4K6037 LOW SPEED GEAR GROUP Note: This Group provides the following speeds: (Forward) First--1.8, Second--2.4, Third--3.0, Fourth--3.4 & Fifth--4.4 M.P.H. (Reverse) First--2.2, Second--2.9, Third--3.5, Fourth--4.0 & Fifth--5.2 M.P.H. AN ATTACHMENT D4D

POWER TRAIN

TRANSMISSION GP

0. 4K-6037 LOW SPEED
1. 5K-8017 GEAR GP-LO

OPERATOR STATION

CONTROL GP-TRANSMISSION

2. 4K-5029 GEAR SHIFT
3. 4K-5029 GEAR SHIFT

POWER TRAIN

DRIVE GP-FINAL

4. 6K-4665 FINAL DRIV
5. 6K-4665 FINAL DRIV

CLUTCH GP

6. 4K-5034 FLYWHEEL C
7. 4K-5034 FLYWHEEL C
8. 4K-5034 FLYWHEEL C

PUMP GP

9. 7S-7602 OIL PUMP G
0. INFORMATION

TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 60J
D4D TRACTOR / DIRECT DRIVE / 60J04376-UP (MACHINE) POWERED BY 3304 ENGINE HEBP1082 D4D 60J (1968)

POWER TRAIN

TRANSMISSION GP

4K-5035 TRANSMISSION GROUP

5K-5032 TRANSMISSION CASE AND COVERS GROUP

4K-6037 LOW SPEED GEAR GROUP

5K-8017 GEAR GP-LOW SPEED

#HEBP10820170

4K-6037: LOW SPEED GEAR GROUP

LOW SPEED GEAR GROUP

4K6037 LOW SPEED GEAR GROUP
Note: This Group provides the following speeds: (Forward) First--1.8,
Second--2.4, Third--3.0, Fourth--3.4 & Fifth--4.4 M.P.H. (Reverse) First--2.2,
Second--2.9, Third--3.5, Fourth--4.0 & Fifth--5.2 M.P.H. AN ATTACHMENT

c72441 HEBP1082

4K6037 LOW SPEED GEAR GROUP Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5M-2477	[1]	PLATE (NUMBER)
		(NOT SHOWN-MOUNTED ON REAR OF STEERING CLUTCH CASE)
4K-6038	[1]	GEAR (21 TEETH)
1K-7978	[1]	GEAR (36 AND 40 TEETH)
1K-7973	[1]	GEAR (28 TEETH)
1K-7962	[1]	GEAR (30 AND 34 TEETH)
1K-7977	[1]	GEAR (27 TEETH)
1K-7974	[1]	GEAR (31 AND 33 TEETH)

#HEBP10820171

5K-8017: GEAR GP-LOW SPEED

GEAR GP-LOW SPEED

5K8017 LOW SPEED GEAR GROUP
Note: This Group provides the following speeds: (Forward) First--1.5,
Second--2.0, Third--3.0, Fourth--3.4 & Fifth 4.4 M.P.H. (Reverse) First--1.7,
Second--2.3, Third--3.5, Fourth--4.0 & Fifth 5.1 M.P.H. AN ATTACHMENT

c95412 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5K-8004	[1]	PLATE (NUMBER)
		(NOT SHOWN-MOUNTED ON REAR OF STEERING CLUTCH CASE)
1M-1695	[1]	GEAR (22 TEETH)
4K-5781	[1]	GEAR (18 TEETH)
1M-1694	[1]	GEAR (39 AND 43 TEETH)
1K-7973	[1]	GEAR (28 TEETH)
1K-7962	[1]	GEAR (30 AND 34 TEETH)
1K-7977	[1]	GEAR (27 TEETH)
1K-7974	[1]	GEAR (31 AND 33 TEETH)

#HEBP10820172

4K-5029: GEAR SHIFT CONTROL GROUP

GEAR SHIFT CONTROL GROUP

4K5029 GEAR SHIFT CONTROL GROUP--Front View--Part 1 of 2

c202520 HEBP1082

4K5029 GEAR SHIFT CONTROL GROUP Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
2A-1736	[ 1]	HANDLE
1M-5063	[ 1]	LEVER
4K-5090	[ 1]	SHAFT
4K-5072	[ 1]	SHAFT (CENTER)
4J-3923	[ 1]	SEAL
4B-3728	[ 3]	PLUNGER
3K-5733	[ 4]	SPRING
4K-5075	[ 1]	SHAFT (RIGHT HAND)
7B-5670	[ 2]	BEARING
8F-5340	[ 2]	SEAL
4K-5367	[ 1]	BRACKET
3B-8488	[ 1]	FITTING
1B-8714	[ 1]	KEY
4K-5365	[ 1]	SHAFT
1A-1460	[ 1]	BOLT
1D-4719	[ 1]	NUT
1M-1945	[ 1]	FORK (RIGHT HAND)
1A-6766	[ 1]	SET SCREW
8M-4867	[ 1 FOOT]	LOCKWIRE
7B-3235	[ 3]	BOLT
3B-4508	[ 3]	LOCKWASHER
4K-5796	[ 1]	FORK (CENTER)
1A-6766	[ 1]	SET SCREW
8M-4867	[ 1 FOOT]	LOCKWIRE
0L-1170	[ 1]	HANDLE
4K-5037	[ 1]	RETAINER
4K-5064	[ 1]	SHAFT (LEFT HAND)
4K-5042	[ 1]	LEVER
6B-9557	[ 1]	KEY
1A-1460	[ 1]	BOLT
1D-4719	[ 1]	NUT
0S-0509	[ 2]	BOLT
0L-0364	[ 2]	LOCK
4K-5022	[ 1]	PLUNGER
6K-8405	[ 1]	SHAFT
0S-1618	[ 3]	BOLT
3B-4505	[ 3]	LOCKWASHER
4B-4277	[ 3]	WASHER
6K-8404	[ 1]	BEARING
4K-5038	[ 1]	LEVER
1B-9575	[ 1]	BOLT
1D-4716	[ 1]	NUT
3B-4505	[ 1]	LOCKWASHER
4B-4283	[ 1]	WASHER
4F-4584	[ 1]	SEAL
1T-0550	[ 1]	PIN
4K-5077	[ 1]	GASKET
4B-4283	[ 1]	WASHER
3B-4618	[ 1]	COTTER PIN
4K-5055	[ 1]	SHAFT
4K-5171	[ 1]	FORK
1A-6766	[ 1]	SET SCREW
8M-4867	[ 1 FOOT]	LOCKWIRE
1M-1946	[ 1]	FORK (LEFT HAND)
1A-6766	[ 1]	SET SCREW
8M-4867	[ 1 FOOT]	LOCKWIRE

#HEBP10820173

4K-5029: GEAR SHIFT CONTROL GROUP

GEAR SHIFT CONTROL GROUP

4K5029 GEAR SHIFT CONTROL GROUP--Side View--Part 2 of 2

c86867 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1M-1881	[ 1]	LEVER
		(PART OF GATE ASSEM.1M1899)
3B-4618	[ 1]	COTTER PIN
0L-0887	[ 1]	COVER
0L-1045	[ 1]	SPRING
0L-0888	[ 1]	COVER
8F-8080	[ 1]	RING
2H-2525	[ 2]	PIN
4K-0039	[ 1]	LEVER
1B-8714	[ 1]	KEY
0S-0175	[ 1]	PIN
3B-4617	[ 1]	COTTER PIN
2D-4116	[ 1]	ROD
0L-1351	[ 2]	BOLT
0L-0364	[ 2]	LOCK (1125" LONG)
4K-5930	[ 1]	LOCK (4.50" LONG)
0S-1595	[ 2]	BOLT
1C-0155	[ 2]	LOCK
1K-4703	[ 2]	WASHER
4K-5041	[ 1]	BRACKET (REAR)
1B-4430	[ 1]	NUT
6F-7010	[ 1]	ROD END
0S-0175	[ 1]	PIN
3B-4617	[ 1]	COTTER PIN
1M-1840	[ 1]	HOUSING
3B-8453	[ 1]	SEAL
8F-8079	[ 1]	BOOT
1B-4203	[ 4]	NUT
3B-4506	[ 4]	LOCKWASHER
0L-0974	[ 1]	PACKING
2H-2526	[ 2]	SHAFT
2H-2521	[ 4]	BEARING
2H-2522	[ 1]	PIN
		(PARTS OF GATE ASSEM.1M1899)
9H-0285	[ 1]	ADAPTER
3D-8799	[ 1]	GASKET
1M-1899	[ 1]	GATE ASSEM.
1A-1460	[ 1]	BOLT
1D-4719	[ 1]	NUT
0S-1595	[ 2]	BOLT
1C-0155	[ 2]	LOCK
1K-4703	[ 2]	WASHER
4K-5024	[ 1]	BRACKET (FRONT)
4K-5023	[ 1]	LEVER
0S-1587	[ 1]	BOLT
1B-8714	[ 1]	KEY

#HEBP10820174

6K-4665: FINAL DRIVE GROUP

FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Upper Half--Part 1 of 2

c215182 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1825	[28]	BOLT
2M-0849 C	[28]	WASHER
7K-7333	[2]	RETAINER
0S-1591	[12]	BOLT
5M-2894 C	[12]	WASHER
3K-9619	[2]	SEAL
1H-9456 C	[4]	BOLT
9K-4058	[2]	LOCK
2J-5815	[2]	NUT
2B-6325	[2]	GASKET
		NOTE: QUANTITIES SHOWN ARE REQUIRED FOR BOTH R.H. AND L.H. SIDES
7K-8238	[2]	FLANGE
7K-8237	[2]	DRUM
7M-7260		GASKET SOLUTION
9K-7173 C	[2]	CASE ASSEM.
0L-1392	[8]	STUD
		(4 in each 9K7173 Assem.)
5B-7267	[4]	CORK
2A-3746	[2]	PLUG
9K-3230 C	[2]	DOWEL
7K-3007	[2]	GASKET
5K-1311	[2]	GASKET
3F-4746	[2]	DOWEL
4H-0254	[2]	DOWEL
1M-1930	[2]	CAGE
1M-1795	[2]	SPACER
5P-6373 C	[2]	RACE AND ROLLER ASSEM.
3B-3969	[2]	RACE (INNER)
5P-6372 C	[2]	RACE AND ROLLER ASSEM.
5P-6377 C	[2]	RACE (OUTER)
7K-4770	[2]	PINION (9 TEETH)
5P-6380 C	[2]	RACE AND ROLLER ASSEM.
2M-0533	[2]	RACE (INNER)
C		INDICATES CHANGE

#HEBP10820175

6K-4665: FINAL DRIVE GROUP

FINAL DRIVE GROUP

6K4665 FINAL DRIVE GROUP--Lower Half--Part 2 of 2
Note: 1V3672 Snow Sprocket Replacement Rim is available

c215183 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
3F-1530	[2]	GUARD
1B-4203	[8]	NUT
3B-4506	[8]	LOCKWASHER
3K-3815	[20]	BOLT (1.75" long
7H-3607 C	[20]	NUT
6K-4618	[2]	HUB
1A-2610	[4]	DOWEL
4B-9374	[2]	CUP
4B-9373	[2]	CONE
7H-2742	[2]	NUT
2B-8847	[2]	RING
2B-8093	[2]	PIN
6K-4617	[2]	SHAFT
8K-6521	[2]	PLATE
0S-1585	[28]	BOLT
3B-4508	[28]	LOCKWASHER
0S-1585	[16]	BOLT
2M-0849	[16]	WASHER
4K-6049 R	[4]	SEAL GROUP
4K-0212	[4]	RETAINER
2K-2939	[4]	SEAL
4F-6029	[4]	GUARD
3A-2339	[12]	RIVET
		(1 2 OF EACH IN EACH SPROCKET ASSEM. 7K5481)
1B-5170	[2]	PLUG
4K-0173	[8]	RING
		(2 IN EACH SEAL GROUP 4K6049)
4F-8396	[2]	GUARD
4B-1322	[12]	SCREW
3B-4504	[12]	LOCKWASHER
7K-4771	[2]	GEAR (52 TEETH)
9K-9273 C	[2]	NUT
		NOTE: QUANTIES SHOWN ARE REQUIRED FOR BOTH R.H. AND L.H. SIDES
7K-5481	[2]	SPROCKET ASSEM. (Standard)
		NOTE: 7K2514 SPROCKET RIM IS AVAILABLE FOR REPLACEMENT OF WORN SPROCKET RIM.
0S-0509	[8]	BOLT
3B-4506	[8]	LOCKWASHER
0S-0509	[2]	BOLT
3B-4506	[2]	LOCKWASHER
1A-4145	[2]	LOCK
3J-0634 C	[2]	SEAL
3F-1547	[2]	SEAL
3F-1542	[2]	DOWEL
		(1 in each 9K9271 Assem.)
6B-3223	[2]	CUP
		(1 in each 9K6842 Assem.)
4B-7270	[2]	CONE
3H-2617	[4]	PIN (SPRING)
		(2 in Each Retainer Assem. 3F1554)
5K-5887	[2]	KEY
3F-1556	[2]	CAP
2B-8828	[2]	NUT
3F-1552	[8]	SHIM
5B-5821	[4]	PIN
		(2 in each 9K9271 Assem.)
2F-2815	[2]	LOCK
9K-9271 C	[2]	HOLDER ASSEM.
3F-1554	[2]	RETAINER ASSEM.
3F-1537	[2]	NUT
3F-1536	[2]	LOCK
3F-1548	[2]	BUSHING
		(1 in Each Support Assem. 1M1947)
0S-1587	[12]	BOLT
3B-4508	[12]	LOCKWASHER
3F-1555	[2]	GASKET
1M-1947	[2]	SUPPORT ASSEM.
3B-8486	[2]	FITTING
2M-0122	[4]	DOWEL
4B-1280	[16]	SCREW
3F-1546	[2]	RETAINER
9K-6842	[2]	CAGE ASSEM.
C		INDICATES CHANGE
R		REMFG PART MAY BE AVAILABLE

#HEBP10820176

4K-5034: FLYWHEEL CLUTCH GROUP

FLYWHEEL CLUTCH GROUP

4K5034 FLYWHEEL CLUTCH GROUP--Part 1 of 3
7S7602 Pump parts are shown on Page 107

c200784 HEBP1082

4K5034 FLYWHEEL CLUTCH GROUP Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
	[1]	COVER
1H-8946	[1]	SHOE ASSEM.
1H-8934	[1]	PIN
		(PART OF SHOE ASSEM. 1H8946)
3B-8686	[1]	FITTING
1H-8933	[1]	PIN
0L-1604	[1]	LOCK
1K-0485	[1]	WASHER
3B-4628	[1]	COTTER PIN
3H-1930	[1]	BOLT
7F-0502	[1]	WASHER
3H-1937	[1]	SPRING
1H-8938	[1]	LEVER
1B-4205	[1]	NUT
1F-7960	[1]	WASHER
1B-4430	[2]	NUT
6B-7988	[1]	PIN
1F-9489	[1]	WASHER
3B-4617	[1]	COTTER PIN
0S-0174	[1]	END
0S-0175	[1]	PIN
3B-4617	[1]	COTTER PIN
4K-5648	[1]	LEVER
0S-1625	[1]	BOLT
1D-4720	[1]	NUT
7B-2174	[1]	SEAL
1H-8379	[1]	FACING
6B-4284	[4]	RIVET
		(PARTS OF SHOE ASSEM. 1H8946)
2A-3630	[2]	DOWEL
7S-7602 Y	[1]	PUMP GROUP
		(SEE SEPARATE ILLUSTRATION)
0S-1594	[4]	BOLT (1"LONG)
0S-1588	[1]	BOLT (1.25"LONG)
3B-4506	[5]	LOCKWASHER
4K-5504	[1]	GAUGE ASSEM.
5H-7110	[1]	PLUG
0L-1124	[1]	GASKET
4B-0418	[1]	CLIP
0S-0509	[1]	BOLT
3B-4506	[1]	LOCKWASHER
4B-4278	[1]	WASHER
4K-5539	[1]	TUBE ASSEM.
		(24.08" LONG OVERALL - GAUGE ASSEM. TO FLYWHEEL CLUTCH)
4K-5515	[1]	SPOUT
0S-1585	[19]	BOLT
3B-4508	[19]	LOCKWASHER
0S-1588	[4]	BOLT
3B-4506	[4]	LOCKWASHER
3K-4733	[1]	GASKET
5F-2636	[3]	BEARING
4K-5435	[1]	SHAFT
3F-0957	[2]	DOWEL
1A-7669	[4]	BOLT
3B-4508	[4]	LOCKWASHER
0V-0531	[4]	WASHER
7H-2304	[1]	SCREEN ASSEM.
2K-5986	[1]	PIN
		(PART OF COVER ASSEM. 5M3656)
0S-1591	[2]	BOLT
3B-4506	[2]	LOCKWASHER
8H-9501	[2]	GASKET
4K-5537	[1]	GASKET
3H-4190	[1]	PLUG
2B-5721	[1]	GASKET
5M-3656	[1]	COVER ASSEM.
1A-2029	[6]	BOLT
3B-4506	[6]	LOCKWASHER
Y		SEPARATE ILLUSTRATION

#HEBP10820177

4K-5034: FLYWHEEL CLUTCH GROUP

FLYWHEEL CLUTCH GROUP

4K5034 FLYWHEEL CLUTCH GROUP--Part 2 of 3
5K5008 Drive Shaft parts are shown on Page 107

c200785 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1594	[6]	BOLT
3B-4506	[6]	LOCKWASHER
1H-8460	[1]	GASKET
1H-8459	[1]	COVER
8M-3999	[1]	WASHER
8M-4000	[1]	WASHER
2H-4450	[1]	WASHER
0S-1571	[6]	BOLT
3B-4506	[6]	LOCKWASHER
8B-5965	[1]	BEARING
1B-0581	[8]	BOLT
3B-4505	[8]	LOCKWASHER
5K-5008 Y	[1]	DRIVE SHAFT
		(SEE SEPARATE ILLUSTRATION)
0S-0509	[4]	BOLT
1H-8330	[2]	LOCK
1P-7045 C	[1]	GASKET
4K-5419	[1]	RETAINER
1H-8266	[1]	GASKET
4K-5421	[1]	GASKET
1S-8764	[1]	RING
2H-4482	[1]	COLLAR
2H-5330	[4]	BOLT
2H-4499	[4]	LOCK
2H-3525	[1]	OUTER RACE
2H-3517	[1]	INNER RACE AND ROLLER ASSEM.
2H-3548	[1]	RING
4K-5360	[1]	SHAFT
0T-0200	[1]	PLUG
2H-4498	[8]	SHAFT
2H-5046	[4]	LINK
2H-5048	[4]	LINK
9F-7101	[8]	BUSHING
2H-5047	[8]	ROLLER
3H-7347	[2]	LOCK ASSEM.
2F-7036	[2]	STUD
		(1 IN EACH LOCK ASSEM. 3H7347)
	[2]	PIN
		(1 IN EACH LOCK ASSEM. 3H7347)
1B-4203	[2]	NUT
2H-4386	[2]	PLATE
C		INDICATES CHANGE
Y		SEPARATE ILLUSTRATION

#HEBP10820178

4K-5034: FLYWHEEL CLUTCH GROUP

FLYWHEEL CLUTCH GROUP

4K5034 FLYWHEEL CLUTCH GROUP--Part 3 of 3

c200786 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5F-4061	[4]	RETAINER
2A-4429	[8]	LOCK
5H-5500	[1]	COLLAR
1H-8382	[1]	GEAR (46 TEETH)
3H-2645	[1]	WASHER
0S-0509	[6]	BOLT
0L-0364	[6]	LOCK
1P-7044 C	[1]	CAGE
1H-8261	[1]	RACE
8M-8110	[1]	SEAL
9M-3786 C	[1]	SEAL
1H-8466	[1]	GASKET
1B-8724	[2]	KEY
7B-3235	[8]	BOLT
3B-4508	[8]	LOCKWASHER
2M-2290	[1]	BRACKET
2H-4406	[4]	SPRING
2H-4438	[4]	STUD
4S-9074	[2]	DISC ASSEM.
4H-3988	[1]	PIN
		(PART OF PLATE ASSEM. 4H4021)
4H-4021	[1]	PLATE ASSEM.
1H-8396	[2]	BEARING
		(PART OF PLATE ASSEM. 4H4021)
2H-3526	[1]	RING
9F-7095	[2]	BLOCK
3B-4628	[2]	COTTER PIN
3K-7124	[3]	RETAINER ASSEM.
0S-1618	[3]	BOLT
5H-5652	[3]	LOCK
9M-5682	[1]	HUB (64 TEETH)
5B-3097	[4]	SPRING
3H-2646	[4]	PIN
1M-9177	[1]	PLATE (72 TEETH)
2H-4338	[1]	PLATE (72 TEETH)
1H-8262	[1]	SHAFT
1A-1135	[2]	BOLT
5M-7363	[1]	YOKE
C		INDICATES CHANGE

#HEBP10820179

7S-7602: OIL PUMP GROUP

OIL PUMP GROUP

7S7602 OIL PUMP GROUP
Part of 4K5034 Flywheel Clutch Group shown on Page 104

c211436 HEBP1082

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1H-3135	[1]	BUSHING
		(PART OF SUPPORT ASSEM.1H8178)
7S-7601	[1]	GEAR
		(DRIVE-10 TEETH)
4F-1113	[1]	BUSHING
		(PART OF BODY ASSEM.1H7480)
5H-2532	[1]	KEY
1H-8399	[1]	RING
1H-7480	[1]	BODY ASSEM.
2A-3630	[2]	PIN
		(PART OF BODY ASSEM.1H7480)
1H-7481	[1]	SHAFT (IDLER)
		(PART OF BODY ASSEM.1H7480)
3S-8800	[1]	GEAR
		(25 TEETH)
4F-2611	[1]	GEAR
		(IDLER-10 TEETH)
1B-9575 C	[6]	BOLT
9M-1974 C	[6]	WASHER
1H-8178	[1]	SUPPORT ASSEM.
C		INDICATES CHANGE

Information:

POWER TRAIN

TRANSMISSION GP

Service Magazine

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog D4D :

5K-5032 TRANSMISSION CASE AND COVERS GROUP

4K-5035 TRANSMISSION GROUP

4V-1603 WIRING HARNESS ASSEMBLY

5S-8500 GLOW PLUG GP

7H-7290 SWITCH AS-DISCONNECT

5S-8500 GLOW PLUG GP

6K-7839 LIGHTING GROUP

5K-8017 GEAR GP-LOW SPEED

4K-5029 GEAR SHIFT CONTROL GROUP

6K-4665 FINAL DRIVE GROUP

4K-5034 FLYWHEEL CLUTCH GROUP

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch