HEATER-COOLANT 4725367 - Caterpillar

Illustration 2 g03747563
Overview of the 460-7633 Coupler Wiring Gp
Illustration 3 g03747564
460-7633 Coupler Wiring Gp connection locationsInstallation Procedure
Illustration 4 g03747565
Close up of Area A (AL-C1) Connect to harness (2 POLES), "779 WH" (AL-C2) Connect to harness (4 POLES), "A464 GY", "M968 BU", "J850 WH", "E404 BU" (2) 7K-1181 Cable Strap (5) 461-3431 Chassis Harness As
Connect harness (5) to main chassis harness as shown.
Illustration 5 g03747996
Close up of Area B (AL-M1) Chassis Ground, "235 BK" (2) 7K-1181 Cable Strap (5) 461-3431 Chassis Harness As
Connect harness (5) to the ground point as shown.
Illustration 6 g03747999
Close up of Area C (AL-C3) Connect to Quick Coupler Hold to Run Solenoid, "M968 BU", "235 BK" (AL-C4) Connect to Quick, "779 WH", "235 BK" (1) 3S-2093 Cable Strap (2) 7K-1181 Cable Strap (5) 461-3431 Chassis Harness As (6) 132-5789 Clip (8) 4P-7581 Clip (9) 8T-4121 Hard Washer (10) 8T-4137 Bolt
Route harness (5) to the quick coupler solenoid valves as shown.
Illustration 7 g03748001
Close up of Area D (AL-C5) Connect to Bucket "IN" Pressure Switch, "A464 GY", "235 BK" (AL-C6) Connect to Bucket Cylinder Head Pressure Sensor, "J850 WH", "235 BK", "E404 BU" (1) 3S-2093 Cable Strap (3) 266-7379 Cable Strap (5) 461-3431 Chassis Harness As (7) 204-1611 Strap
Route harness (5) to sensors on the main control valve as shown.
Tighten all hardware to standard torque.