AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6K1284 SIDE DUMP BUCKET ARRANGEMENT--2.3 Cubic Meters (3.0 Cubic Yards)--3366 mm (132.5 in.) Wide AN ATTACHMENT 966C


WORK TOOLS
BUCKET GP
HYDRAULIC SYSTEM
KICKOUT & POSITIONER GP
WORK TOOLS
BUCKET GP
HYDRAULIC SYSTEM
CYLINDER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)

WHEEL LOADER 966C WHEEL LOADER 42J
 966 WHEEL LOADER - 42J06498-UP (MACHINE) POWERED BY 3306 ENGINE HEBP1147 966C 42J   (1968)

WORK TOOLS

BUCKET GP
7K-0996 MULTI-PURPOSE BUCKET ARRANGEMENT
1V-6370 MULTI-PURPOSE BUCKET ARRANGEMENT
6K-1284 SIDE DUMP BUCKET ARRANGEMENT
MULTI-PURPOSE BUCKET GROUP
6K-1598 MULTI-PURPOSE BUCKET GROUP
MULTI-PURPOSE BUCKET GROUP
1V-7289 MULTI-PURPOSE BUCKET GROUP
BUCKET AND SUPPORT GROUP
6K-1435 BUCKET AND SUPPORT GROUP
 

#HEBP11470700
 

6K-1284: SIDE DUMP BUCKET ARRANGEMENT

6K1284 SIDE DUMP BUCKET ARRANGEMENT--2.3 Cubic Meters (3.0 Cubic Yards)--3366 mm
(132.5 in.) Wide
AN ATTACHMENT
HEBP11470700 HEBP1147
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-5733 Y [1] CYLINDER GROUP  
  1V-3479 Y [1] FRONT HYDRAULIC LINES GROUP  
  6K-1435 Y [1] BUCKET AND SUPPORT GROUP  
  Y   SEPARATE ILLUSTRATION
 

#HEBP11470701
 

7K-0674: SIGHT INDICATOR GROUP

7K674 SIGHT INDICATOR GROUP
Part of 7K996 and 1V6370 Multi-Purpose Bucket Arrangements
listed on Page 284. AN ATTACHMENT
c124569 HEBP1147
7K0674 SIGHT INDICATOR GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] ANGLE  
2. [3] INDICATOR  
3. [3] BOLT  
  [3] NUT  
  [3] WASHER  
4. [1] BOLT  
 

#HEBP11470702
 

6K-1598: MULTI-PURPOSE BUCKET GROUP

6K1598 MULTI-PURPOSE BUCKET GROUP--Replaced by 1V7289 shown on Page 287
Part of 7K996 Multi-Purpose Bucket Arrangement listed on Page 284. AN ATTACHMENT
c175662 HEBP1147
6K1598 MULTI-PURPOSE BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-4045 [1] HINGE ASSEM  
    (RIGHT HAND-OUTER)
  4K-4043 [1] HINGE ASSEM.  
    (RIGHT HAND-INNER)
  4K-4046 [1] HINGE ASSEM  
    (LEFT HAND-INNER)
  4K-4044 [1] HINGE ASSEM  
    (LEFT HAND-OUTER)
    (PARTS OF BULLDOZER ASSEM 6K1409)
  6K-1409 [1] BULLDOZER ASSEM  
  7K-0184 [3] BLOCK  
  9K-1260 [4] BEARING ASSEM.  
  9K-1261 [8] SEAL  
    (2 In Each 9K1260 Assem.)
  2K-3656 [2] BAR  
    (Parts of 6K1409 Assem.)
  4K-4221 [2] BAR  
  4K-4666 [2] TIP  
    (Parts of 6K1409 Assem.)
  5J-6959 [2] END BIT  
    (END)
  5J-6963 [1] CUTTING EDGE  
    (CENTER)
  4F-7827 [19] BOLT  
  1B-4331 [19] NUT  
  4K-9158 [1] PLATE ASSEM  
    (Part of Bulldozer Assem. 6K1409)
  5K-3353 [1] PLATE  
    (Part of 1V8900 Assem.)
  4K-4857 [1] INDICATOR  
  1B-4331 [9] NUT  
    (Part of Bulldozer Assem. 6K1409)
  2B-0947 [2] BOLT  
  1D-4719 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  5K-2266 [2] WASHER BAR 101 mm(4 in.)long  
  0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  3B-8489 [2] FITTING  
  5B-0651 [2] FITTING  
  7K-8807 [2] PIN  
  4K-9256 [1] CUTTING EDGE  
    (FIELD REPLACEMENT-THE ABOVE PART IS NOT PART OF BUCKET GROUP 6K1598)
  2K-3656 [1] BAR  
    (Part of 1V8900 Assem.)
  1V-8900 C [1] BOWL ASSEM.  
  1V-8876 [2] PLATE  
    (Part of 1V8900 Assem.)
  8K-9754 [1] CUTTING EDGE  
    (Part of 1V8900 Assem.)
  C   INDICATES CHANGE
 

#HEBP11470703
 

1V-7289: MULTI-PURPOSE BUCKET GROUP

1V7289 MULTI-PURPOSE BUCKET GROUP
Part of 1V6370 Multi-Purpose Bucket Arrangement listed on Page 284
AN ATTACHMENT
c211123 HEBP1147
1V7289 MULTI-PURPOSE BUCKET GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4K-4045 [1] HINGE ASSEM. (RIGHT HAND-OUTER)  
  4K-4043 [1] HINGE ASSEM. (RIGHT HAND-INNER)  
  4K-4046 [1] HINGE ASSEM. (LEFT HAND-INNER)  
  4K-4044 [1] HINGE ASSEM. (LEFT HAND-OUTER)  
    (PARTS OF BULLDOZER ASSEM. 6K1409)
  6K-1409 [1] BULLDOZER ASSEM.  
  [3] BLOCK  
  9K-1260 [4] BEARING ASSEM.  
  2V-9003 C [8] SEAL  
    (2 in each 9K1260 Assem.)
  2K-3656 [2] BAR  
  4K-4666 [2] TIP  
  4K-4221 [1] BAR  
  4K-4497 [4] BAR  
    (Parts of 6K1409 Assem.)
  5J-6959 [2] END BIT (END)  
  5J-6963 [1] CUTTING EDGE (CENTER)  
  4F-7827 [19] BOLT  
  1B-4331 [19] NUT  
  4K-9158 [1] PLATE ASSEM.  
    (Part of Bulldozer Assem. 6K1409)
  1V-6233 [5] PLATE  
    (Part of 1V7059 Assem.)
  4K-4857 [1] INDICATOR  
  1B-4331 [9] NUT  
    (PART OF BULLDOZER ASSEM. 6K1409)
  2B-0947 [2] BOLT  
  1D-4719 [2] NUT  
  3B-4508 [2] LOCKWASHER  
  5K-2266 [2] WASHER BAR (4" LONG)  
  0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  3B-8489 [2] FITTING  
  5B-0651 [2] FITTING  
  7K-8807 [2] PIN  
  2K-3656 [1] BAR  
    (Part of 1V7059)
  1V-7059 [1] BOWL ASSEM.  
  6K-1611 [1] HINGE ASSEM. R.H.  
  6K-1612 [1] HINGE ASSEM. L.H.  
    (Parts of 1V7059 Assem.)
  8K-9754 [1] CUTTING EDGE  
  8K-7525 [1] CORNER R.H.  
  8K-7526 [1] CORNER L.H.  
    (Part of 1V7059 Assem.)
  C   INDICATES CHANGE
 

#HEBP11470704
 

6K-1435: BUCKET AND SUPPORT GROUP

6K1435 BUCKET AND SUPPORT GROUP
Part of 6K1284 Side Dump Bucket Arrangement listed on Page 285
AN ATTACHMENT
c205431 HEBP1147
6K1435 BUCKET AND SUPPORT GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2K-7709 [1] PIN  
  3B-8489 [1] FITTING  
  0S-1621 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  2K-0703 [1] WASHER BAR  
  9K-2264 C [1] BUCKET & SEAL GROUP  
  4K-9116 H [1] CUTTING EDGE  
    (FIELD SERVICE REPLACEMENT)
  3B-8489 [2] FITTING  
  3K-5544 [2] PIN  
  7K-9204 C [4] SEAL  
  9K-0668 C [2] BEARING  
    (Parts of 9K2264 Group)
  1D-4569 [2] BOLT  
  1K-6872 [2] NUT  
  5K-4034 [1] PLATE ASSEM.  
  5K-4032 [1] PLATE ASSEM.  
  5K-3991 [2] PLATE  
  1B-4331 [10] NUT  
    (Part of 9K2264 Group)
  3K-2603 [1] BEARING  
  3B-8489 [1] FITTING  
  3K-7371 [1] SPACER  
  3K-7398 [1] YOKE ASSEM.  
  3K-9655 [1] PIN  
  1D-4569 [1] BOLT  
  1K-6872 [1] NUT  
  3K-7372 [1] SPACER  
  5K-4033 [1] PLATE ASSEM.  
  2K-6638 [1] REINFORCEMENT  
  4K-9115 [1] CUTTING EDGE  
  2K-3656 [2] BAR  
    (Parts of 9K2264 Group)
  [2] BLOCK  
  5K-4031 [1] PLATE ASSEM.  
  4J-8979 C [1] SEAL  
  2K-8196 [1] BEARING  
    (PART OF LATCH ASSEM 5K3990)
  2B-4602 [2] PLUG  
  0S-1850 [1] SPRING  
  2K-6949 [1] COVER  
  2K-8169 [1] GASKET  
  0S-1594 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  5K-3990 [1] LATCH ASSEM.  
    (Part of 9K2264 Group)
  2K-6951 [1] PIN  
  C   INDICATES CHANGE
  H   NOT PART OF BUCKET AND SUPPORT
 

#HEBP11470705
 

4K-4263: CYLINDER MOUNTING GROUP

4K4263 CYLINDER MOUNTING GROUP
Part of 7K996 and 1V6370 Multi-Purpose Bucket Arrangements listed on Page 284
AN ATTACHMENT
c140863 HEBP1147
4K4263 CYLINDER MOUNTING GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7K-8805 C [1] PIN (L.H.)  
  7K-8808 C [1] PIN (R.H.)  
  4K-0061 [1] PIN (Indicator)  
  5B-0651 C [2] FITTING  
  0S-1621 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  5K-2266 [2] BAR  
  1B-2886 [2] BOLT  
  5B-0651 C [2] FITTING  
  7K-8806 C [2] PIN  
  1K-6872 [2] NUT  
 

#HEBP11470706
 

9J-2730: TOOTH GROUP

9J2730 TOOTH GROUP--8 Required--Type 1
FOR USE WITH GENERAL PURPOSE BUCKETS. 9J3167 Tip parts are shown on
Page 291. AN ATTACHMENT
c205432 HEBP1147
9J2730 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3507 [3] NUT  
2. 4J-9058 [1] BOLT  
3. 8J-5307 [1] ADAPTER  
4. 3K-5234 [1] WASHER  
5. 9J-3167 YC [1] TIP GROUP  
    (Separate Illustration)
6. 8J-2928 [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP11470707
 

9J-2730: TOOTH GROUP

9J2730 TOOTH GROUP--8 Required--Type 2
FOR USE WITH GENERAL PURPOSE BUCKETS
9J3167 Tip parts are shown on Page 291. AN ATTACHMENT
c168455 HEBP1147
9J2730 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-2933 C [3] NUT  
2. 8J-2928 C [3] BOLT  
3. 3G-5307 C [1] ADAPTER  
4. 9J-3167 Y [1] TIP GROUP  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP11470708
 

9J-2731: TOOTH GROUP

9J2731 TOOTH GROUP--Extreme Service--8 Required--Type 1
FOR USE WITH GENERAL PURPOSE BUCKETS. AN ATTACHMENT
c151093 HEBP1147
9J2731 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-3507 [3] NUT  
2. 4J-9058 [1] BOLT  
3. 8J-5307 [1] ADAPTER  
4. 9J-2308 [1] PIN  
5. 9J-4301 [1] TIP  
6. 8J-5309 [1] SPRING  
7. 8J-2928 [2] BOLT  
8. 3K-5234 [1] WASHER  
 

#HEBP11470709
 

9J-2731: TOOTH GROUP

9J2731 TOOTH GROUP--Extreme Service--8 Required--Type 2
FOR USE WITH GENERAL PURPOSE BUCKETS. AN ATTACHMENT
c168454 HEBP1147
9J2731 TOOTH GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-2933 C [3] NUT  
2. 3G-5307 C [1] ADAPTER  
3. 8J-2928 C [3] BOLT  
4. 9J-4301 C [1] TIP  
5. 9J-2308 [1] PIN  
  8J-5309 [1] RETAINER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Reinforcement Group On Side Dump Bucket And Support Assembly{6105}
Installation Of Reinforcement Group On Side Dump Bucket And Support Assembly{6105}
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Actuator For Bucket Positioner
966C WHEEL LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
966 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner
966 WHEEL LOADER VEHICLE SYSTEMS
Bucket Positioner Master Cylinder
966 WHEEL LOADER VEHICLE SYSTEMS
Service Magazine
Replacement Wear Plate Now Available For Use On Multi-Purpose Bucket{6104}
1981/02/16
New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16
Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30
Replacement Pin Bosses Available For Loader Bucket{6109}
1983/07/04
Replacement Tip Or Boss Assemblies Are Available For The Ends Of Bucket Lift Arms{6119}
1978/01/09
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24

Caterpillar Parts SIS Catalog 966C :

1V-6370 MULTI-PURPOSE BUCKET ARRANGEMENT
7K-0996 MULTI-PURPOSE BUCKET ARRANGEMENT
BUCKET GP-ROCK
7K-1075 BUCKET GP-ROCK
ROCK LOADING BUCKET ASSEMBLY
6K-1007 ROCK LOADING BUCKET ASSEMBLY
ROCK LOADING BUCKET ASSEMBLY
6K-1007 ROCK LOADING BUCKET ASSEMBLY
GENERAL PURPOSE BUCKET ASSEMBLY
6K-1258 GENERAL PURPOSE BUCKET ASSEMBLY
GENERAL PURPOSE BUCKET ASSEMBLY
6A-4946 GENERAL PURPOSE BUCKET ASSEMBLY
GENERAL PURPOSE BUCKET ASSEMBLY
9K-1611 GENERAL PURPOSE BUCKET ASSEMBLY
SIGHT INDICATOR GROUP
7K-0674 SIGHT INDICATOR GROUP
MULTI-PURPOSE BUCKET GROUP
6K-1598 MULTI-PURPOSE BUCKET GROUP
MULTI-PURPOSE BUCKET GROUP
1V-7289 MULTI-PURPOSE BUCKET GROUP
BUCKET AND SUPPORT GROUP
6K-1435 BUCKET AND SUPPORT GROUP
CYLINDER MOUNTING GROUP
4K-4263 CYLINDER MOUNTING GROUP
TOOTH GROUP
9J-2730 TOOTH GROUP
TOOTH GROUP
9J-2730 TOOTH GROUP
TOOTH GROUP
9J-2731 TOOTH GROUP

Truck sale:

Caterpillar 966C
 
Caterpillar 966C
- Wheel Loaders
PETERSON TRACTOR CO
Caterpillar 966C, Wheel Loaders, Construction
30,547 
Caterpillar 966C, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
31,209 
Caterpillar 966C, Wheel Loaders, Construction


Caterpillar 966C, Wheel Loaders, Construction
35,551 
Caterpillar 966C, Wheel Loaders, Construction

FINNING CANADA
Caterpillar 966C, Wielladers, Bouw
28.000 
Caterpillar 966C, Wielladers, Bouw
- Wheel loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.