HEATER GP-CAB 1700076 - Caterpillar

Section (1) of the pump is for the implements.3. Disconnect oil lines (2) and (3) from the pump.4. Fasten a hoist to the implement and elevator pump. 5. Remove four bolts (5) that hold the suction line on the pump.6. Remove bolts (4). Remove the pump. Weight is 100 lb. (45 kg).Install Implement And Elevator Pump
1. Be sure O-ring seal (1) and coupling (2) are on the pump. Put clean oil on the O-ring seal.2. Fasten a hoist and put the implement and elevator pump in position on the pump drive and install the bolts that hold it in place.3. Install the bolts that hold suction line (3) to the pump.4. Fill the pump with clean oil. 5. Connect oil lines (4) and (5) to the pump.6. Fill the hydraulic tank to the correct level with clean oil.