu.Use the Direction buttons (3) to navigate through the menus/submenus and to highlight a desired selection. Press the "OK" button to select a highlighted field.Also use the Direction buttons to highlight a mode or parameter setting. Press the "OK" button to accept the highlighted setting.Upon starting the machine (key ON), the monitoring system display will perform a self test. The first preliminary screen will ask the operator to choose between a previously stored profile and the default settings. Press the Direction buttons to move through the list of saved profiles. Press the "OK" button to accept a highlighted profile. If the "OK" button is not pressed within 15 minutes after start-up, the default settings will be loaded into the memory.A second popup screen appears when active faults or events are reported to the Monitoring System by an ECM. When warning information appears on the screen, the operator must acknowledge the warning message by pressing the "OK" button. The monitoring system display will scroll through all of the warning messages that are generated by active faults or events. The warning messages are not cleared from system memory by pressing the "OK" button. The message may reoccur after some time according to the severity of the warning information.After all of the screens with warning messages are acknowledged, the Default Screen will appear.