HEATER AS-SCREED 5595533 - Caterpillar

5595533 HEATER AS-SCREED Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5595533
559-5533
5595533

Weight: 6 pounds 2 kg.

Buy HEATER AS-SCREED 5595533 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 2 request: Show. This information for suppliers only!

#1224917 5595533

2023-10-17

#1010252 5595533

2022-11-19

Number on catalog scheme: 25

Caterpillar 5595533 Parts scheme HEATER AS-SCREED

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01242428
Remove bolts (2) from cover (1) for the harness assembly. Position cover (1) for the harness assembly out of the way.
Illustration 2 g06094588
Remove bolts (3). Remove bolt (5). Remove connector (6) and the end section of air inlet manifold (4) and the gaskets.
Illustration 3 g06094610
Remove hose assembly (7). Remove bolts (8) and disconnect tube assembly (9). Remove bolts (10) and disconnect tube assembly (11).
Illustration 4 g06094615
Attach a suitable lifting device onto regulator assembly (12). The weight of regulator assembly (12) is approximately 34 kg (75 lb). Remove bolts (13). Remove regulator assembly (12).
Illustration 5 g06094618
Remove bolts (14) and (15). Remove elbow (16) and the flange assembly.
Illustration 6 g06094623
Attach Tooling (A) and a suitable lifting device onto engine oil pump (18). The weight of engine oil pump (18) is approximately 50 kg (110 lb). Remove bolts (17). Lower engine oil pump (18) from the engine.
Illustration 7 g06094698
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (19) and covers (20) from regulator assembly (12).
Illustration 8 g06094718
Remove O-ring seals (20).
Illustration 9 g06094904
Remove spring (24), shims (23), and relief stem (22) for the maximum pressure relief valve. Remove spring (27), shims (26), and regulator stem (27) for the regulator valve.Note: Note the quantity of shims (23) and shims (26) for assembly purposes.
Illustration 10 g06094921
Remove bolts (28) and engine oil pump assembly (29).