HEATER GP-GATE 4901681 - Caterpillar

Bucket Positioner - Tilt Adjustment
Sudden or unexpected movement of the machine or implements can cause possible personal injury.Lower all equipment, apply the parking brake, stop the engine and block the tires.
1. Lower the bucket to the ground.2. Position the bucket at the desired angle to the ground. Stop the engine and turn the key to ON. Move the tilt control to TILT BACK detent. 3. Loosen two bracket bolts (1). Move the tube assembly (2) toward the bucket. When the switch aligns with the magnet the tilt lever should move from the TILT BACK to the HOLD position. 4. To test the adjustment, start the engine. Raise and dump the bucket. Move the tilt control lever to TILT BACK detent. 5. When the pre-set bucket angle is reached, the tilt control lever should return to HOLD.Bucket Lift Kickout
Use caution to avoid possible personal injury when adjusting the bucket lift kickout.Keep personnel off the machine. Clear the area when working under or around the bucket linkage.With the bucket raised, proper support must be provided for the bucket and/or the linkage.
1. Start the engine. Raise the bucket to the desired height and stop the engine.2. Block the bucket and the linkage. 3. Loosen the plate clamp bolts. Align the plate and the switch assembly with the magnet. 4. Move the switch away from the magnet to increase, or toward the magnet to decrease the bucket lift kickout height. 5. Tighten the bolts. Check the adjustment.6. Start the engine and move the bucket lift control to the RAISE detent. 7. At the pre-set lift height, the control lever should return to HOLD.