HEATER GP 7X1999 - Caterpillar

particles that are suspended in the oil to be drained properly.Ensure that all adjustments, maintenance and repairs are performed by authorized personnel that have the correct training.Ensure that the vessel that will be used is large enough to collect the waste oil.Failure to follow this recommended procedure will cause the waste particles to be recirculated through the engine lubrication system with the new oil.
Illustration 1 g01630673
Typical example
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repair is performed.
Remove drain plug (1). Install drain line to the connection.
Open drain valve (2). Allow the engine oil to drain. After the oil has drained, close the drain valve.
Remove drain line and install a new drain plug. Tighten the drain plug securely. Note: Some application may have a pump in order to remove the engine oil. Connect a drain line to the pump. Unlock the pump and operate the pump in order to remove the engine oil. After the oil has been removed, lock the pump and remove the drain line.Fill the Oil Pan
Remove the oil filler cap. Refer to