6A7358 ENGINE ARRANGEMENT--Part 1 of 2 3304 Engine Serial No. 48V12848-Up. NOTE: WHEN ORDERING PARTS GIVE ARRANGEMENT NUMBER AND SERIAL NUMBER D4D

Part No	Qty	Parts name
4N-4028 Y	[4]	CONNECTING ROD & PISTON GROUP
		- OR -
9S-8912 Y	[4]	CONNECTING ROD & PISTON GROUP
2P-6201 Y	[1]	CAMSHAFT GROUP
2P-6216 Y	[1]	CRANKSHAFT GROUP
		- OR -
2P-6218 Y	[1]	CRANKSHAFT GROUP
2P-6225 Y	[1]	CRANKSHAFT SEAL GROUP
6A-6610 Y	[1]	CYLINDER BLOCK COVER GROUP
6A-3834 Y	[1]	CYLINDER BLOCK GROUP
5S-6425 Y	[1]	BALANCER GROUP
1P-3840 Y	[1]	LIFTING EYE GROUP
2P-6274 Y	[1]	CYLINDER HEAD GROUP
2P-6514 Y	[1]	VALVE MECHANISM COVER GROUP
2P-6524 Y	[1]	VALVE MECHANISM GROUP
2P-6544 Y	[1]	CYLINDER HEAD FASTENER GROUP
4N-6508 Y	[1]	FRONT HOUSING COVER GROUP
2P-6246 Y	[1]	TRUNNION GROUP
2P-6498 Y	[1]	FRONT HOUSING FASTENER GROUP
2P-7753 Y	[1]	ENGINE SUPPORT GROUP
2P-7831 Y	[1]	FAN DRIVE GROUP
2P-8598 Y	[1]	CRANKSHAFT HUB GROUP
6A-6621 Y	[1]	PULLEY GROUP
		- OR -
2P-8603 Y	[1]	PULLEY GROUP
2P-9641 Y	[1]	FRONT HOUSING GROUP
2P-9642 Y	[1]	FRONT TIMING GEAR GROUP
2P-6813 Y	[1]	FLYWHEEL HOUSING GROUP
7S-7878 Y	[1]	FLYWHEEL GROUP
2P-6155 Y	[1]	OIL PAN GROUP
2P-6189 Y	[1]	OIL PAN FASTENER GROUP
Y		SEPARATE ILLUSTRATION

#HEBP10860002

6A-7358: ENGINE ARRANGEMENT

ENGINE ARRANGEMENT

6A7358 ENGINE ARRANGEMENT--Part 2 of 2
3304 Engine Serial No. 48V12848-Up. NOTE: WHEN ORDERING PARTS
GIVE ARRANGEMENT NUMBER AND SERIAL NUMBER

HEBP10860002 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-3325 Y	[1]	FUMES DISPOSAL GROUP
1P-4244 Y	[1]	BREATHER GROUP
2P-1784 Y	[1]	OIL PUMP GROUP
2P-6491 Y	[1]	OIL LEVEL GAUGE GROUP
2P-6513 Y	[1]	OIL LINES GROUP
		- OR -
2P-6512 Y	[1]	OIL LINES GROUP
2P-6525 Y	[1]	OIL FILTER GROUP
		- OR -
2P-6475 Y	[1]	OIL FILTER GROUP
2P-6855 Y	[1]	OIL FILLER GROUP
2P-0661 RY	[1]	WATER PUMP GROUP
2P-6188 Y	[1]	WATER LINES GROUP
2P-7740 Y	[1]	WATER LINES GROUP ELBOW
2P-7741 Y	[1]	WATER LINES GROUP PIPE
		- OR -
2P-6215 Y	[1]	ENGINE OIL COOLER GROUP
2P-8164 Y	[1]	REGULATOR AND HOUSING GROUP
4N-9585 Y	[1]	EXHAUST MANIFOLD FASTENER GROUP
2P-6570 Y	[1]	EXHAUST MANIFOLD GROUP
2P-6840 Y	[1]	AIR LINES GROUP
3P-0138 Y	[1]	EXHAUST PIPE GROUP
4N-3287 Y	[1]	FUEL PRIMING PUMP GROUP
4N-3303 Y	[1]	FUEL FILTER GROUP
4N-3374 Y	[1]	FUEL INJECTION VALVES AND LINES GROUP
4N-4510 Y	[1]	GOVERNOR COVER GROUP
6N-0274 Y	[1]	GOVERNOR AND FUEL INJECTION PUMP GROUP
5S-8500 Y	[1]	GLOW PLUG GROUP
R		REMFG PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#HEBP10860003

6A-3834: CYLINDER BLOCK GP

CYLINDER BLOCK GP

6A3834 CYLINDER BLOCK GROUP
6A6669 Block parts are shown on Page 7

c209517 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-9307	[1]	PLUG
	6F-7062	[1]	GASKET
2.	5M-6213	[2]	PLUG
3.	2P-8889	[4]	LINER
4.	5S-6670	[12]	SEAL
5.	5M-6214	[1]	PLUG
6.	6A-6669 Y	[1]	BLOCK ASSEM.
			(Separate Illustration)
7.	7H-3171	[1]	PLUG
8.	3J-5389 C	[1]	PLUG
9.	2B-0858 C	[1]	PLUG
10.	9L-5854 C	[4]	BAND
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#HEBP10860004

6A-6610: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

6A6610 CYLINDER BLOCK COVER GROUP

c216714 HEBP1086

6A6610 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0L-1351 C	[2]	BOLT
2.	8L-8662 C	[1]	COVER
	5S-8055	[1]	GASKET
3.	4B-4387	[1]	PLUG
4.		[2]	DOWEL
5.	8M-3267 C	[1]	SCREW
6.	1A-2029 C	[2]	BOLT
7.	5M-1903	[1]	COVER
	4M-2250	[1]	GASKET
8.	5M-2894 C	[4]	WASHER
	C		INDICATES CHANGE

#HEBP10860005

6A-6669: CYLINDER BLOCK AS

CYLINDER BLOCK AS

6A6669 CYLINDER BLOCK ASSEMBLY
Part of 6A3834 Cylinder Block Group
For Field Replacement order 6A6669 Block Assembly plus 1--2P8783 Hardware Kit

c143401 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-4046	[2]	BEARING
2.	8B-1312	[2]	DOWEL
3.	5B-7652	[2]	DOWEL
4.	4B-5387	[3]	PLUG
5.	5M-6213	[1]	PLUG
6.	8B-6349	[2]	DOWEL
7.	5S-8462	[1]	STUD
8.	9M-5477	[1]	BEARING
9.	1P-2717	[5]	CAP
10.	7S-3224	[10]	BOLT
11.	2S-5658	[10]	WASHER
12.	5S-6420	[2]	BEARING
13.	4B-9782	[5]	BALL
14.	5S-6419	[4]	BEARING
15.	2A-3798	[2]	DOWEL

#HEBP10860006

2P-6216: CRANKSHAFT GROUP

CRANKSHAFT GROUP

2P6216 CRANKSHAFT GROUP
Engine Serial No. 48V12848 to 48V28845 inclusive. Note: For Field Replacement of
2P6214 Crankshaft Assembly, order 4N7692 Crankshaft Assembly plus 1--5S6296,
1--9S3111 and 1--6N8853 Seals

c117586 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-0716	[2]	PLATE
2.	2P-6214	[1]	CRANKSHAFT ASSEM.
3.	9F-2247	[4]	PLUG
4.	3S-9730	[5]	BEARING

#HEBP10860007

4N-7692: CRANKSHAFT AS

CRANKSHAFT AS

4N7692 CRANKSHAFT ASSEMBLY--Field Installation

c155610 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-3858	[1]	SLEEVE
2.	9F-2247	[4]	PLUG
3.	4M-9933	[1]	GEAR (40 teeth)
4.	5H-2671	[1]	KEY
5.	2P-3859	[1]	SLEEVE

#HEBP10860008

2P-6218: CRANKSHAFT GP

CRANKSHAFT GP

2P6218 CRANKSHAFT GROUP
Engine Serial No. 48V28846-Up. Note: For Field Replacement of 4N7695 Crankshaft
Assembly order 4N7692 Crankshaft Assembly, shown on Page 8, plus 1--5S6296,
1--9S3111 and 1--6N8853 Seals

c211892 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-8940 C	[2]	PLATE
2.	4N-7695	[1]	CRANKSHAFT ASSEM.
3.	9F-2247	[4]	PLUG
4.	3S-9730	[5]	BEARING
	C		INDICATES CHANGE

#HEBP10860009

2P-6225: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

2P6225 CRANKSHAFT SEAL GROUP
Engine Serial No. 48V25558 to 48V26238 inclusive

c215171 HEBP1086

For full view, you need register

Parts for your D4D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-3038 C	[1]	SEAL
2.	2P-3858 C	[1]	SLEEVE
3.	2P-3859 C	[1]	SLEEVE
4.	5S-6296 C	[1]	SEAL
	C		INDICATES CHANGE

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Introduction
3304 VEHICULAR ENGINE

Engine Design
3304 VEHICULAR ENGINE

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

Systems Operation
3304 VEHICULAR ENGINE

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Testing and Adjusting

Testing And Adjusting
3304 VEHICULAR ENGINE

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Engine
D4 TRACTOR ENGINE

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Remanufactured Short Blocks Available For All 3304 Engines {1200}
1987/08/03

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/08/28

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D4D :

6A-7358 ENGINE ARRANGEMENT

6A-3834 CYLINDER BLOCK GP

6A-6610 COVER GP-CYLINDER BLOCK

6A-6669 CYLINDER BLOCK AS

2P-6216 CRANKSHAFT GROUP

4N-7692 CRANKSHAFT AS

2P-6218 CRANKSHAFT GP

2P-6225 SEAL GP-CRANKSHAFT

Truck sale:

14,000

Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT

CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $39,016

CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia

USD $18,900

CAT D4D

DRC Ranch