AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N4913 FUEL INJECTION PUMP GROUP Engine Serial No. 70V3506 to 70V3510 & 70V3512-Up Part of 6N2539 Fuel Pump Housing and Governor Group shown on Page 64A 6N1043 Fuel Injection Pump parts are shown on Page 66 245


FUEL SYSTEM
PUMP GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
GOVERNOR GP

EXCAVATOR 245 EXCAVATOR 94L
 245 EXCAVATOR 94L00001-00254 (MACHINE) POWERED BY 3406 ENGINE HEBP1066 245 94L   (1976)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
4N-8008 DRIVE GP-GOVERNOR & FUEL PUMP
GOV & FUEL INJ PUMP GP
6N-2539 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-2539 GOV & FUEL INJ PUMP GP
FUEL INJECTION PUMP GROUP
4N-0817 FUEL INJECTION PUMP GROUP
FUEL INJECTION PUMP GROUP
4N-0817 FUEL INJECTION PUMP GROUP
PUMP GP-FUEL INJECTION
6N-4913 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6N-1043 PUMP GP-FUEL INJECTION
COVER GP-TACHOMETER DRIVE
4N-4966 COVER GP-TACHOMETER DRIVE
 

#HEBP10660100
 

6N-4913: PUMP GP-FUEL INJECTION

6N4913 FUEL INJECTION PUMP GROUP
Engine Serial No. 70V3506 to 70V3510 & 70V3512-Up
Part of 6N2539 Fuel Pump Housing and Governor Group shown on Page 64A
6N1043 Fuel Injection Pump parts are shown on Page 66
c218501 HEBP1066
6N4913 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [6] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 6N-1043 Y [6] PUMP GROUP  
    (Separate Illustration)
5. 9S-4181 [1] PLUG  
6. 7M-8485 [1] O-RING  
7. 2P-8617 [1] RACK  
8. 4N-7354 [1] SPACER  
9. 5M-2697 [6] SPACER .1700 in.(4.32 mm) thick  
  2M-4208 [6] SPACER .1740 in.(4.42 mm) thick  
  2M-4209 [6] SPACER .1780 in.(4.52 mm) thick  
  2M-4210 [6] SPACER .1820 in.(4.62 mm) thick  
  2M-4211 [6] SPACER .1860 in.(4.72 mm) thick  
  2M-4212 [6] SPACER .1900 in.(4.83 mm) thick  
  5M-2691 [6] SPACER .1940 in.(4.93 mm) thick  
  5S-7189 [6] SPACER .1980 in.(5.03 mm) thick  
10. 4N-7353 [1] PLATE  
11. 6N-4923 [1] PLATE  
12. 3S-9736 [6] LIFTER ASSEM.  
13. 0S-1618 [4] BOLT  
14. 7F-8036 [1] LOCK  
  9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
  [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 4N-0818 [1] CAMSHAFT ASSEM.  
21. 9F-7882 [1] DOWEL  
22. 6N-4448 [1] HOUSING ASSEM.  
23. 4B-9782 [1] BALL  
24. 4M-1474 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 5M-6214 [3] PLUG  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 9F-2247 C [1] PLUG  
30. 9S-9702 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 1S-1953 [1] BEARING  
33. 4B-4158 [4] SCREW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP10660101
 

6N-1043: PUMP GP-FUEL INJECTION

6N1043 FUEL INJECTION PUMP GROUP
Part of 4N817 and 6N4913 Fuel Injection Pump Groups shown on
Pages 64B, 64C & 65
c157288 HEBP1066
6N1043 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-3652 [1] WASHER  
2. 1S-8634 [1] SPRING  
3. 4N-2484 [1] BONNET  
4. 2S-1631 [1] VALVE  
5. 1M-3506 [1] RING  
6. 4N-4997 [1] PLUNGER & BARREL ASSEM.  
7. 1S-7592 [1] SPRING  
 

#HEBP10660102
 

4N-1210: CONTROL GP-FUEL RATIO

4N1210 FUEL RATIO CONTROL GROUP
c208822 HEBP1066
4N1210 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5125 [1] ELBOW  
2. 9L-5120 [1] HOSE ASSEM.  
3. 4N-4678 RY [1] CONTROL GROUP  
    (Separate Illustration)
4. 4N-8112 [2] BOLT 3.25 in.(8.26 cm) long  
  9M-1974 [2] WASHER  
5. 2P-8643 [1] GASKET  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#HEBP10660103
 

4N-4678: CONTROL GP-FUEL RATIO

4N4678 FUEL RATIO CONTROL GROUP
Engine Serial No. 70V1 to 70V2555 inclusive. Part of 4N1210 Fuel Ratio Control
Group shown on Page 66
c153454 HEBP1066
4N4678 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8939 [1] VALVE  
2. 5P-0537 [3] WASHER  
3. 4J-2506 [1] SEAL  
4. 6L-5766 [1] GASKET  
5. 2P-8226 [1] COVER  
6. 2P-8804 [1] DIAPHRAGM  
7. 2P-8875 [1] RETAINER ASSEM.  
8. 6N-0515 [1] SPRING (inner)  
9. 5K-0227 C [1] SEAL  
10. 2P-8225 [1] HOUSING  
11. 2P-8802 [1] VALVE ASSEM.  
12. 2P-8234 [1] SEAL  
13. 2P-8801 [1] RETAINER  
14. 6N-0514 [1] SPRING (outer)  
15. 2P-8803 [1] WASHER  
16. 4B-3388 C [2] BOLT  
  8F-7242 [2] WASHER  
17. 6N-0513 [1] SPRING  
18. 2P-8882 [1] COVER  
19. 9F-7882 C [1] PIN  
20. 0S-1615 C [2] BOLT .75 in.(19.05 mm) long)  
  0S-1347 [1] BOLT .187 in.(4.75 mm) long  
  C   INDICATES CHANGE
 

#HEBP10660104
 

4N-4678: CONTROL GP-FUEL RATIO

4N4678 FUEL RATIO CONTROL GROUP
Engine Serial No. 70V2556-Up. Part of 4N1210 Fuel Ratio Control Group shown on Page 66
c214016 HEBP1066
4N4678 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8939 [1] VALVE  
2. 9S-5282 C [3] WASHER  
3. 4J-2506 [1] SEAL  
4. 6L-5766 [1] GASKET  
5. 2P-8226 [1] COVER  
6. 2P-8804 [1] DIAPHRAGM  
7. 2P-8875 [1] RETAINER ASSEM.  
8. 6N-0515 [1] SPRING (inner)  
9. 5K-0227 [1] SEAL  
10. 2P-8225 [1] HOUSING  
11. 2P-8802 [1] VALVE ASSEM.  
12. 2P-8234 [1] SEAL  
13. 2P-8801 [1] RETAINER  
14. 7N-0209 C [1] SPRING (outer)  
15. 2P-8803 [1] WASHER  
16. 4B-3388 [2] BOLT  
  8F-7242 [2] WASHER  
17. 6N-0513 [1] SPRING  
18. 6N-7148 C [1] COVER  
19. 5P-5587 C [1] PIN  
20. 0S-1615 [2] BOLT 19.05 mm(.75 in.) long  
  0S-1347 [1] BOLT 4.75 mm(.187 in.) long  
  C   INDICATES CHANGE
 

#HEBP10660105
 

6N-4557: GOVERNOR GROUP

6N4557 GOVERNOR GROUP--Part 1 of 2
Engine Serial No. 70V1 to 70V2717 inclusive. Part of 6N2539 Fuel Pump Housing and
Governor Group shown on Page 64
c208838 HEBP1066
6N4557 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8697 [1] GASKET  
2. 3P-0009 [1] INSULATOR  
3. 9S-4468 [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 9M-6302 [2] WASHER  
6. 9M-6303 [1] SPRING  
7. 2S-0008 [1] SEAT  
8. 2S-0007 [1] SLEEVE  
9. 7B-8105 [1] LOCK  
10. 2N-0479 [1] WEIGHT ASSEM.  
    (Includes)
  2N-0477 [2] WEIGHT  
11. 1S-5440 [2] DOWEL  
12. 9M-6293 [1] LOCK  
13. 0S-1615 [3] BOLT  
14. 4N-3383 [1] PISTON ASSEM.  
    (Includes)
  7S-8447 [1] PISTON AND VALVE ASSEM.  
15. 4N-3507 [1] CYLINDER  
16. 4N-0820 [1] SLEEVE  
17. 8M-8997 [1] SEAL  
18. 3K-0810 [1] RING  
19. 7M-7219 [1] BEARING  
20. 7M-7193 [2] RACE  
21. 8M-8993 [1] RING  
22. 8M-8726 [1] DOWEL  
23. 6N-3504 [1] SEAT  
24. 8H-9181 [1] SPRING  
25. 8M-8739 [1] BOLT  
26. 2P-8679 [1] STRAINER ASSEM.  
27. 9M-4704 [1] SCREW  
28. 8L-4154 [1] COLLAR  
29. 8L-4155 [1] SCREW  
  5S-9607 [1] NUT  
30. 6N-6116 C [1] COVER  
31. 3P-0131 [1] SPRING  
32. 9S-4673 [1] BAND ASSEM.  
  C   INDICATES CHANGE
 

#HEBP10660106
 

6N-4557: GOVERNOR GROUP

6N4557 GOVERNOR GROUP--Part 2 of 2
Engine Serial No. 70V1 to 70V2717 inclusive. Part of 6N2539 Fuel Pump Housing and
Governor Group shown on Page 64
c155723 HEBP1066
6N4557 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1810 [1] HOUSING ASSEM.  
    (Includes)
2. 4F-4585 [1] PLUG  
3. 8S-0134 [1] BEARING  
4. 4N-4879 [1] PLUG  
5. 9S-0798 [1] BEARING  
6. 5B-5620 [4] BOLT  
7. 5L-8991 [1] GASKET  
8. 8S-8952 [1] SCREW (high idle)  
9. 4N-4063 [1] LEVER ASSEM.  
    (Includes)
  9S-4466 [1] LEVER ASSEM.  
10. 5H-1351 [1] PIN  
11. 4L-9971 [1] SPRING  
12. 9M-9788 [1] PLUNGER  
13. 5L-8997 [1] SCREW (low idle)  
14. 2J-0157 [2] SEAL  
15. 5L-8992 [1] COVER  
16. 6L-1756 [1] BOLT  
17. 9M-1974 [4] WASHER  
18. 4B-9747 [1] WASHER  
19. 9M-8720 [1] BOLT  
20. 8L-8883 [1] SHAFT  
21. 5P-3272 [1] SEAL  
22. 8H-9204 [1] WASHER  
 

#HEBP10660107
 

6N-4557: GOVERNOR GROUP

6N4557 GOVERNOR GROUP--Part 1 of 2
Engine Serial No. 70V2718 to 70V3505 & 70V3511 inclusive
Part of 6N2539 Fuel Pump Housing and Governor Group shown on Page 64
c160370 HEBP1066
6N4557 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8697 [1] GASKET  
2. 3P-0009 [1] INSULATOR  
3. 9S-4468 [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 9M-6302 [2] WASHER  
6. 9M-6303 [1] SPRING  
7. 6N-8629 C [1] SEAT  
8. 2S-0007 [1] SLEEVE  
9. 7B-8105 [1] LOCK  
10. 2N-0479 [1] WEIGHT ASSEM.  
    (Includes)
  2N-0477 [2] WEIGHT  
11. 1S-5440 [2] DOWEL  
12. 9M-6293 [1] LOCK  
13. 0S-1615 [3] BOLT  
14. 4N-3383 [1] PISTON ASSEM.  
    (Includes)
  7S-8447 [1] PISTON AND VALVE ASSEM.  
15. 4N-3507 [1] CYLINDER  
16. 4N-0820 [1] SLEEVE  
17. 8M-8997 [1] SEAL  
18. 3K-0810 [1] RING  
19. 7M-7219 [1] BEARING  
20. 7M-7193 [2] RACE  
21. 2P-8630 C [1] DOWEL  
22. 4N-3887 C [1] RING  
23. 6N-3504 [1] SEAT  
24. 8H-9181 [1] SPRING  
25. 8M-8739 [1] BOLT  
26. 2P-8679 [1] STRAINER ASSEM.  
27. 9M-4704 [1] SCREW  
28. 8L-4154 [1] COLLAR  
29. 8L-4155 [1] SCREW  
  1B-4201 C [1] NUT  
30. 6N-6116 [1] COVER  
31. 3P-0131 [1] SPRING  
32. 9S-4673 [1] BAND ASSEM.  
  C   INDICATES CHANGE
 

#HEBP10660108
 

6N-4557: GOVERNOR GROUP

6N4557 GOVERNOR GROUP--Part 2 of 2
Engine Serial No. 70V2718 to 70V3505 & 70V3511 inclusive
Part of 6N2539 Fuel Pump Housing and Governor Group shown on Page 64
c155723 HEBP1066
6N4557 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1810 [1] HOUSING ASSEM.  
    (Includes)
2. 4F-4585 [1] PLUG  
3. 8S-0134 [1] BEARING  
4. 4N-4879 [1] PLUG  
5. 9S-0798 [1] BEARING  
6. 5B-5620 [4] BOLT  
7. 5L-8991 [1] GASKET  
8. 8S-8952 [1] SCREW (high idle)  
9. 4N-4063 [1] LEVER ASSEM.  
    (Includes)
  9S-4466 [1] LEVER ASSEM.  
10. 5H-1351 [1] PIN  
11. 4L-9971 [1] SPRING  
12. 9M-9788 [1] PLUNGER  
13. 5L-8997 [1] SCREW (low idle)  
14. 2J-0157 [2] SEAL  
15. 5L-8992 [1] COVER  
16. 6L-1756 [1] BOLT  
17. 9M-1974 [4] WASHER  
18. 4B-9747 [1] WASHER  
19. 9M-8720 [1] BOLT  
20. 8L-8883 [1] SHAFT  
21. 5P-3272 [1] SEAL  
22. 8H-9204 [1] WASHER  
 

#HEBP10660109
 

7N-2335: GOVERNOR GP

7N2335 GOVERNOR GROUP--Part 1 of 3
Engine Serial No. 70V3506 to 70V3510 and 70V3512-Up
Part of 6N2539 Fuel Pump Housing and Governor Group shown on Page 64A
c213747 HEBP1066
7N2335 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-8697 [1] GASKET  
2. 3P-0009 [1] INSULATOR  
3. 9S-4468 [1] BOLT  
4. 2F-4159 [1] LOCK  
5. 7B-8105 [1] LOCK  
6. 2N-0479 [1] WEIGHT ASSEM.  
7. 9S-4673 [1] BAND ASSEM.  
8. 9M-6293 [1] LOCK  
9. 0S-1615 [3] BOLT  
10. 4N-3383 [1] PISTON ASSEM.  
    (Includes)
  7S-8447 [1] PISTON AND VALVE ASSEM.  
11. 4N-3507 [1] CYLINDER  
12. 4N-0820 [1] SLEEVE  
13. 8M-8997 [1] SEAL  
14. 2P-8679 [1] STRAINER ASSEM.  
15. 6N-6116 [1] COVER  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 245 :

FUEL INJECTION PUMP GROUP
4N-0817 FUEL INJECTION PUMP GROUP
FUEL INJECTION PUMP GROUP
4N-0817 FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-2539 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-2539 GOV & FUEL INJ PUMP GP
DRIVE GP-GOVERNOR & FUEL PUMP
4N-8008 DRIVE GP-GOVERNOR & FUEL PUMP
TORQUE CONTROL GP
4N-4267 TORQUE CONTROL GP
CAP GP-PROTECTION
1P-8678 CAP GP-PROTECTION
TANK GP-FUEL
8K-9952 TANK GP-FUEL
PUMP GP-FUEL INJECTION
6N-1043 PUMP GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
4N-1210 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4N-4678 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4N-4678 CONTROL GP-FUEL RATIO
GOVERNOR GROUP
6N-4557 GOVERNOR GROUP
GOVERNOR GROUP
6N-4557 GOVERNOR GROUP
GOVERNOR GROUP
6N-4557 GOVERNOR GROUP
GOVERNOR GROUP
6N-4557 GOVERNOR GROUP

Truck sale:

Caterpillar BG-2455D, Asphalt Pavers, Construction
15,192 
Caterpillar BG-2455D, Asphalt Pavers, Construction
- Asphalt Pavers
MILTON CAT
Caterpillar 245
 
Caterpillar 245
- Crawler Excavators
FOLEY, INC.
Caterpillar BG2455C, Asphalt Pavers, Construction
21,201 
Caterpillar BG2455C, Asphalt Pavers, Construction
- Asphalt pavers
TOROMONT CAT
1983 CAT 245
 
1983 CAT 245

Yellow Parts S.L.
1985 CAT 245
USD $24,045 
1985 CAT 245

Alaskan Equipment Sales
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.