AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J1698 BOOM CYLINDER GROUP--5.50" Bore x 42.50" Stroke--2 Required Part of 8K1443 Boom Arrangement and 1V1320 Stub Boom Arrangement listed on Pages 252 and 254 225


HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
CAB GP

EXCAVATOR 225 EXCAVATOR 76U
 225 EXCAVATOR 76U00694-01199 (MACHINE) POWERED BY 3304 ENGINE HEBP1114 225 76U   (1972)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP
9J-5153 CYLINDER GP
CYLINDER GP
8J-1698 CYLINDER GP
CYLINDER GP
8J-1698 CYLINDER GP
CYLINDER GP
8J-1698 CYLINDER GP
CYLINDER GP-STICK
9J-1755 CYLINDER GP-STICK
CYLINDER GP-STICK
9J-1755 CYLINDER GP-STICK
CYLINDER GP-STICK
9J-1755 CYLINDER GP-STICK
CYLINDER GP-BUCKET
9J-7006 CYLINDER GP-BUCKET
 

#HEBP11140370
 

8J-1698: CYLINDER GP

8J1698 BOOM CYLINDER GROUP--5.50" Bore x 42.50" Stroke--2 Required
Part of 8K1443 Boom Arrangement and 1V1320 Stub Boom Arrangement listed on Pages 252 and 254
c201179 HEBP1114
8J1698 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 2J-7686 [1] NUT  
4. 8J-1690 [1] RING  
5. 5J-4988 [1] SEAL ASSEM.  
6. 8J-1691 [1] PISTON  
7. 5J-8300 [1] SEAL  
8. 8J-1695 [1] STOP  
9. 8J-1697 R [1] CYLINDER ASSEM.  
10. 8J-1689 [1] RING (back-up)  
11. 8J-1688 [1] SEAL (o-ring)  
12. 1A-8537 [6] BOLT (2.75 in. long)  
13. 8J-8868 [1] HEAD  
14. 2B-7408 [2] PLUG  
15. 8J-2547 R [1] ROD  
16. 6J-4169 [1] SEAL  
17. 5J-8325 [1] SEAL  
18. 6J-7167 [1] SEAL  
19. 3B-4510 [8] LOCKWASHER  
20. 1D-4586 [2] BOLT (3.50 in. long)  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140371
 

8J-1698: CYLINDER GP

8J1698 BOOM CYLINDER GROUP--(Changes V3 & V4)--139.7 mm (5.5") Bore x 1079.5 mm (42.5") Stroke--2 Required--Type 2
Part of 8K1443 Boom and 1V1320 Stub Boom Arrangements listed on Pages 252 and 254
AN ATTACHMENT
c214630 HEBP1114
8J1698 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 2J-7686 [1] NUT  
4. 9J-7191 C [1] RING  
5. 8J-8767 C [1] SEAL ASSEM.  
6. 3G-2994 C [1] PISTON  
7. 5J-8300 [1] SEAL  
8. 3G-2323 C [1] STOP  
9. 8J-1697 R [1] CYLINDER ASSEM.  
10. 8J-1689 [1] RING (back-up)  
11. 8J-1688 [1] SEAL (o-ring)  
12. 1A-8537 [6] BOLT 69.85 mm(2.75 in.) long  
13. 8J-8868 [1] HEAD  
14. 2B-7408 [2] PLUG  
15. 8J-2547 R [1] ROD  
16. 6J-4169 [1] SEAL  
17. 5J-8325 [1] SEAL  
18. 6J-7167 [1] SEAL  
19. 3B-4510 [8] LOCKWASHER  
20. 1D-4586 [2] BOLT 88.90 mm(3.50 in.) long  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140372
 

8J-1698: CYLINDER GP

8J1698 BOOM CYLINDER GROUP--(Change V5)--139.7 mm (5.5") Bore x 1079.5 mm (42.5") Stroke--2 Required--Type 3
Part of 8K1443 Boom and 1V1320 Stub Boom Arrangements listed on Pages 252 and 254
AN ATTACHMENT
c219187 HEBP1114
8J1698 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 2J-7686 [1] NUT  
4. 9J-7191 [1] RING  
5. 8J-8767 [1] SEAL ASSEM.  
6. 3G-2994 [1] PISTON  
7. 1D-4586 [2] BOLT 88.90 mm(3.50 in.) long  
8. 3G-2995 C [1] STOP  
9. 8J-1697 R [1] CYLINDER ASSEM.  
10. 8J-1689 [1] RING (back-up)  
11. 8J-1688 [1] SEAL (o-ring)  
12. 1A-8537 [6] BOLT 69.85 mm(2.75 in.) long  
13. 8J-8868 [1] HEAD  
14. 2B-7408 [2] PLUG  
15. 8J-2547 R [1] ROD  
16. 6J-4169 [1] SEAL  
17. 5J-8325 [1] SEAL  
18. 6J-7167 [1] SEAL  
19. 3B-4510 [8] LOCKWASHER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140373
 

9J-1755: CYLINDER GP-STICK

9J1755 STICK CYLINDER GROUP (Change V0)--6.00" Bore x 56.00" Stroke
Part of 8K1443 Boom Arrangement and 1V1318 Fore Boom Arrangement listed on Pages 252 and 254
AN ATTACHMENT
c155932 HEBP1114
9J1755 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 8J-8731 [1] BOLT  
4. 9J-1237 [1] STOP  
5. 5J-8238 [1] SEAL  
6. 4J-6888 [1] NUT  
7. 8J-1746 [1] RING  
8. 9J-1242 [1] SEAL ASSEM.  
9. 9J-2114 [1] PISTON  
10. 5J-8350 [1] SEAL  
11. 8J-6072 [1] STOP  
12. 9J-1754 R [1] CYLINDER ASSEM.  
13. 8J-1717 [1] RING (Back-Up)  
14. 6D-9157 [1] SEAL (O-Ring)  
15. 9J-5693 [1] HEAD  
16. 1D-4610 [6] BOLT  
17. 1D-4612 [2] BOLT  
18. 5H-1504 [8] WASHER  
19. 2B-7408 [2] PLUG  
20. 9J-1243 R [1] ROD  
21. 8J-6069 [1] SEAL  
    -OR-
  9J-1325 [1] SEAL (Fire Resistant)  
22. 5J-8375 [1] SEAL  
    -OR-
  9J-1328 [1] SEAL ASSEM. (Fire Resistant)  
23. 8J-6070 [1] RING  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140374
 

9J-1755: CYLINDER GP-STICK

9J1755 STICK CYLINDER GROUP--(Change V1(--152.4 mm (6") Bore x 1422.4 mm (56") Stroke--Type 2
Part of 8K1443 Boom and 1V1318 Fore Boom Arrangements listed on Pages 252 and 254
AN ATTACHMENT
c165554 HEBP1114
9J1755 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 8J-8731 [1] BOLT  
4. 3G-2912 C [1] STOP  
5. 3G-2911 C [1] SEAL ASSEM.  
6. 4J-6888 [1] NUT  
7. 8J-1746 [1] RING  
8. 9J-1242 [1] SEAL ASSEM.  
9. 9J-2114 [1] PISTON  
10. 5J-8350 [1] SEAL  
11. 8J-6072 [1] STOP  
12. 9J-1754 R [1] CYLINDER ASSEM.  
13. 8J-1717 [1] RING (Back-Up)  
14. 6D-9157 [1] SEAL (O-Ring)  
15. 9J-5693 [1] HEAD  
16. 1D-4610 [6] BOLT  
17. 1D-4612 [2] BOLT  
18. 5H-1504 [8] WASHER  
19. 2B-7408 [2] PLUG  
20. 9J-1243 R [1] ROD  
21. 8J-6069 [1] SEAL  
    -OR-
  9J-1325 [1] SEAL (Fire Resistant)  
22. 5J-8375 [1] SEAL  
    -OR-
  9J-1328 [1] SEAL ASSEM. (Fire Resistant)  
23. 8J-6070 [1] RING  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140375
 

9J-1755: CYLINDER GP-STICK

9J1755 STICK CYLINDER GROUP--(Changes V2 & V3)--152.4 mm (6") Bore x 1422.4 mm (56") Stroke--Type 3
Part of 8K1443 Boom and 1V1318 Fore Boom Arrangements listed on Pages 252 and 254
AN ATTACHMENT
c215691 HEBP1114
9J1755 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 8J-8731 [1] BOLT  
4. 3G-2912 C [1] STOP  
5. 3G-2911 C [1] SEAL ASSEM.  
6. 4J-6888 [1] NUT  
7. 8J-1746 [1] RING  
8. 9J-1242 [1] SEAL ASSEM.  
9. 9J-2114 [1] PISTON  
10. 8J-6070 [1] RING  
11. 3G-2909 C [1] STOP  
12. 9J-1754 R [1] CYLINDER ASSEM.  
13. 8J-1717 [1] RING (Back-Up)  
14. 6D-9157 [1] SEAL (O-Ring)  
15. 9J-5693 [1] HEAD  
16. 1D-4610 [6] BOLT  
17. 1D-4612 [2] BOLT  
18. 5H-1504 [8] WASHER  
19. 2B-7408 [2] PLUG  
20. 9J-1243 R [1] ROD  
21. 8J-6069 [1] SEAL  
    -OR-
  9J-1325 [1] SEAL (Fire Resistant)  
22. 5J-8375 [1] SEAL  
    -OR-
  9J-1328 [1] SEAL ASSEM. (Fire Resistant)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140376
 

9J-7006: CYLINDER GP-BUCKET

9J7006 BUCKET CYLINDER GROUP (Change V0-V3)--5.50" Bore x 42.50" Stroke
Part of 2V8361 Hoe Bucket Linkage Arrangement listed on Page 265
AN ATTACHMENT
c156135 HEBP1114
9J7006 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5919 [4] SEAL ASSEM.  
2. 8J-4411 [2] BEARING ASSEM.  
3. 8J-4417 [1] BOLT  
4. 9J-7009 [1] STOP  
5. 5J-8200 [1] SEAL  
6. 2J-7686 [1] NUT  
7. 9J-7191 [1] RING  
8. 5J-4988 [1] SEAL ASSEM.  
9. 9J-7008 [1] PISTON  
10. 5J-8300 [1] SEAL  
11. 8J-1687 [1] STOP  
12. 9J-7005 R [1] CYLINDER ASSEM.  
13. 8J-1689 [1] RING (back-up)  
14. 8J-1688 [1] SEAL (o-ring)  
15. 8J-8868 [1] HEAD  
16. 1D-4586 [2] BOLT  
17. 2B-7408 [2] PLUG  
18. 9J-7004 R [1] ROD  
19. 6J-4169 [1] SEAL  
20. 5J-8325 [1] SEAL  
21. 6J-7167 [1] RING  
22. 1A-8537 [6] BOLT  
23. 3B-4510 [8] LOCKWASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11140377
 

5C-0960: CAB GROUP

5C960 CAB GROUP (8K154 N/S)--Part 1 of 2--Replaced by 8K4740 shown on
Pages 234 and 235
5C1040 Cab Door parts are shown on Page 241
c211167 HEBP1114
5C0960 CAB GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0804 SEAL (use as required)  
2. 6A-9291 [1] GRAB HANDLE  
3. 5P-1283 SEAL (use as required)  
4. 8K-2317 [1] GLASS  
5. 6A-7313 [1] DOME LIGHT  
6. 6A-9289 [2] BRACKET  
7. 6A-9290 [2] GRAB HANDLE  
8. 8K-2319 [1] GLASS (rear)  
9. 8K-2316 [2] GLASS (side rear)  
10. 1D-4585 J [2] BOLT  
11. 4D-3704 CJ [6] WASHER  
12. 9K-8626 [1] BRACKET  
13. 8L-4468 [2] SCREW  
14. 5C-1040 Y [1] DOOR GROUP  
    (Separate Illustration)
15. 8K-2318 [2] GLASS (side front)  
16. 0S-1619 CJ [2] BOLT  
  9M-6527 [2] WASHER  
17. 0S-1625 J [3] BOLT  
  6K-9800 [3] SPACER  
18. 3F-1240 [1] GROMMET  
19. 0L-1351 CJ [1] BOLT  
  4B-4278 C [1] WASHER  
20. 4B-4158 [2] SCREW  
21. 3H-1118 [2] COTTER PIN  
22. 5D-8902 [1] BUMPER  
  4F-2294 [1] NUT  
23. 3H-5825 [1] SCREW  
  5C-1055 [1] WASHER  
  5C-0952 [1] WASHER  
24. 6A-9297 [1] LINER  
25. 6A-9296 [1] LINER  
26. 5C-1046 [1] HEADLINER  
  6A-9268 [38] RIVET  
27. 5C-1049 [1] LINER  
28. 5C-1054 [1] CATCH ASSEM.  
  0T-0102 [2] BOLT  
  3K-8909 [2] LOCKWASHER  
  [1] LATCH  
29. 5C-1051 [1] SPACER  
30. 5L-6688 [4] PLUG  
31. 1F-0748 [1] NUT  
32. 3B-4506 [1] LOCKWASHER  
33. 1D-4597 CJ [1] BOLT  
  3B-4510 CJ [1] LOCKWASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  J   NOT PART OF 5C960 CAB
 

#HEBP11140378
 

5C-0960: CAB GROUP

5C960 CAB GROUP (8K154 N/S)--Part 2 of 2--Replaced by 8K4740 shown on
Pages 234 and 235
5C1048 Harness, 5C1004 Windshield, 5C1020 Window and 5C1032 Hatch
parts are shown on Pages 236, 238, 239 and 241
c156305 HEBP1114
5C0960 CAB GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1032 Y [1] HATCH GROUP  
    (Separate Illustration)
2. 5C-1048 Y [1] HARNESS ASSEM.  
    (Separate Illustration)
3. 3F-1240 [1] GROMMET  
4. 5K-3546 [1] PLUG  
5. [1] STRAP  
6. 2V-0246 [2] LATCH  
7. 3K-4897 [4] PIN  
8. 1S-4244 [2] PIN  
9. [1] BOSS  
10. 5C-0970 [2] SCREW ASSEM.  
    (Each Includes)
  9F-2978 [1] NUT  
11. 6K-6361 [1] PLUG  
12. 6A-9236 [2] HINGE  
13. 9F-2978 [3] NUT  
14. 4K-9097 [2] NUT  
15. 6A-9208 [2] HINGE  
16. 6A-9066 [6] CATCH ASSEM.  
    (Each Includes)
17. 9F-2978 [1] NUT  
18. 5C-1052 [1] HANDLE ASSEM.  
19. 5C-1004 Y [1] WINDSHIELD GROUP  
    (Separate Illustration)
20. 5P-0806 H GASKET 26 dm(102.36 in.)  
21. 5C-1020 Y [1] WINDOW GROUP  
    (Separate Illustration)
22. 5P-0804 SEAL (use as required)  
23. 2V-0247 [1] BRACKET (R.H.)  
  2V-0248 [1] BRACKET (L.H.)  
24. 5C-1047 [1] HOLDER  
  6A-9268 [4] RIVET  
  4B-4274 [4] WASHER  
25. 6A-9237 [1] HEADLINER  
  6A-9310 [1] ANGLE  
26. 6A-9233 [1] CATCH  
27. 6A-9235 [2] BUSHING  
28. 2V-0245 [2] ROD  
29. 2V-0355 [2] SEAT  
30. 2V-0244 [2] SPRING  
31. 5C-3116 [1] GRAB HANDLE ASSEM.  
  H   ORDER BY THE DECIMETRE
  Y   SEPARATE ILLUSTRATION
 

#HEBP11140379
 

8K-4740: CAB GROUP

8K4740 CAB GROUP (8K154 N/S)--Part 1 of 2
1V9933 Windshield, 1V9961 Window, 5C1032 Hatch and 1V9947 Door
parts are shown on Pages 238, 239, 241 and 242
c151250 HEBP1114
8K4740 CAB GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] HATCH GROUP  
    (Separate Illustration)
2. 1V-9930 [1] HARNESS ASSEM.  
    (Includes)
  5P-0497 H WIRE (14 gauge)  
3. 5K-1668 [2] TERMINAL (fuse)  
4. 5P-0385 H TUBE 1.02 dm(4 in.)  
5. 5P-1475 H [1] TERMINAL (fan)  
6. 5P-0688 H TUBE 2.03 dm(8 in.)  
7. 4S-1988 [3] TERMINAL  
8. 6K-0615 [2] CONNECTOR  
9. 6K-0659 [2] TERMINAL (warning light)  
10. 9F-2978 [2] NUT  
11. 6A-9208 [2] HINGE  
12. 4K-9097 [3] NUT  
13. 9D-3769 [1] GROMMET  
14. 1V-9947 Y [1] DOOR GROUP  
    (Separate Illustration)
15. 6A-9291 [1] GRAB HANDLE  
16. 5L-6688 [4] PLUG BUTTON  
17. 5P-0804 SEAL (use as required)  
18. 1V-9961 Y [1] WINDOW GROUP  
    (Separate Illustration)
19. 5H-4871 [1] PLUG  
20. 5P-1041 B SEAL (use as required)  
21. 9D-3737 [1] PLUG  
22. 5P-4292 B SEAL (use as required)  
23. 1V-9933 Y [1] WINDSHIELD GROUP  
    (Separate Illustration)
24. 061-8844 [1] GROMMET  
25. 5P-4294 B SEAL (use as required)  
26. 6A-9233 [1] CATCH  
27. 6A-9235 [2] BUSHING  
28. 5C-1052 [1] HANDLE ASSEM.  
29. 6A-9237 [1] HEADLINER  
30. 6A-9310 [1] ANGLE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE DECIMETRE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 225 :

CYLINDER GP
9J-5153 CYLINDER GP
VALVE GP-QUICK OPENING
8J-7383 VALVE GP-QUICK OPENING
SWIVEL GP
8J-8402 SWIVEL GP
VALVE & CYLINDER GP
8J-8401 VALVE & CYLINDER GP
BOOM SPEED CONTROL GROUP
8K-0918 BOOM SPEED CONTROL GROUP
VALVE GP-CONTROL
8J-2429 VALVE GP-CONTROL
SWING BRAKE CONTROL GROUP
8K-0185 SWING BRAKE CONTROL GROUP
SPEED CONTROL VALVE GROUP--L.H.
8J-4358 SPEED CONTROL VALVE GROUP--L.H.
CYLINDER GP
8J-1698 CYLINDER GP
CYLINDER GP
8J-1698 CYLINDER GP
CYLINDER GP-STICK
9J-1755 CYLINDER GP-STICK
CYLINDER GP-STICK
9J-1755 CYLINDER GP-STICK
CYLINDER GP-STICK
9J-1755 CYLINDER GP-STICK
CYLINDER GP-BUCKET
9J-7006 CYLINDER GP-BUCKET
CAB GROUP
5C-0960 CAB GROUP
CAB GROUP
5C-0960 CAB GROUP

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.