HEATER AS-SCREED 3510076 - Caterpillar

Table 2
Contact Description J2(1)
No.(2) Function Type
1 ATCH Stem 1 Extend EPRV/REPRV for TCS Output
2 ATCH Line 1 REPRV for TCS Output
3 ATCH Stem 2 Retract EPRV/REPRV for TCS Output
4 ATCH Stem 2 Extend EPRV/REPRV for TCS Output
8 PS Pressure EPRV Output
9 Boom Regen REPRV Output
10 Left Offset REPRV for POB Output
13 ATCH Stem 1 Retract EPRV/REPRV for TCS Output
16 Cat Data Link (-) /Input/Output
18 Right Offset REPRV for POB Output
19 PRV Return Ground
21 PRV Return Ground
22 PRV Return Ground
23 ATCH Line 2 REPRV for TCS Output
24 Pump 1 Displacement Sensor Input
25 Cat Data Link (+) Input/Output
27 Hydraulic Lock Cancel Switch Input
29 Boom Up Limit REPRV for Crane/POB Output
31 ATT Stem 3 Extend EPRV for TCS Output
34 ATT Stem 3 Retract EPRV for TCS Output
38 Bucket Out Limit EPRV for Crane/E-Fence Output
39 Boom Down REPRV for TCS/E-Fence/SMTBM(S1)/POB Output
40 Stick In REPRV for TCS/POB Output
41 Stick Out REPRV for TCS/Crane/POB Output
42 Stick Out Avoidance EPRV for POB Output
43 NFC 2 Limit EPRV for TCS Output
45 Attachment CAN Data Link (+) Input/Output
46 Attachment CAN Data Link (-) Input/Output
47 CAN (J1939) Data Link (+) Input/Output
48 CAN (J1939) Data Link (-) Input/Output
49 CAN (J1939) Data Link Shield Ground
50 Machine CAN Data Link (+) Input/Output
51 Machine CAN Data Link (-) Input/Output
53 NFC 1 Limit EPRV for TCS Output
(1) The ECM responds to an active input only when all the necessary conditions are satisfied.
(2) The connector contacts that are not listed are not used.