AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U630 TOOTH GROUP--Short Tip FOR USE WITH GENERAL PURPOSE AND MULTI-PURPOSE BUCKETS 9J3175 Tip parts are shown on Page 258A. AN ATTACHMENT 950


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)

WHEEL LOADER 950 WHEEL LOADER 43J
 950 WHEEL LOADER 43J06268-UP (MACHINE) POWERED BY 3304 ENGINE HEBP1104 950 43J   (1968)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
TOOTH GROUP
8J-6589 TOOTH GROUP
TOOTH GROUP
8J-6588 TOOTH GROUP
TOOTH GP-SHORT
1U-0630 TOOTH GP-SHORT
TIP GP-SHORT
9J-3175 TIP GP-SHORT
TOOTH GP-LONG
1U-0629 TOOTH GP-LONG
TOOTH GP-UNI
1U-2425 TOOTH GP-UNI
 

#HEBP11040800
 

1U-0630: TOOTH GP-SHORT

1U630 TOOTH GROUP--Short Tip
FOR USE WITH GENERAL PURPOSE AND MULTI-PURPOSE BUCKETS
9J3175 Tip parts are shown on Page 258A. AN ATTACHMENT
c179156 HEBP1104
1U0630 TOOTH GP-SHORT Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8823 [2] BOLT  
2. 5P-8362 [2] NUT  
3. 3G-4309 [1] ADAPTER (R.H.)  
  3G-4308 [1] ADAPTER (L.H.)  
4. 9J-3175 YC [8] TIP GROUP  
    (Separate Illustration)
5. 1U-0307 [6] ADAPTER  
6. 8J-2928 [12] BOLT  
7. 8J-2933 [12] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP11040801
 

9J-3175: TIP GP-SHORT

9J3175 TIP GROUP--Short
Part of 1U630 Tooth Group shown on Page 258A
AN ATTACHMENT
c229057 HEBP1104
9J3175 TIP GP-SHORT Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2308 [1] PIN-G.E.T.  
2. 3G-9609 C [1] RETAINER-G.E.T.  
3. 1U-3301 C [1] TIP-SHORT  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP11040802
 

1U-0629: TOOTH GP-LONG

1U629 TOOTH GROUP--Long Tip
FOR USE WITH GENERAL PURPOSE AND MULTI-PURPOSE BUCKETS
9J3167 Tip parts are shown on Page 259. AN ATTACHMENT
c178470 HEBP1104
1U0629 TOOTH GP-LONG Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8823 [2] BOLT  
2. 5P-8362 [2] NUT  
3. 3G-4309 [1] ADAPTER (R.H.)  
  3G-4308 [1] ADAPTER (L.H.)  
4. 9J-3167 Y [8] TIP GROUP  
    (Separate Illustration)
5. 1U-0307 [6] ADAPTER  
6. 8J-2928 [12] BOLT  
7. 8J-2933 [12] NUT  
  Y   SEPARATE ILLUSTRATION
 

#HEBP11040803
 

1U-2425: TOOTH GP-UNI

1U2425 TOOTH GROUP
FOR USE WITH MULTI-PURPOSE BUCKETS
AN ATTACHMENT
c180211 HEBP1104
1U2425 TOOTH GP-UNI Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-2933 [12] NUT  
2. 5P-8823 [2] BOLT  
3. 8J-2928 [12] BOLT  
4. 1U-1878 [1] TOOTH (L.H.)  
5. 1U-1877 [6] TOOTH  
6. 1U-1879 [1] TOOTH (R.H.)  
7. 5P-8362 [2] NUT  
 

#HEBP11040804
 

9J-3167: TIP GP-LONG

9J3167 TIP GROUP
Part of 8J6588 & 1U629 Tooth Groups shown on Pages 258 & 258B
AN ATTACHMENT
c229056 HEBP1104
9J3167 TIP GP-LONG Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2308 [1] PIN-G.E.T.  
2. 3G-9609 C [1] RETAINER-G.E.T.  
3. 1U-3302 C [1] TIP-LONG  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP11040805
 

5K-1613: TOOTH GROUP

5K1613 TOOTH GROUP--Short Tip
FOR USE WITH MULTI-PURPOSE BUCKET ARRANGEMENT
AN ATTACHMENT
c103012 HEBP1104
5K1613 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6K-3960 [9] ADAPTER  
  2J-3506 [18] NUT  
  1D-4610 [18] BOLT  
  4K-4719 [9] PLATE  
  4K-0043 [9] PIN  
  4K-0041 [9] PLUG  
  5K-2925 [9] TIP  
 

#HEBP11040806
 

4K-3330: TOOTH GP-SCARIFIER

4K3330 RIPPER-SCARIFIER TOOTH GROUP--9 Teeth
AN ATTACHMENT
c90355 HEBP1104
4K3330 TOOTH GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5K-1459 [9] PIN  
  5K-1458 [9] GROMMET  
  9F-5124 [9] SHANK  
  2D-5572 [9] TOOTH  
  6B-3260 [1] TOOL  
    (NOT SHOWN - USED TO REMOVE TEETH)
 

#HEBP11040807
 

8J-7748: CUTTING EDGE GROUP

8J7748 CUTTING EDGE GROUP--Field Installation
FOR USE WITH 8K9039 BUCKET ASSEMBLY SHOWN ON PAGE 246
PROVIDES BOLT-ON CUTTING EDGE
HEBP11040807 HEBP1104
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4F-4042 [9] BOLT 3.00" LONG  
  1J-5607 [9] BOLT 2.75" LONG  
  2J-3507 [9] NUT  
  8J-7746 [1] EDGE (CENTER SECTION)  
  8J-7747 [2] EDGE (END SECTION)  
 

#HEBP11040808
 

1U-1463: CUTTING EDGE GROUP

1U1463 CUTTING EDGE GROUP
FOR USE WITH 8K1861 CUTTING EDGE. Provides bolt-on cutting edge
AN ATTACHMENT
HEBP11040808 HEBP1104
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1U-1465 [1] EDGE CENTER  
  1U-1465 [2] EDGE END  
  1J-5607 [9] BOLT  
  2J-3507 [9] NUT  
 

#HEBP11040809
 

1U-1931: BIT AND CUTTING EDGE GROUP

1U1931 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7275 BASE EDGE SHOWN ON PAGE 253B-2
AN ATTACHMENT
c178473 HEBP1104
1U1931 BIT AND CUTTING EDGE GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4042 [12] BOLT  
  2J-3507 [12] NUT  
2. 1U-2413 [2] EDGE  
3. 3G-9512 [2] BIT  
 

Information:

Special Instruction
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08
Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2006/02/06
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 950 :

TOOTH GROUP
8J-6588 TOOTH GROUP
TOOTH GROUP
8J-6589 TOOTH GROUP
CONTROL GP-BUCKET
8K-5241 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8K-5241 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8K-5241 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8K-5241 CONTROL GP-BUCKET
CONTROL GP-BUCKET
8K-5241 CONTROL GP-BUCKET
SIGHT INDICATOR GROUP
7K-0689 SIGHT INDICATOR GROUP
TIP GP-SHORT
9J-3175 TIP GP-SHORT
TOOTH GP-LONG
1U-0629 TOOTH GP-LONG
TOOTH GP-UNI
1U-2425 TOOTH GP-UNI
TIP GP-LONG
9J-3167 TIP GP-LONG
TOOTH GROUP
5K-1613 TOOTH GROUP
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
8J-7748 CUTTING EDGE GROUP
1U-1463 CUTTING EDGE GROUP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.