AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7J9660 LIFT CYLINDER GROUP (Change B2)--(7K9396 N/S)--L.H.--6.50" Bore x 36.70" Stroke--Replaced by 8G8118--Page 208A AN ATTACHMENT 977K


HYDRAULIC SYSTEM
CYLINDER GP
KICKOUT & POSITIONER GP

TRACK LOADER 977K TRACK LOADER 48J
 977L TRAXCAVATOR 48J02011-UP (MACHINE) POWERED BY 3306 ENGINE HEBP1139 977K 48J   (1968)

HYDRAULIC SYSTEM

CYLINDER GP
LIFT CYLINDER GROUP
7J-9659 LIFT CYLINDER GROUP
CYLINDER GP-LIFT
3G-8119 CYLINDER GP-LIFT
LIFT CYLINDER GROUP
7J-9660 LIFT CYLINDER GROUP
CYLINDER GP-LIFT
3G-8118 CYLINDER GP-LIFT
LIFT CYLINDER BRACE GROUP
8P-7781 LIFT CYLINDER BRACE GROUP
TILT CYLINDER GROUP
9J-0672 TILT CYLINDER GROUP
 

#HEBP11390340
 

7J-9660: LIFT CYLINDER GROUP

7J9660 LIFT CYLINDER GROUP (Change B2)--(7K9396 N/S)--L.H.--6.50" Bore x 36.70" Stroke--Replaced by 8G8118--Page 208A
AN ATTACHMENT
c207551 HEBP1139
7J9660 LIFT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-1938 [1] RING  
2. 5J-4991 [1] SEAL ASSEM.  
3. 7J-1937 [1] WASHER  
4. 2K-4472 [1] SEAL  
5. 2K-4473 [1] WASHER  
6. 3B-2968 [6] BOLT  
  5H-1504 [12] WASHER  
7. 5F-3498 [1] PACKING  
8. 2J-0491 [1] RETAINER  
9. 9J-7881 RC [1] ROD ASSEM.  
10. 7J-9345 [1] BEARING  
11. 5P-0066 H [2] SEAL  
12. 7J-8274 [1] SEAL  
13. 5F-3500 [6] SHIM  
14. 7J-0486 [1] HEAD  
15. 7J-9642 [1] CYLINDER ASSEM. (Left Hand)  
16. 5J-5370 [2] BEARING  
17. 7J-1932 [1] PISTON  
18. 5J-3488 [1] NUT  
19. 7J-4577 [1] SHIELD ASSEM. (R.H.)  
  7J-4578 [1] SHIELD ASSEM. (L.H.)  
20. 0S-1591 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF 7J9660 CYLINDER GROUP
 

#HEBP11390341
 

3G-8118: CYLINDER GP-LIFT

3G8118 LIFT CYLINDER GROUP (Change 0)--(7K9396 N/S)--L.H.--165.1 mm (6.5") Bore x 931 mm (36.7") Stroke--
Replaces 7J9660--Page 208
AN ATTACHMENT
c223056 HEBP1139
3G8118 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-9806 [1] RING  
2. 8J-8703 [1] SEAL ASSEM.  
3. 7J-1937 [1] WASHER  
4. 2K-4472 [1] SEAL  
5. 2K-4473 [1] RING  
6. 0S-1594 [6] BOLT  
7. 5F-3498 [1] PACKING  
8. 2J-0491 [1] RETAINER  
9. 9J-7881 R [1] ROD ASSEM.  
    (Includes)
10. 7J-9345 [1] BEARING  
11. 5P-0066 H [2] SEAL  
12. 7J-8274 [1] SEAL  
13. 5F-3500 [6] SHIM (use as required)  
14. 7J-0486 [1] HEAD  
15. 7J-9642 [1] CYLINDER ASSEM. (left hand)  
    (Includes)
16. 5J-5370 [2] BEARING  
17. 9J-9805 [1] PISTON  
18. 5J-3488 [1] NUT  
19. 3G-8102 [2] SHIELD  
20. 0S-1591 [4] BOLT  
21. 3G-8103 [1] SPACER  
22. 5M-2894 [10] WASHER  
23. 5P-8248 [12] WASHER  
24. 0S-1627 [6] BOLT  
  H   NOT PART OF 3G8118 CYLINDER GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11390342
 

8P-7781: LIFT CYLINDER BRACE GROUP

8P7781 LIFT CYLINDER BRACE GROUP
Serial No. 48J2380-Up
c167781 HEBP1139
8P7781 LIFT CYLINDER BRACE GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-5344 [1] PLATE ASSEM.  
2. 8P-5340 [1] PLATE ASSEM.  
3. 0S-1585 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
4. 3K-4897 [1] PIN 3.18 mm(.125 in.) diameter  
  7M-5130 [1] PIN 6.35 mm(.25 in.) diameter  
5. 8P-5335 [1] BRACE ASSEM.  
6. 9P-3479 [2] KNOB ASSEM.  
    (Each Includes)
7. 6D-5356 [1] KNOB  
8. 1D-4719 [1] NUT  
9. 8P-5339 [1] ROD  
 

#HEBP11390343
 

9J-0672: TILT CYLINDER GROUP

9J672 TILT CYLINDER GROUP (Change B3)--(3P6137 N/S)--R.H.--152 mm (6") Bore x 696 mm (27.40") Stroke
c173874 HEBP1139
9J0672 TILT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
2. 9J-0668 R [1] CYLINDER ASSEM. (R.H.)  
    (Includes)
3. 7J-9346 [1] BEARING  
4. 5H-1504 [8] WASHER  
5. 3J-6899 [1] NUT  
6. 7J-5326 C [1] RING  
7. 5J-4989 C [1] SEAL ASSEM.  
8. 9J-8054 C [1] PISTON  
9. 5H-3252 [1] SEAL  
10. 2K-3258 [1] RING  
11. 9J-4991 C [1] HEAD  
12. 6J-6553 [1] SEAL  
13. 5J-8275 [1] SEAL  
14. 1J-3540 [1] SEAL  
15. 7J-9377 R [1] ROD ASSEM.  
16. 7J-9346 [1] BEARING  
17. 5P-0064 H [4] SEAL  
18. 3B-2968 [2] BOLT  
19. 1D-4610 [6] BOLT  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF 9J672 CYLINDER GROUP
 

#HEBP11390344
 

9J-0673: TILT CYLINDER GROUP

9J673 TILT CYLINDER GROUP (Change B4)--(3P6138 N/S)--L.H.--6" Bore x 27.40" Stroke
c159266 HEBP1139
9J0673 TILT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7408 [1] PLUG  
    (Includes)
3. 9J-0665 [1] PLATE  
4. 7J-9346 [1] BEARING  
5. 3J-6899 [1] NUT  
6. 7J-5326 C [1] RING  
7. 5J-4989 C [1] SEAL ASSEM.  
8. 9J-8054 C [1] PISTON  
9. 5H-3252 [1] SEAL  
10. 2K-3258 [1] RING  
11. 6J-6553 [1] SEAL  
12. 9J-4991 C [1] HEAD  
13. 3B-2968 [2] BOLT  
14. 1J-3540 [1] SEAL  
15. 7J-9648 R [1] ROD ASSEM.  
    (Includes)
16. 7J-9346 [1] BEARING  
17. 5P-0064 H [4] SEAL  
18. 5J-8275 [1] SEAL  
19. 1D-4610 [6] BOLT  
  5H-1504 [8] WASHER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF 9J673 CYLINDER GROUP
 

#HEBP11390345
 

9J-0671: TILT CYLINDER GROUP

9J671 TILT CYLINDER GROUP (Change 2)--(3P6139 N/S)--R.H.--152.4 mm (6 in.) Bore x 696 mm (27.40 in.) Stroke
AN ATTACHMENT
c172738 HEBP1139
9J0671 TILT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0668 RC [1] CYLINDER ASSEM. (R.H.)  
    (Includes)
2. 7J-9346 [1] BEARING  
3. 9J-8054 C [1] PISTON  
4. 1D-4612 [2] BOLT  
5. 7F-5227 [6] BOLT  
6. 5H-1504 [16] WASHER  
7. 5F-3498 [1] PACKING  
8. 7J-8274 [1] SEAL  
9. 7J-9377 R [1] ROD ASSEM.  
10. 7J-9346 [1] BEARING  
11. 5P-0064 H [4] SEAL  
12. 5J-4989 C [1] SEAL ASSEM.  
13. 7J-5326 C [1] RING  
14. 2B-7408 [1] PLUG  
15. 5H-3252 [1] SEAL  
16. 2K-3258 [1] RING  
17. 7J-0491 [1] HEAD  
18. 0S-1591 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
19. 2J-0491 [1] RETAINER  
20. 5F-3500 [6] SHIM  
21. 7J-4580 [1] SHIELD ASSEM. (L.H.)  
  7J-4579 [1] SHIELD ASSEM. (R.H.)  
22. 3J-6899 [1] NUT  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF 9J671 CYLINDER GROUP
 

#HEBP11390346
 

9J-0670: TILT CYLINDER GROUP

9J670 TILT CYLINDER GROUP (Change 2)--(3P6140 N/S)--L.H.--6" Bore x 27.40" Stroke
Part of 6K5440 Hydraulic Arrangement listed on Page 165
AN ATTACHMENT
c157578 HEBP1139
9J0670 TILT CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0669 R [1] CYLINDER ASSEM. (L.H.)  
    (Includes)
2. 9J-0665 [1] PLATE  
3. 7J-9346 [1] BEARING  
4. 5P-0064 H [4] SEAL  
5. 7F-5227 [6] BOLT  
6. 5H-1504 [16] WASHER  
7. 5F-3498 [1] PACKING  
8. 7J-8274 [1] SEAL  
9. 7J-9648 R [1] ROD ASSEM.  
10. 7J-9346 [1] BEARING  
12. 5J-4989 C [1] SEAL ASSEM.  
13. 7J-5326 C [1] RING  
14. 2B-7408 [1] PLUG  
15. 5H-3252 [1] SEAL  
16. 2K-3258 [1] RING  
17. 7J-0491 [1] HEAD  
18. 0S-1591 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
19. 2J-0491 [1] RETAINER  
20. 5F-3500 [6] SHIM  
21. 7J-4579 [1] SHIELD ASSEM. (R.H.)  
  7J-4580 [1] SHIELD ASSEM. (L.H.)  
22. 3J-6899 [1] NUT  
23. 1D-4612 [2] BOLT  
24. 9J-8054 C [1] PISTON  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF 9J670 CYLINDER GROUP
 

#HEBP11390347
 

8J-5749: CYLINDER GROUP

8J5749 CYLINDER GROUP (Change 0)--(9K3175 N/S)--5" Bore x 23.31" Stroke
Part of 6K707 Side Dump Bucket Arrangement listed on Page 223
AN ATTACHMENT
c147787 HEBP1139
8J5749 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-5731 [1] NUT  
2. 4J-3420 [1] RING  
3. 7J-2466 [1] PISTON  
4. 5J-9883 [1] HEAD  
5. 1D-4608 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
6. 3B-1915 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
7. 5J-2630 [1] RETAINER  
8. 8J-5753 [1] ROD ASSEM.  
9. 7J-9344 [1] BEARING  
10. 5P-0065 H [4] SEAL  
11. 5J-2629 [6] SHIM  
12. 2K-4434 [1] PACKING  
13. 2K-4069 [1] RING  
14. 5F-3144 [1] SEAL  
15. 5J-5020 [1] SEAL ASSEM.  
16. 8J-5750 [1] CYLINDER ASSEM.  
17. 8J-5778 [1] BEARING  
19. 7J-2467 [1] WASHER  
20. 4J-3515 [1] SEAL  
21. 3B-8489 [1] FITTING  
  H   NOT PART OF 8J5749 CYLINDER GROUP
 

#HEBP11390348
 

9J-1822: CYLINDER GP

9J1822 CYLINDER GROUP (Change 0)--(1V4771 N/S)--5" Bore x 14" Stroke
Part of 1V3669 Multi-Purpose Bucket Arrangement listed on Page 220
AN ATTACHMENT
c153450 HEBP1139
9J1822 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5748 [1] ROD ASSEM.  
    (Includes)
2. 7J-9745 [1] BEARING  
3. 2J-3950 [1] NUT  
4. 4J-4630 [1] RING  
5. 5J-5020 [1] SEAL ASSEM.  
6. 5J-1922 [1] PISTON  
7. 9J-2050 R [1] CYLINDER ASSEM.  
    (Includes)
8. 8J-5746 [1] BEARING  
9. 5F-3144 [1] SEAL  
10. 2K-4096 [1] RING  
11. 6J-1163 [1] HEAD  
12. 3F-9609 [1] PACKING  
13. 2J-3864 [1] SHIM .0478 in.(1.21 mm) thick  
  2J-3861 [6] SHIM .010 in.(0.26 mm) thick  
14. 2J-3860 [1] RETAINER  
15. 1K-6981 [1] SEAL  
16. 3B-1915 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
17. 1D-4627 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
18. 5P-0071 H [2] SEAL  
19. 5P-0065 H [2] SEAL  
  H   NOT PART OF 9J1822 CYLINDER GR
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP11390349
 

5K-6006: KICKOUT GROUP

5K6006 KICKOUT GROUP
c204562 HEBP1139
5K6006 KICKOUT GROUP Parts scheme
  For full view, you need register

Parts for your 977K TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-1961 [1] SPRING  
2. 6K-1962 [1] BAR ASSEM.  
3. 1B-4737 [1] ROD END  
4. 5B-9079 [1] NUT  
5. 3B-4506 [7] LOCKWASHER  
6. 2J-8262 C [1] ROLLER  
7. 0S-0509 [2] BOLT  
8. 4B-4278 [2] WASHER  
9. 5K-7087 [1] LEVER  
10. 1B-8704 [2] KEY  
11. 6K-7711 [1] BRACKET ASSEM.  
12. 4D-2619 [2] BEARING  
13. 3B-1915 [2] BOLT  
14. 1D-4717 [2] NUT  
15. 5K-6521 [1] LEVER  
16. 0S-0175 [3] PIN  
17. 3B-4617 [3] COTTER PIN  
18. 5K-7090 [1] ROD  
19. 1B-4430 [1] NUT  
20. 6F-7010 [1] ROD END  
21. 0L-1351 [4] BOLT (.875" long)  
    -OR-
  1A-2029 [4] BOLT (1.125" long)  
22. 5K-7089 [1] SHAFT  
23. 8S-8757 [1] BRACKET ASSEM.  
24. 6K-0016 [1] LEVER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
977 TRACK-TYPE LOADER HYDRAULIC SYSTEM
Lift Cylinders<BR> (7K9385, 7K9386)
977L TRACK-TYPE LOADER HYDRAULIC SYSTEM
Tilt Cylinders<BR> (3P6137, 3P6138)
977L TRACK-TYPE LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Multipurpose Bucket Cylinders
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Tilt Cylinders
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Lift Cylinders
977L TRACK-TYPE LOADER VEHICLE SYSTEMS
Service Magazine
New Lift Cylinder Assemblies {5102}
1983/04/18
Use New Drift Rate Chart When Testing And Troubleshooting Cylinder Drift In Hydraulic Circuits{5050,5100}
1979/04/02
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 977K :

CYLINDER GP-LIFT
3G-8119 CYLINDER GP-LIFT
LIFT CYLINDER GROUP
7J-9659 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-9376 LIFT CYLINDER GROUP
LIFT CYLINDER GROUP
7J-9375 LIFT CYLINDER GROUP
LINES GP-HYDRAULIC
1V-3668 LINES GP-HYDRAULIC
HYDRAULIC LINES GROUP
6K-1721 HYDRAULIC LINES GROUP
LINES GP-REAR HYDRAULIC
2P-7607 LINES GP-REAR HYDRAULIC
LINES GP-REAR HYDRAULIC
2P-7607 LINES GP-REAR HYDRAULIC
CYLINDER GP-LIFT
3G-8118 CYLINDER GP-LIFT
LIFT CYLINDER BRACE GROUP
8P-7781 LIFT CYLINDER BRACE GROUP
TILT CYLINDER GROUP
9J-0672 TILT CYLINDER GROUP
TILT CYLINDER GROUP
9J-0673 TILT CYLINDER GROUP
TILT CYLINDER GROUP
9J-0671 TILT CYLINDER GROUP
TILT CYLINDER GROUP
9J-0670 TILT CYLINDER GROUP
CYLINDER GROUP
8J-5749 CYLINDER GROUP
CYLINDER GP
9J-1822 CYLINDER GP

Truck sale:

Caterpillar 977K, Construction
10,250 USD 
Caterpillar 977K, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Caterpillar 977K, Construction
9,500 
Caterpillar 977K, Construction
- track loaders
MICHIGAN CAT
CATERPILLAR 977K 1969
 
CATERPILLAR 977K 1969
- TRACK LOADERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
3508 - 1974 CAT 977K
 
3508 - 1974 CAT 977K

avspare
1970 CAT 977K
USD $9,500 
1970 CAT 977K

WEACO EQUIPMENT
Womelsdorf, Pennsylvania
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.