HEATER AS 2524460 - Caterpillar

Illustration 43 All bores must be free of paint. Coat all bores for pins with lubricant.(1) 4I-4809 Pin Assembly Diameter after plating ... 79.085 0.025 mm (3.1136 .0010 inch)Minimum thickness for plating ... 0.005 mm (.0002 inch)Bore diameter for pin ... 80.037 0.037 mm (3.1511 .0015 inch)(2) Torque for two bolts ... 325 40 N m (240 29 lb ft)(3) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1.0 mm (0.04 inch) 093-0083 Shim thickness ... 1.0 mm (.04 inch) 7Y-2498 Shim thickness ... 1.6 mm (0.06 inch) 093-0115 Shim thickness ... 2.0 mm (.08 inch)(4) 128-9863 Sleeve Bearing Quantity ... 2Outside diameter ... 106.200 0.013 mm (4.1811 .0005 inch)Inside diameter ... 90.27 0.02 mm (3.554 .001 inch)Install the sleeve bearing in the bearing bore ... 9.5 0.8 mm (.37 .03 inch) Assemble the sleeve bearings with the groove in the location that is indicated.(5) Lubricate the sealing lip slightly with the lubricant that is being sealed.(6) 7Y-2395 Sleeve Bearing Quantity ... 2Outside diameter ... 85.160 0.013 mm (3.3527 .0005 inch)Inside diameter ... 70.25 0.02 mm (2.766 .001 inch)Install the sleeve bearing in the bearing bore ... 7.5 0.8 mm (.30 .03 inch)(7) 128-9884 Sleeve Bearing Quantity ... 2Outside diameter ... 95.180 0.013 mm (3.7472 .0005 inch)Inside diameter ... 80.25 0.02 mm (3.159 .001 inch)Install the sleeve bearing in the bearing bore ... 7.5 0.8 mm (.30 .03 inch) Assemble the sleeve bearings with the groove in the location that is indicated.