HEATER & MTG GP-CAB 4632118 - Caterpillar

Illustration 1 g00580288
Rotation of the pump is counterclockwise when the pump is viewed from the drive end.Propel pump Type ... variable displacement Displacement ... 100 cc (6.1 in3) Pressure limiter setting ... 42000 1035 kPa (6090 150 psi) (1) Charge pump Type ... gerotor Displacement ... 20 cc (1.2 in3) Charge pressure relief setting ... 2415 70 kPa (350 10 psi)Electrical Displacement Control (EDC)
Illustration 2 g00581763
(1) Pressure Control Pilot (PCP) Type ... dual coil Maximum continuous voltage ... 7.5 VDC Current at threshold ... 14 3 mA Current at full stroke ... 85 18 mA Maximum input current ... 250 mA Resistance at 21 °C (70 °F) ... 26 OhmsTighten the screw in order to secure the pressure control pilot to the housing to the following torque. ... 5 N m (44.25 lb in)Multifunction Valve
Illustration 3 g00581178
(1) Tighten the bypass actuator nut to the following torque. ... 40 N m (30 lb ft) (2) Pressure limiter setting ... 42000 1035 kPa (6090 150 psi) (3) Tighten the nut to the following torque. ... 16 N m (12 lb ft)Charge Relief Valve
Illustration 4 g00581149
(1) Tighten the locknut to the following torque. ... 51 5 N m (37.5 3.5 lb ft) (2) Relief valve pressure setting ... 2415 70 kPa (350 10 psi)