1654219 HEADLINER Caterpillar parts
950G, 962G, 966G, 972G, 980G
Rating:
Alternative (cross code) number:
CA1654219
165-4219
1654219
CA1654219
165-4219
1654219
Weight: 15 pounds 6 kg.
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Zero Gravity Double Bubble Windscreen Dark Smoke 1654219
ZERO GRAVITY All fits ZERO Gravity windscreens offer superior optical quality, strength plus flexibility, exceptional fit and finish, plus proven performance || Developed by fits ZERO Gravity R&D in 1995 for Team ZGs bikes, the Double Bubble is now seen on tracks around the world || Made from the finest grade of 1/8in. acrylic plastic. Each windscreen is stretched as it is formed, a process which results in superior strength and flexibility. This flexibility allows the windscreen to absorb road vibrations and resist cracking || Formed with a wedge-shaped bubble in the center of the windscreen, the Double Bubble was originally designed to provide superior aerodynamics for a rider tucked in behind the windscreen || Adds a sleek, aerodynamic look to the exciting designs of todays new sportbikes
ZERO GRAVITY All fits ZERO Gravity windscreens offer superior optical quality, strength plus flexibility, exceptional fit and finish, plus proven performance || Developed by fits ZERO Gravity R&D in 1995 for Team ZGs bikes, the Double Bubble is now seen on tracks around the world || Made from the finest grade of 1/8in. acrylic plastic. Each windscreen is stretched as it is formed, a process which results in superior strength and flexibility. This flexibility allows the windscreen to absorb road vibrations and resist cracking || Formed with a wedge-shaped bubble in the center of the windscreen, the Double Bubble was originally designed to provide superior aerodynamics for a rider tucked in behind the windscreen || Adds a sleek, aerodynamic look to the exciting designs of todays new sportbikes
Zero Gravity Double Bubble Windscreen Dark Smoke 1654219
ZERO GRAVITY Double Bubble Windscreen
ZERO GRAVITY Double Bubble Windscreen
$93.61
03 Feb 2023
0.75[0.34] Pounds
US: Powersport Supe
Zero Gravity Double Bubble Windscreen Dark Smoke 1654219
ZERO GRAVITY All compatible with ZERO Gravity windscreens offer superior optical quality, strength plus flexibility, exceptional fit and finish, plus race-proven performance || Developed by compatible with ZERO Gravity R&D in 1995 for Team ZGs race bikes, the Double Bubble is now seen on race tracks around the world || Made from the finest grade of 1/8in. acrylic plastic. || Each windscreen is stretched as it is formed, a process which results in superior strength and flexibility. || This flexibility allows the windscreen to absorb road vibrations and resist cracking
ZERO GRAVITY All compatible with ZERO Gravity windscreens offer superior optical quality, strength plus flexibility, exceptional fit and finish, plus race-proven performance || Developed by compatible with ZERO Gravity R&D in 1995 for Team ZGs race bikes, the Double Bubble is now seen on race tracks around the world || Made from the finest grade of 1/8in. acrylic plastic. || Each windscreen is stretched as it is formed, a process which results in superior strength and flexibility. || This flexibility allows the windscreen to absorb road vibrations and resist cracking
Number on catalog scheme:
23
For full view, you need register
Information:
Removal Procedure
Start By:
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Remove the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) and Drive Shaft Support Bearing - Remove".Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help prevent dirt from entering the internal mechanism.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Illustration 1 g01101186
View from the articulated hitch area
Illustration 2 g01101187
Disconnect hose assembly (2) from secondary steering gear pump (1) .
Remove four bolts (4), elbow (3) and the O-ring seal from secondary steering gear pump (1) .
Illustration 3 g01101188
Remove two bolts (5) that hold secondary steering gear pump (1) to the output transfer gears.
Remove secondary steering gear pump (1) from the output transfer gears.
Remove gasket (6) from secondary steering gear pump (1) .
Start By:
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Remove the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) and Drive Shaft Support Bearing - Remove".Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help prevent dirt from entering the internal mechanism.Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Drain the hydraulic tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the proper draining procedure.
Illustration 1 g01101186
View from the articulated hitch area
Illustration 2 g01101187
Disconnect hose assembly (2) from secondary steering gear pump (1) .
Remove four bolts (4), elbow (3) and the O-ring seal from secondary steering gear pump (1) .
Illustration 3 g01101188
Remove two bolts (5) that hold secondary steering gear pump (1) to the output transfer gears.
Remove secondary steering gear pump (1) from the output transfer gears.
Remove gasket (6) from secondary steering gear pump (1) .
Caterpillar parts catalog:
Parts headliner Caterpillar catalog:
3Y9786
HEADLINER
916, 926, 936, G936
916, 926, 936, G936
6C8196
HEADLINER AS
936F
936F
9V3442
HEADLINER AS
916, 926, 936, 936F, CS-643, G936, IT28
916, 926, 936, 936F, CS-643, G936, IT28
2521840
HEADLINER AS
844K, 854K, 990K, 992K, 993K, 994H
844K, 854K, 990K, 992K, 993K, 994H
2490889
HEADLINER AS
844K, 854K, 990K, 992K, 993K, 994H
844K, 854K, 990K, 992K, 993K, 994H
2514646
HEADLINER
844H, 854K, 990H, 992K, 994F
844H, 854K, 990H, 992K, 994F
7V8776
HEADLINER
834B, 836, 988B, 992C, 994, 994D
834B, 836, 988B, 992C, 994, 994D
1238690
HEADLINER
844, 844H, 854G, 854K, 990 II, 990H, 992G, 992K, 994F
844, 844H, 854G, 854K, 990 II, 990H, 992G, 992K, 994F
1463096
HEADLINER
844, 844H, 854G, 854K, 990 II, 990H, 992G, 992K, 994F
844, 844H, 854G, 854K, 990 II, 990H, 992G, 992K, 994F