4V8149 HARNESS ASSEMBLY Serial No. 43J12169-Up. Part of 4V8148 Wiring Group shown on Page 98B AN ATTACHMENT 950

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 4V-8149 HARNESS AS
1. 5V-3458 HARNESS AS

POWER TRAIN

TORQUE CONVERTER GP

2. 5S-4370 TORQUE CON
3. 1T-0725 TORQUE CON

TRANSMISSION GP

4. 1P-5265 POWER SHIF
5. 1P-5265 POWER SHIF
6. 1P-5265 POWER SHIF
7. 1P-5265 POWER SHIF
8. 1P-5265 POWER SHIF
9. 1P-5265 POWER SHIF
0. INFORMATION

WHEEL LOADER 950 WHEEL LOADER 43J
950 WHEEL LOADER 43J06268-UP (MACHINE) POWERED BY 3304 ENGINE HEBP1104 950 43J (1968)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

5C-7740 HARNESS ASSEMBLY

5C-7741 HARNESS ASSEMBLY

4V-8149 HARNESS AS

5V-3458 HARNESS AS-WIRING

5C-8130 HARNESS AS

1V-4677 AIR CONDITIONER WIRING GROUP

#HEBP11040360

4V-8149: HARNESS AS

HARNESS AS

4V8149 HARNESS ASSEMBLY
Serial No. 43J12169-Up. Part of 4V8148 Wiring Group shown on Page 98B
AN ATTACHMENT

c228289 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1475	[2]	TERMINAL
2.	2L-8075	[1]	TERMINAL
3.	5P-1477	[1]	TERMINAL
4.	2L-8077	[1]	TERMINAL
5.	5P-4571	[2]	TERMINAL
			THE FOLLOWING WIRE IS AVAILABLE:
	5P-5623 H		WIRE (16 gauge)
	H		ORDER BY THE METER

#HEBP11040361

5V-3458: HARNESS AS-WIRING

HARNESS AS-WIRING

5V3458 HARNESS ASSEMBLY
Serial No. 43J12169-Up. Part of 5V3457 Wiring Group shown on Page 98A-2
AN ATTACHMENT

c227505 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-1476	[1]	TERMINAL
2.	2S-5011	[1]	BODY
	2S-5012	[1]	CAP
	3K-8782	[1]	FUSE (10 amp)
	2S-5013	[1]	SPRING
	2S-5014	[2]	CONTACT
3.	5P-1475	[2]	TERMINAL
4.	2L-8077	[1]	TERMINAL
5.	2L-8079	[2]	TERMINAL
	6N-9587 J	[1]	CONNECTOR
	6K-1827 J	[1]	CONNECTOR
			THE FOLLOWING WIRE IS AVAILABLE:
	5P-5623 H		WIRE (16 gauge)
	H		ORDER BY THE METER
	J		NOT SHOWN

#HEBP11040362

5S-4370: TORQUE CONVERTER GROUP

TORQUE CONVERTER GROUP

5S4370 TORQUE CONVERTER GROUP
Part of 1P5265 Power Shift Transmission Arrangement shown on Pages 102, 104 & 104B
1T725 Torque Converter parts are shown on Page 101

c222106 HEBP1104

5S4370 TORQUE CONVERTER GROUP Parts scheme

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-8580	[1]	SHAFT
2.	2P-1995 C	[1]	COVER ASSEM.
	1H-9720	[1]	PLUG
3.	9S-8008 C	[2]	PLUG
	3D-2824	[2]	SEAL
4.	2A-4639	[5]	BOLT
5.	5M-2894	[12]	WASHER
6.	3K-0526	[1]	BEARING
7.	0S-1594	[6]	BOLT
8.	3B-4506	[20]	LOCKWASHER
9.	3K-0556	[1]	RETAINER
10.	1S-3716	[1]	COVER
11.	2S-0622	[1]	GEAR (46 teeth)
12.	1S-3715	[1]	GASKET
13.	5M-6200	[1]	SEAL
14.	0S-1588	[4]	BOLT
15.	1T-0725 Y	[1]	CONVERTER ASSEM.
			(Separate Illustration)
16.	1C-2251	[7]	BOLT
17.	1F-2771	[1]	BEARING
18.	5S-6980	[1]	RING
19.	0L-2070	[14]	BOLT
20.	7F-6894	[2]	LOCK
21.	2K-5967	[1]	RING
22.	2H-3088	[1]	SEAL
23.	5M-2461	[1]	SPACER
24.	5S-7887	[1]	GEAR (50 teeth)
25.	5S-7888	[1]	RETAINER
26.	5S-7886	[1]	GEAR (50 teeth)
27.	7G-5220 C	[1]	RETAINER
28.	0S-1584	[1]	BOLT
29.	7S-4571	[1]	SEAL
30.	5H-6199	[1]	RING
31.	8M-4988	[1]	SEAL
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#HEBP11040363

1T-0725: TORQUE CONVERTER GP

TORQUE CONVERTER GP

1T725 TORQUE CONVERTER GROUP
Part of 5S4370 Torque Converter Group shown on Page 100

c165720 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1T-0020	[1]	WHEEL (TURBINE)
1T-0292	[1]	WHEEL ASSEM. (GUIDE)
7B-3028	[2]	SCREW
1T-0094 C	[1]	PLATE (name)
0T-0102	[6]	BOLT
1T-0542	[1]	BEARING
7M-5130	[1]	PIN
1T-0541	[1]	PILOT
0S-1584	[1]	BOLT
1T-0537	[1]	RETAINER
1T-0289	[4]	PIN (312" DIAMETER)
	[4]	PIN (188" DIAMETER)
1T-0294	[1]	RING
1T-0024	[1]	HOUSING
2B-2695	[24]	BOLT
1T-0738	[24]	WASHER
1T-0032	[2]	PLATE
1A-2343	[8]	BOLT
1T-0555	[1]	CARRIER
1T-1313 C	[1]	RING
1T-0205	[1]	RING
1T-1314 C	[1]	SHAFT (output)
1T-0210	[1]	BEARING
1T-0013	[1]	RING
1T-0015	[1]	SLEEVE
1T-0623	[1]	GEAR ASSEM. (43 TEETH)
1T-0576	[1]	BEARING
		(PART OF GEAR ASSEM. 1T623)
1T-0290	[2]	PLATE
1T-0414	[6]	BOLT
1T-0022	[1]	WHEEL (IMPELLER)
C		INDICATES CHANGE

#HEBP11040364

1P-5265: POWER SHIFT TRANSMISSION ARRANGEMENT

POWER SHIFT TRANSMISSION ARRANGEMENT

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 1
Serial No. 43J6268 to 43J7254 inclusive. 5S4370 Torque Converter and 2S6457
Transmission Filter parts are shown on Pages 100 and 111

c159799 HEBP1104

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT Parts scheme

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4205	[4]	NUT
2.	3B-4508	[11]	LOCKWASHER
3.	8M-4443	[2]	SEAL
4.	2S-6457 Y	[1]	FILTER GROUP
			(Separate Illustration)
5.	5S-4355	[1]	MANIFOLD ASSEM.
6.	4H-9304	[4]	STUD
7.	7B-3235	[3]	BOLT
8.	8M-5254	[1]	SEAL
9.	8M-5248	[1]	SEAL
10.	8M-5010	[3]	SEAL
11.	0S-1588	[2]	BOLT
12.	3B-4506	[6]	LOCKWASHER
13.	4B-4278	[2]	WASHER
14.	5H-3252	[1]	SEAL
15.	8M-5661	[1]	SEAL
16.	1D-4717	[2]	NUT
17.	2B-2006	[4]	BOLT
18.	8M-4992	[1]	SEAL
19.	5M-7927	[1]	ADAPTER ASSEM.
20.		[1]	DOWEL
21.	3F-0957	[1]	DOWEL
22.	8S-6379	[1]	TUBE ASSEM.
23.	0S-1571	[2]	BOLT
24.	5S-4370 YC	[1]	TORQUE CONVERTER
			(Separate Illustration)
25.	8M-4432	[2]	SEAL
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#HEBP11040365

1P-5265: POWER SHIFT TRANSMISSION ARRANGEMENT

POWER SHIFT TRANSMISSION ARRANGEMENT

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 2
Serial No. 43J6268 to 43J7254 inclusive. 1P5257 Transmission, 7S4629 Transmission
Pump and 7S8550 Magnetic Screen parts are shown on Pages 106 and 118

c158736 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-8550 YC	[1]	MAGNETIC SCREEN
			(Separate Illustration)
2.	7S-4629 Y	[1]	PUMP GROUP
			(Separate Illustration)
3.	1P-5257 YC	[1]	TRANSMISSION
			(Separate Illustration)
4.	0S-1587 H	[2]	BOLT
5.	3B-4508 H	[2]	LOCKWASHER
6.	6K-2857 H	[1]	TUBE ASSEM.
7.	5M-8429 H	[1]	CLIP
8.	6K-2362 H	[1]	PLUNGER ASSEM.
9.	5K-0376 H	[2]	CLAMP
10.	5K-1568 H	[1]	CAP
11.	7B-6368 H	[1]	BALL
12.	6H-5139 H	[1]	PLATE
13.	6F-5188 H	[1]	GASKET
14.	0L-1351 H	[2]	BOLT
15.	1D-4717 H	[2]	NUT
16.	3B-4506 H	[16]	LOCKWASHER
17.	6K-2350 H	[1]	TUBE ASSEM.
18.	1H-9696 H	[1]	SEAL
19.	0S-1591 H	[2]	BOLT
20.	4K-5537 H	[1]	GASKET
21.	0L-1178 H	[8]	BOLT
22.	3B-4512 H	[8]	LOCKWASHER
23.	1V-3995 C	[2]	PIN
24.	1A-2029 C	[12]	BOLT
25.	5H-3252	[1]	SEAL 5.73 in. (14.55cm(inside dia.
26.	8M-5249	[2]	SEAL 1.35 in. (3.45 cm)inside dia.
27.	4N-5681 CH	[2]	BUSHING ASSEM.
28.	1V-2936 CH	[2]	SUPPORT ASSEM.
			(Each Includes)
29.	1D-4614	[2]	BOLT
	1B-4331	[2]	NUT
	3B-4512	[2]	LOCKWASHER
	2B-7557 CHL	[2]	CORK
	7S-4649 L	[1]	COVERS GROUP
			(Includes Covers, Gasket and Hardware)
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION
	L		NOT SHOWN
	H		NOT PART OF 1P5265 POWER SHIFT

#HEBP11040366

1P-5265: POWER SHIFT TRANSMISSION ARRANGEMENT

POWER SHIFT TRANSMISSION ARRANGEMENT

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 1
Serial No. 43J7255 to 43J8714 inclusive. 5S4370 Torque Converter and 2S6457
Transmission Filter parts are shown on Pages 100 and 111

c210460 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4205	[4]	NUT
2.	3B-4508	[11]	LOCKWASHER
3.	8M-4443	[2]	SEAL
4.	2S-6457 Y	[1]	FILTER GROUP
			(Separate Illustration)
5.	5S-4355	[1]	MANIFOLD ASSEM.
6.	4H-9304	[4]	STUD
7.	7B-3235	[3]	BOLT
8.	8M-5254	[1]	SEAL
9.	8M-5248	[1]	SEAL
10.	8M-5010	[3]	SEAL
11.	0S-1588	[2]	BOLT
12.	3B-4506	[6]	LOCKWASHER
13.	4B-4278	[2]	WASHER
14.	5H-3252	[1]	SEAL
15.	8M-5661	[1]	SEAL
16.	1D-4717	[2]	NUT
17.	2B-2006	[4]	BOLT
18.	8M-4992	[1]	SEAL
19.	5M-7927	[1]	ADAPTER ASSEM.
20.		[1]	DOWEL
21.	3F-0957	[1]	DOWEL
22.	8S-6379	[1]	TUBE ASSEM.
23.	0S-1571	[2]	BOLT
24.	5S-4370 Y	[1]	TORQUE CONVERTER
			(Separate Illustration)
25.	8M-4432	[2]	SEAL
	Y		SEPARATE ILLUSTRATION

#HEBP11040367

1P-5265: POWER SHIFT TRANSMISSION ARRANGEMENT

POWER SHIFT TRANSMISSION ARRANGEMENT

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 2
Serial No. 43J7255 to 43J8714 inclusive. 1P5257 Transmission, 7S4629 Transmission
Pump and 7S8550 Magnetic Screen parts are shown on Pages 106 and 118

c210461 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-8550 Y	[1]	MAGNETIC SCREEN
2.	7S-4629 Y	[1]	PUMP GROUP
3.	1P-5257 Y	[1]	TRANSMISSION
			(Separate Illustration)
4.	0S-1587 H	[2]	BOLT
5.	3B-4508 H	[2]	LOCKWASHER
6.	6K-2857 H	[1]	TUBE ASSEM.
7.	5M-8429 H	[1]	CLIP
8.	6K-2362 H	[1]	PLUNGER ASSEM.
9.	5K-0376 H	[2]	CLAMP
10.	5K-1568 H	[1]	CAP
	7B-6368 H	[1]	BALL
	6H-5139 H	[1]	PLATE
	6F-5188 H	[1]	GASKET
11.	0L-1351 CH	[1]	BOLT 2.22 cm(.875 in.) long
	1D-4717 CH	[1]	NUT
	0S-1588 CH	[1]	BOLT 3.18 cm(1.25 in.) long
12.	2V-7302 CH	[1]	TUBE ASSEM.
13.	5P-0597 CH	[2]	CLAMP
14.	8M-5299 CH	[1]	HOSE
15.	2V-7303 CH	[1]	TUBE ASSEM.
16.	3B-4506 CH	[16]	LOCKWASHER
17.	4N-5681 H	[2]	BUSHING ASSEM.
18.	1H-9696 H	[1]	SEAL
19.	0S-1591 H	[2]	BOLT
20.	4K-5537 H	[1]	GASKET
21.	0L-1178 H	[8]	BOLT
22.	3B-4512 H	[8]	LOCKWASHER
23.	1V-3995 H	[2]	PIN
24.	1A-2029 H	[12]	BOLT
25.	5H-3252	[1]	SEAL 14.55 cm(5.73 in.) I.D.
26.	8M-5249	[2]	SEAL 3.45 cm(1.35 in.) I.D.
27.	1V-2936 H	[2]	SUPPORT ASSEM.
			(Each Includes)
28.	1D-4614	[2]	BOLT
	1B-4331	[2]	NUT
	3B-4512	[2]	LOCKWASHER
	2B-7557 L	[2]	CORK
	7S-4649 L	[1]	COVERS GROUP
			(Includes Covers, Gasket and Hardware)
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION
	L		NOT SHOWN
	H		NOT PART OF 1P5265 POWER SHIFT

#HEBP11040368

1P-5265: POWER SHIFT TRANSMISSION ARRANGEMENT

POWER SHIFT TRANSMISSION ARRANGEMENT

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 1
Serial No. 43J8715 to 43J10870 inclusive. 5S4370 Torque Converter and 2S6457
Transmission Filter parts are shown on Pages 100 and 111

c222107 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4205	[4]	NUT
2.	3B-4508	[11]	LOCKWASHER
3.	8M-4443	[2]	SEAL
4.	2S-6457 Y	[1]	FILTER GROUP
			(Separate Illustration)
5.	5S-4355	[1]	MANIFOLD ASSEM.
6.	4H-9304	[4]	STUD
7.	7B-3235	[3]	BOLT
8.	8M-5254	[1]	SEAL
9.	8M-5248	[1]	SEAL
10.	8M-5010 C	[1]	SEAL
11.	0S-1588	[2]	BOLT
12.	3B-4506 C	[2]	LOCKWASHER
13.	4B-4278	[2]	WASHER
14.	5H-3252	[1]	SEAL
15.	8M-5661	[1]	SEAL
16.	1D-4717	[2]	NUT
17.	2B-2006	[4]	BOLT
18.	8M-4992	[1]	SEAL
19.	5M-7927	[1]	ADAPTER ASSEM.
20.		[1]	DOWEL
21.	3F-0957	[1]	DOWEL
22.	8S-6379	[1]	TUBE ASSEM.
23.	0S-1571	[2]	BOLT
24.	5S-4370 Y	[1]	TORQUE CONVERTER
			(Separate Illustration)
25.	8M-4432	[2]	SEAL
26.	5P-7084 C	[2]	SEAL
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#HEBP11040369

1P-5265: POWER SHIFT TRANSMISSION ARRANGEMENT

POWER SHIFT TRANSMISSION ARRANGEMENT

1P5265 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 2
Serial No. 43J8715 to 43J10870 inclusive. 1P5257 Transmission, 7S4629
Transmission Pump and 7S8550 Magnetic Screen parts are shown on Pages 106 & 118

c167771 HEBP1104

For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7S-8550 Y	[1]	MAGNETIC SCREEN
2.	7S-4629 Y	[1]	PUMP GROUP
3.	1P-5257 Y	[1]	TRANSMISSION
			(Separate Illustration)
4.	0S-1587 H	[2]	BOLT
5.	3B-4508 H	[2]	LOCKWASHER
6.	6K-2857 H	[1]	TUBE ASSEM.
7.	3Y-4099 CH	[1]	CLIP
8.	6K-2362 H	[1]	PLUNGER ASSEM.
9.	5K-0376 H	[2]	CLAMP
10.	5K-1568 H	[1]	CAP
	7B-6368 H	[1]	BALL
	6H-5139 H	[1]	PLATE
	6F-5188 H	[1]	GASKET
11.	0L-1351 H	[1]	BOLT 2.22 cm(.875 in.) long
	1D-4717 H	[1]	NUT
	0S-1588 H	[1]	BOLT 3.18 cm(1.25 in.) long
12.	2V-7302 H	[1]	TUBE ASSEM.
13.	5P-0597 H	[2]	CLAMP
14.	8M-5299 H	[1]	HOSE
15.	2V-7303 H	[1]	TUBE ASSEM.
16.	3B-4506 H	[16]	LOCKWASHER
17.	1A-2029 H	[12]	BOLT
18.	1H-9696 H	[1]	SEAL
19.	0S-1591 H	[2]	BOLT
20.	H	[1]	GASKET
21.	0L-1178 H	[8]	BOLT
22.	3B-4512 H	[8]	LOCKWASHER
23.	5H-3252	[1]	SEAL 14.55 cm(5.73 in.) I.D.
24.	8M-5249	[2]	SEAL 3.45 cm(1.35 in.) I.D.
25.	3V-5763 CH	[1]	SUPPORT ASSEM.
			(Includes)
26.	1V-3995	[1]	PIN
27.	7N-1164	[1]	MOUNT ASSEM.
28.	3V-5762	[1]	SUPPORT ASSEM.
	2B-7557 L	[2]	CORK
	7S-4649 L	[1]	COVERS GROUP
			(Includes covers, gasket and hardware)
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION
	L		NOT SHOWN
	H		NOT PART OF 1P5265 POWER SHIFT

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

Specifications

Glow Plug Positioning
3304 VEHICULAR ENGINE

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Asia

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Testing and Adjusting

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Disassembly and Assembly

Batteries And Battery Box
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER

Service Magazine

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Wiring Harness Conduit Component Sizes {1408}
1995/02/13

Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 950 :

5C-7741 HARNESS ASSEMBLY

5C-7740 HARNESS ASSEMBLY

4V-8148 WIRING GP

5V-3457 WIRING GP

5V-3400 SPEEDOMETER GP

5V-3245 BASIC ROADING ARRANGEMENT

5V-3458 HARNESS AS-WIRING

5S-4370 TORQUE CONVERTER GROUP

1T-0725 TORQUE CONVERTER GP

1P-5265 POWER SHIFT TRANSMISSION ARRANGEMENT

Truck sale:

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT

385,000

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY

454,718

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY

167,802

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.

166,716

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.