COOLING SYSTEM
PUMP GP-WATERLINES GP-WATER
POWER TRAIN
COOLER GPCOOLING SYSTEM
LINES GP-WATERCOOLER GP
POWER TRAIN
COOLER GPBASIC ENGINE
AIR COMPRESSOR GPAIR INLET AND EXHAUST SYSTEM
LINES GP-AIRBASIC ENGINE
AIR COMPRESSOR GPAIR INLET AND EXHAUST SYSTEM
LINES GP-AIRCOOLING SYSTEM
PUMP GP-WATER#HEBP11040120
7N-5908: PUMP GP-WATER
7N5908 WATER PUMP GROUP
Engine Serial No. 48V58120-Up
Engine Serial No. 48V58120-Up
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5F-3106 | [1] | SEAL-O-RING | |
2. | 0T-0055 | [2] | BOLT | |
5M-2894 | [2] | WASHER | ||
3. | 1W-3058 R | [1] | PUMP GP-WATER | |
1W-4619 | [1] | HOUSING-PUMP | ||
4. | 8N-5928 | [1] | GASKET | |
5. | 8S-8821 | [1] | SEAL-IMPELLER | |
6. | 6V-3988 | [1] | SEAL-LIP TYPE | |
7. | 1K-6985 J | [1] | RING-RETAINING | |
8. | 5P-0076 J | [1] | BOLT-12 POINT HEAD | |
9. | 6H-3957 J | [2] | BALL BEARING | |
10. | 7N-5899 J | [1] | SHAFT-WATER PUMP | |
11. | 5M-2894 J | [3] | WASHER | |
12. | 4L-6454 | [1] | BOLT | |
9M-6527 | [1] | WASHER-HARD | ||
13. | 5M-6213 | [1] | PLUG | |
14. | 7N-5186 | [1] | GEAR AS-PUMP | |
15. | 8S-7762 | [1] | RING-SEAL | |
16. | 8N-5929 | [1] | COVER-WATER PUMP | |
17. | 7N-5910 | [1] | IMPELLER-PUMP | |
18. | 0L-1351 | [2] | BOLT | |
19. | 6N-9312 | [1] | SEAL GP-PUMP | |
THE FOLLOWING REPAIR | ||||
KIT IS AVAILABLE: | ||||
1W-7052 | [1] | KIT-REBUILD | ||
(INCL PARTS MARKED J) | ||||
R | REMFG PART MAY BE AVAILABLE |
#HEBP11040121
2P-6188: LINES GP-WATER
2P6188 WATER LINES GROUP
Engine Serial No. 48V14467 to 48V35435 inclusive
Engine Serial No. 48V14467 to 48V35435 inclusive
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0T-0065 C | [1] | BOLT | |
2. | 2P-6132 | [1] | GASKET | |
3. | 5P-4868 C | [2] | CLAMP | |
4. | 2P-2511 | [1] | PIPE | |
5. | 0S-1588 C | [2] | BOLT | |
6. | 5P-1260 CE | HOSE 7.62 cm(3 in.) | ||
7. | 2P-6117 C | [1] | ELBOW | |
8. | 2P-0406 | [1] | GASKET | |
9. | 5M-6213 | [2] | PLUG | |
10. | 0S-1619 C | [1] | BOLT | |
11. | 1B-5174 | [3] | PLUG | |
12. | 0S-1590 C | [1] | BOLT | |
C | INDICATES CHANGE | |||
E | ORDER BY THE CENTIMETER |
#HEBP11040122
6K-5451: TORQUE CONVERTER COOLER LINES GROUP
6K5451 TORQUE CONVERTER COOLER LINES GROUP
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [3] | SEAL | ||
2. | [2] | BOLT | ||
3. | [8] | LOCKWASHER | ||
4. | [6] | BOLT | ||
5. | [1] | TUBE ASSEM. | ||
6. | [1] | SEAL | ||
7. | [1] | FLANGE | ||
8. | [1] | TUBE ASSEM. | ||
9. | [1] | PLUG | ||
[1] | SEAL |
#HEBP11040123
7N-7211: LINES GP-WATER
7N7211 WATER LINES GROUP
Engine Serial No. 48V35436-Up
Engine Serial No. 48V35436-Up
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0T-0065 | [1] | BOLT | |
2. | 2P-6132 | [1] | GASKET | |
3. | 5P-4868 | [2] | CLAMP | |
4. | 2P-2511 | [1] | PIPE | |
5. | 0S-1619 | [2] | BOLT | |
6. | 5P-1260 C | HOSE 7.62 cm(3 in.) | ||
7. | 7N-0172 | [1] | ELBOW | |
8. | 7N-0200 | [1] | GASKET | |
9. | 5M-6213 | [2] | PLUG | |
10. | 0S-1588 | [1] | BOLT | |
11. | 1B-5174 | [3] | PLUG | |
12. | 0S-1590 | [1] | BOLT | |
13. | 3J-5390 | [1] | PLUG | |
H | ORDER BY THE CENTIMETRE |
#HEBP11040124
2P-6215: COOLER GP-ENGINE OIL
2P6215 ENGINE OIL COOLER GROUP
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0L-2070 | [1] | BOLT | |
2. | 1A-2029 | [6] | BOLT | |
3. | 5S-6051 | [2] | GASKET | |
4. | 7N-0165 R | [1] | CORE AS-OIL COOLER | |
5. | 2P-3202 | [1] | BOLT-WASHER HEAD 2.85CM(1.125IN)LG | |
-OR- | ||||
1T-0765 | [1] | BOLT 2.54CM(1IN)LG | ||
6. | 0L-1143 B | [1] | BOLT | |
7. | 0S-1591 C | [1] | BOLT | |
5M-2894 C | [1] | WASHER | ||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMFG PART MAY BE AVAILABLE |
#HEBP11040125
2P-6508: COOLER GP-TRANSMISSION OIL
2P6508 TRANSMISSION OIL COOLER GROUP
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3B-0551 | [1] | PLUG | |
2. | 0L-1352 C | [1] | BOLT | |
3. | 6N-0125 C | [1] | BONNET | |
4. | 3J-5390 | [1] | PLUG | |
5. | 7N-0128 RC | [1] | CORE ASSEM. | |
6. | 2M-4108 | [2] | GASKET | |
7. | 2H-8829 | [1] | PLUG | |
6F-7062 | [1] | GASKET | ||
8. | 0S-1617 C | [2] | BOLT | |
9M-1974 C | [2] | WASHER | ||
9. | 5S-7607 C | [1] | BONNET | |
10. | 0S-1594 C | [8] | BOLT | |
11. | 0S-1591 C | [1] | BOLT | |
12. | 1B-5174 | [1] | PLUG | |
13. | 2P-2516 | [1] | GASKET | |
14. | 4N-3840 C | [1] | COVER | |
4N-3841 C | [1] | GASKET | ||
C | INDICATES CHANGE | |||
R | REMFG PART MAY BE AVAILABLE |
#HEBP11040126
2P-8710: AIR COMPRESSOR GP
2P8710 AIR COMPRESSOR GROUP
Engine Serial No. 48V14467 to 48V35435 inclusive
2P8711 Air Compressor parts are shown on Page 44B
Engine Serial No. 48V14467 to 48V35435 inclusive
2P8711 Air Compressor parts are shown on Page 44B
#HEBP11040127
2P-6843: LINES GP-AIR
2P6843 AIR LINES GROUP
Engine Serial No. 48V14467 to 48V35673 inclusive
Engine Serial No. 48V14467 to 48V35673 inclusive
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2S-5301 C | [1] | RING (large) | |
2. | 1P-1087 C | [1] | ELBOW | |
3. | 1P-1195 | [1] | HOSE | |
4. | 5P-0597 C | [2] | CLAMP | |
5. | 1P-0677 | [1] | ELBOW | |
6. | C | [8] | BOLT | |
7. | 5S-6735 | [2] | GASKET | |
8. | 1P-0699 | [1] | PIPE | |
9. | 0S-1590 C | [3] | BOLT | |
10. | 1B-5355 | [3] | NUT | |
11. | 6N-1491 C | [1] | COUPLING | |
6N-0009 C | [1] | RING (small) | ||
12. | 0S-0509 C | [1] | BOLT | |
5M-2894 C | [1] | WASHER | ||
13. | 4H-8878 C | [1] | CLIP | |
14. | 6N-7671 C | [1] | TUBE ASSEM. | |
15. | 5K-9243 C | [2] | ELBOW | |
C | INDICATES CHANGE |
#HEBP11040128
7N-7770: AIR COMPRESSOR GP
7N7770 AIR COMPRESSOR GROUP
Engine Serial No. 48V35436-Up
7N7764 Air Compressor parts are shown on Page 45
Engine Serial No. 48V35436-Up
7N7764 Air Compressor parts are shown on Page 45
#HEBP11040129
2P-6843: LINES GP-AIR
2P6843 AIR LINES GROUP
Engine Serial No. 48V35674 to 48V38562 inclusive
Engine Serial No. 48V35674 to 48V38562 inclusive
Parts for your 950 WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2S-5301 | [1] | RING (large) | |
2. | 1P-1087 | [1] | ELBOW | |
3. | 1P-1195 | [1] | HOSE | |
4. | 5P-0597 | [2] | CLAMP | |
5. | 1P-0677 | [1] | ELBOW | |
6. | 1A-2029 | [8] | BOLT | |
7. | 5S-6735 | [2] | GASKET | |
8. | 1P-0699 | [1] | PIPE | |
9. | 0S-1590 | [3] | BOLT | |
10. | 1B-5355 | [3] | NUT | |
11. | 6N-1491 | [1] | COUPLING | |
6N-0009 | [1] | RING (small) | ||
12. | 0S-0509 | [1] | BOLT | |
5M-2894 | [1] | WASHER | ||
13. | 6K-8178 C | [1] | CLIP | |
14. | 6K-6829 C | [1] | HOSE ASSEM. 96.5 cm(38 in.) | |
15. | 3B-6552 C | [1] | ELBOW | |
16. | 8H-7696 C | [1] | ELBOW | |
C | INDICATES CHANGE |
Information:
COOLING SYSTEM
PUMP GP-WATER
Special Instruction
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Technical Information Bulletin
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Specifications
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Reuse And Salvage Guidelines
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Disassembly and Assembly
Service Magazine