HEATER GP-JACKET WATER 1533457 - Caterpillar

Illustration 1 g00104411
(1) Torque for nut ... 11000 550 N m (8100 400 lb ft) (2) Lubricate the inside diameter and the outside diameter with clean grease. (3) Bore of cylinder ... 150.00 0.10 mm (5.906 .004 inch) (4) Lubricate the sealing lip slightly with the lubricant that is being sealed. (5) 7Y-4666 Bearing : Outside diameter ... 95.180 0.013 mm (3.7472 .0005 inch) Inside diameter ... 80.25 0.02 mm (3.159 .001 inch) Install the bearing in the bearing bore. ... 7.50 0.30 mm (.295 .012 inch) (6) 7Y-5102 Bearing : Outside diameter ... 106.202 0.013 mm (4.1812 .0005 inch) Inside diameter ... 90.265 0.020 mm (3.5537 .0008 inch) Install the bearing in the bearing bore. ... 10.0 0.3 mm (.39 .01 inch) (7) Seals : Quantity ... 4 Install the seals in the bearing bore. ... 1.0 0.5 mm (.04 .02 inch) (8) Bore of head ... 105.63 0.03 mm (4.159 .001 inch) (9) Apply 4C-4032 Sealant to the groove before the cylinder is assembled. (10) Rod : Diameter of rod ... 104.93 0.03 mm (4.131 .001 inch) Minimum thickness for plating ... 0.033 0.007 mm (.0013 .0003 inch)