HEATER & MTG GP-CAB 2584251 - Caterpillar

Secondary Steering (2) (If Equipped) - The alert indicator will light when the electrical secondary steering motor is active. Do not operate the machine until the cause has been corrected.
Primary Steering Failure (3) - The alert indicator will light and the action alarm will sound when the primary steering flow is not functioning. The alarm will only sound when the engine is running. Do not operate the machine until the cause has been corrected.
Low Brake Pressure (4) - The alert indicator will light when the brake oil pressure is low. If this alert indicator comes on, stop the machine immediately. Engage the parking brake and stop the engine. Investigate the cause.
Low Engine Oil Pressure (5) - The alert indicator will light when the engine oil pressure is low. If this alert indicator comes on, stop the machine immediately. Stop the engine and investigate the cause.
Action Lamp (6) - If the lamp comes on the machine needs to be serviced soon. If the lamp comes on and an action alarm comes on stop the machine immediately.
Starting Aid (7) - Starting aid is active. This function is controlled automatically. The indicator should go off after the engine is warmed up.
Parking Brake (8) - The alert indicator will light when the parking brake is engaged. The alert indicator should come on during start-up when the parking brake is applied. The alert indicator should go out when the parking brake is released.
Electrical System (9) - The alert indicator will light when there is a malfunction in the electrical system. If this alert indicator comes on, the system voltage is too high for normal machine operation or too low for normal machine operation. If electrical loads (air conditioning and/or lighting) are high and the engine speed is near idle, increase the engine speed to high idle. This will generate more output from the alternator. If the alert indicator for the electrical system turns off within one minute, the electrical system is probably operating in a normal manner. However, the electrical system may be overloaded during periods of low engine speeds.Modify the operating cycle in order to prevent overloading the electrical system and discharging the batteries.Low idle must be set correctly. Adjust for the high side of the Low Idle specification while the most often used electrical loads are turned on. In order to reduce the loads, use the Medium fan speed instead of the High fan speed.If this procedure does not cause the alert indicator to turn off, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, damaged batteries, etc).If the engine speed is near operating speeds and if the electrical loads are light, the alert indicator may remain on. If the alert indicator remains on, move to a convenient location. Investigate the cause (loose alternator belt, broken alternator belt, damaged batteries, etc).
Transmission Oil Filter (10) - The transmission oil filter has been bypassed. The lamp will come on at start-up. When the machine