HEATER GP-JACKET WATER 3837492 - Caterpillar

3837492 HEATER GP-JACKET WATER Caterpillar parts D7R II

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3837492
383-7492
3837492

Caterpillar 3837492 HEATER GP-JACKET WATER

Buy HEATER GP-JACKET WATER 3837492 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3837492:

TRACK-TYPE TRACTOR D7R II Caterpillar

Number on catalog scheme:

Caterpillar 3837492 Parts scheme HEATER GP-JACKET WATER

For full view, you need register

Caterpillar SIS machinery equipment:

Caterpillar SIS

D7R Series II TRACK-TYPE TRACTOR MILITARY KNA00001-UP (MACHINE) POWERED BY 3176C Engine » 383-7492 HEATER GP-JACKET WATER

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

D7R Series II TRACK-TYPE TRACTOR MILITARY KNA00001-UP (MACHINE) POWERED BY 3176C Engine

383-7491: COLD WEATHER AR » SEBP50440005

Information:

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Clean the area around the drain plug and clean the area around the check/fill plug before removing the plugs.
Illustration 1 g00854970
Bottom view of the blade circle.
Illustration 2 g00108106
Remove drain plug (1). Remove the check/fill plug (2). Allow the oil to drain into a suitable container.
Clean the drain plug and install the drain plug.
Fill the circle drive housing with oil. See Operation and Maintenance Manual, "Refill Capacities".
Clean the check/fill plug and install the check/fill plug.
Start the engine. Operate the machine for a few minutes. Check the circle drive housing for leaks.
Stop the engine. Remove the check/fill plug and check the oil level. Maintain the oil level to the bottom of the filler opening. If necessary, add oil.
Install the check/fill plug.