3793450 HEADLINER Caterpillar parts
824K, 825K, 826K, 834K, 836K, 988K
Rating:
Alternative (cross code) number:
CA3793450
379-3450
3793450
CA3793450
379-3450
3793450
Weight: 9 pounds 4 kg.
LANDFILL COMPACTOR, WHEEL LOADER,
Compatible equipment models: 3793450:
Number on catalog scheme:
21
For full view, you need register
Information:
PRODUCTS
PS-150B (3XR1-274),
PS-200B (5JR1-219),
PS-360B (9LS1-100),
PF-290B (1XW1-72) PNEUMATIC COMPACTORProblem:
Some compactors have improperly torqued hardware on the driveshaft yokes. This hardware may become loose enough to allow the driveshafts to disconnect. Solution:
The following procedure is designed to prevent driveshaft yokes from loosening and becoming disconnected.1. Block the wheels to ensure that the machine will not move during this procedure.2. Remove the bolts and straps at the top end of the driveshaft securing the U-joint to the yoke on the brake assembly output shaft.3. Move the driveshaft down and out of the way to gain access to the yoke mounting bolt.4. Remove the bolt and washer securing the yoke to the brake assembly output shaft.5. Replace the existing washer 4Y-3046 with a new one. Make sure bolt threads are clean and free of oil. Apply 9S-3263 or 4C-4030 Thread Lock and torque the bolt to 102 N m (75 lb ft).6. Repeat steps 1-5 for the other driveshaft. COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
PS-150B (3XR1-274),
PS-200B (5JR1-219),
PS-360B (9LS1-100),
PF-290B (1XW1-72) PNEUMATIC COMPACTORProblem:
Some compactors have improperly torqued hardware on the driveshaft yokes. This hardware may become loose enough to allow the driveshafts to disconnect. Solution:
The following procedure is designed to prevent driveshaft yokes from loosening and becoming disconnected.1. Block the wheels to ensure that the machine will not move during this procedure.2. Remove the bolts and straps at the top end of the driveshaft securing the U-joint to the yoke on the brake assembly output shaft.3. Move the driveshaft down and out of the way to gain access to the yoke mounting bolt.4. Remove the bolt and washer securing the yoke to the brake assembly output shaft.5. Replace the existing washer 4Y-3046 with a new one. Make sure bolt threads are clean and free of oil. Apply 9S-3263 or 4C-4030 Thread Lock and torque the bolt to 102 N m (75 lb ft).6. Repeat steps 1-5 for the other driveshaft. COPYRIGHT 1999 CATERPILLAR ALL RIGHTS RESERVED
Caterpillar parts catalog:
Parts headliner Caterpillar catalog:
3829323
HEADLINER
824K, 825K, 826K, 834K, 836K, 988K
824K, 825K, 826K, 834K, 836K, 988K
3764030
HEADLINER
986H
986H
2521841
HEADLINER AS
844K, 854K, 990K, 992K, 993K, 994H
844K, 854K, 990K, 992K, 993K, 994H
2521840
HEADLINER AS
844K, 854K, 990K, 992K, 993K, 994H
844K, 854K, 990K, 992K, 993K, 994H
2490889
HEADLINER AS
844K, 854K, 990K, 992K, 993K, 994H
844K, 854K, 990K, 992K, 993K, 994H
2514646
HEADLINER
844H, 854K, 990H, 992K, 994F
844H, 854K, 990H, 992K, 994F
7V8776
HEADLINER
834B, 836, 988B, 992C, 994, 994D
834B, 836, 988B, 992C, 994, 994D
7K0492
HEADLINER
992
992
9K8009
HEADLINER
950, 966C, 980B
950, 966C, 980B
3658362
HEADLINER
966M, 966M XE, 972M, 972M XE, 980M, 982M
966M, 966M XE, 972M, 972M XE, 980M, 982M
3829323
HEADLINER
824K, 825K, 826K, 834K, 836K, 988K
824K, 825K, 826K, 834K, 836K, 988K