AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4 Engine Serial No. 48V14467 to 48V18620 inclusive Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67 950


FUEL SYSTEM
GOVERNOR GP

WHEEL LOADER 950 WHEEL LOADER 43J
 950 WHEEL LOADER 43J06268-UP (MACHINE) POWERED BY 3304 ENGINE HEBP1104 950 43J   (1968)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
6N-0247 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
 

#HEBP11040160
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Engine Serial No. 48V14467 to 48V18620 inclusive
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c223907 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0608 [1] BODY  
  4N-0403 [1] GASKET  
2. 2A-5546 [2] BOLT  
  7M-3510 [2] WASHER  
3. 4N-2717 [1] COVER  
4. 6N-1346 C [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 C [1] PIN (spring)  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 6N-5325 C [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 6N-1078 C [1] BEARING  
10. 8N-0628 C [1] BEARING  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-0009 [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [1] BOLT  
  2S-4652 [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 0S-1616 [2] BOLT 2.54 cm(1 in.) long  
  1B-2714 [1] BOLT 6.35 cm(2.5 in.) long  
  2A-4781 [1] BOLT 6.98 cm(2.75 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.5 in.) long  
20. 4N-6430 C [1] PIN  
21. 9S-8632 [1] SPRING  
22. 4N-0116 [1] GUIDE  
  C   INDICATES CHANGE
 

#HEBP11040161
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Engine Serial No. 48V14467 to 48V18620 inclusive. Part of 6N247 and 6N2477 Governor
and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c215104 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 C [4] BUSHING  
3. 9B-1320 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 4N-1765 [4] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 4N-1750 [4] LIFTER  
  4N-2685 C [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 1B-2713 C [1] BOLT  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
18. 4N-1594 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.53mm(.06in.)thick  
  8F-1326 [1] WASHER .82mm(.032in.)thick  
19. 2P-3200 [1] BOLT  
  1J-9671 C [1] SEAL  
20. 2M-5471 [1] BOLT  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0445 [1] LEVER  
  C   INDICATES CHANGE
 

#HEBP11040162
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Engine Serial No. 48V14467 to 48V18620 inclusive
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c154512 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 4N-0610 [1] DIAPHRAGM  
5. 4N-0611 [1] PLUNGER  
6. 3S-4818 [1] SPRING  
7. 4N-0613 [2] PLATE  
8. 4N-0605 [1] SPRING  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 [1] SEAL  
11. 4N-1767 [1] VALVE  
12. 0S-1616 [4] BOLT  
13. 4N-0402 [1] GASKET  
14. 9S-8601 [1] PIN  
 

#HEBP11040163
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Engine Serial No. 48V18621 to 48V41893 inclusive
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c182798 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 C [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] PIN (spring)  
3. 8S-6814 [2] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 C [1] SEAL  
8. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 6N-6567 C [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 C [1] SHAFT  
19. 4N-9019 C [1] DOWEL  
20. 4N-0927 [1] SHAFT ASSEM.  
21. 5M-6509 C [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 C [1] BODY ASSEM.  
    (Includes)
  4N-5050 [1] PLUG  
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-0507 [1] SHAFT ASSEM.  
29. 4N-3779 [1] KEY  
30. 4N-0429 [1] GEAR (15 teeth)  
31. 4N-0527 [1] SPRING  
32. 4N-0435 [1] SEAT  
33. 6N-7451 C [1] SEAT  
34. 6N-2957 C [2] WASHER  
  6N-2956 C [1] WASHER (spring)  
35. 4N-1723 [1] SHIELD  
  C   INDICATES CHANGE
 

#HEBP11040164
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Engine Serial No. 48V18621 to 48V41893 inclusive
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c223908 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 3B-8695 [1] BOLT- 8.89 cm(3.5 in.) long  
  2A-4781 [1] BOLT-6.98 cm(2.75 in.) long  
3. 1P-9925 C [2] BOLT- 6.35 cm(2.5 in.) long  
4. 6N-1346 C [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 [1] PIN (spring)  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 6N-5325 C [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 4N-5481 C [1] STUD  
10. 6N-1078 C [1] BEARING  
11. 8N-0628 C [1] BEARING  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 9S-8632 [1] SPRING  
20. 4N-0116 [1] GUIDE  
21. 5J-5314 [4] BOLT  
  C   INDICATES CHANGE
 

#HEBP11040165
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Engine Serial No. 48V18621 to 48V41893 inclusive. Part of 6N247 and 6N2477
Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c216618 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 C [4] BUSHING  
3. 9B-1320 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 6N-7527 C [4] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 4N-1750 [4] LIFTER  
  4N-2685 C [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 2M-5471 [2] BOLT  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
18. 4N-1594 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER -1.53 mm(.06 in.) thick  
  8F-1326 [1] WASHER- .82 mm(.032 in.) thick  
19. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
20. 4N-0445 [1] LEVER  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0223 C [4] SEAL  
  C   INDICATES CHANGES
 

#HEBP11040166
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Engine Serial No. 48V18621 to 48V41893 inclusive
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c209401 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 0S-1616 [4] BOLT  
5. 4N-0402 [1] GASKET  
6. 9S-8601 [1] PIN  
7. 6N-5482 C [2] PLATE  
8. 4N-0605 [1] SPRING  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 [1] SEAL  
11. 4N-1767 [1] VALVE  
  C   INDICATES CHANGE
 

#HEBP11040167
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Engine Serial No. 48V41894-Up
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c182551 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] PIN (spring)  
3. 8S-6814 [2] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 6N-6567 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 7M-7219 C [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0927 [1] SHAFT ASSEM.  
21. 5M-6509 C [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 [1] BODY ASSEM.  
    (Includes)
  4N-5050 [1] PLUG  
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-0507 [1] SHAFT ASSEM.  
29. 4N-3779 [1] KEY  
30. 4N-0429 [1] GEAR (15 teeth)  
31. 4N-0527 [1] SPRING  
32. 4N-0435 [1] SEAT  
33. 6N-7451 [1] SEAT  
34. 6N-2957 [2] WASHER  
  6N-2956 [1] WASHER (spring)  
35. 4N-1723 [1] SHIELD  
  C   INDICATES CHANGE
 

#HEBP11040168
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Engine Serial No. 48V41894-Up
Part of 6N247 and 6N2477 Governor and Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c182552 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5314 [4] BOLT  
2. 3B-8695 [1] BOLT 8.89 cm(3.5 in.) long  
  2A-4781 [1] BOLT 6.98 cm(2.75 in.) long  
3. 1P-9925 [2] BOLT 6.35 cm(2.5 in.) long  
4. 8N-1569 C [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 [1] PIN (spring)  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 8N-0984 [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 4N-5481 [1] STUD  
10. 6N-1078 [1] BEARING  
11. 8N-0628 [1] BEARING  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 [1] COVER  
  4N-0049 [1] GASKET  
17. 6N-7523 C [2] WASHER  
18. 4N-0594 [1] GASKET  
19. 9S-8632 [1] SPRING  
20. 4N-0116 [1] GUIDE  
  C   INDICATES CHANGE
 

#HEBP11040169
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Engine Serial No. 48V41894-Up. Part of 6N247 and 6N2477 Governor and
Fuel Injection Pump Groups shown on Pages 56, 57 and 67
c182553 HEBP1104
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 [4] BUSHING  
3. 9B-1320 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 6N-7527 [4] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 8N-1317 C [4] LIFTER  
  4N-2685 [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 2M-5471 [2] BOLT  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
18. 4N-1594 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.53 mm(.06 in.) thick  
  8F-1326 [1] WASHER .82 mm(.032 in.) thick  
19. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
20. 4N-0445 [1] LEVER  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 6F-6672 C [4] SEAL  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Check Valve And Bypass Valve
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pumps
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor Control Pedal
950 & 966C WHEEL LOADERS OPERATOR'S STATION
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 950 :

GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0247 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0247 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOVERNOR CONTROL GROUP
5V-2899 GOVERNOR CONTROL GROUP
GOVERNOR CONTROL GROUP
6K-3790 GOVERNOR CONTROL GROUP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.