ELECTRICAL AND STARTING SYSTEM
WIRING GPSWITCH GP
GLOW PLUG GP
ALTERNATOR GP-CHARGING
ELECTRICAL AND STARTING SYSTEM
WIRING GP#HEBP11620170
8P-4698: HARNESS AS
8P4698 HARNESS ASSEMBLY
Serial No. 20X1 to 20X1900 inclusive
Part of 8P4711 Battery and Wiring Group shown on Page 70
Serial No. 20X1 to 20X1900 inclusive
Part of 8P4711 Battery and Wiring Group shown on Page 70
#HEBP11620171
8P-4699: HARNESS AS
8P4699 HARNESS ASSEMBLY
Part of 8P4711 Battery and Wiring Group shown on Pages 71, 72B and 72E
Part of 8P4711 Battery and Wiring Group shown on Pages 71, 72B and 72E
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-1034 | [1] | SHELL | |
| 2R-1033 | [1] | WASHER | ||
| 3M-6018 | [1] | TERMINAL | ||
| 2. | 2L-8054 | [1] | TERMINAL | |
| 3. | 2L-8071 | [1] | TERMINAL | |
| 4. | 2L-8076 | [1] | TERMINAL | |
| 5. | 5P-3160 | [1] | CONNECTOR | |
| (Includes) | ||||
| 5P-6642 | WIRE 1.60 m(63 in.) | |||
| THE FOLLOWING WIRE ARE AVAILABLE: | ||||
| 5P-5622 | WIRE (10 gauge) | |||
| 5P-5621 D | WIRE (12 gauge) | |||
| 5P-5624 | WIRE (14 gauge) | |||
| D | ORDER BY THE METER | |||
#HEBP11620172
8P-4700: HARNESS AS
8P4700 HARNESS ASSEMBLY
Part of 8P4711 Battery and Wiring Group shown on Page 70
Part of 8P4711 Battery and Wiring Group shown on Page 70
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6K-9704 | [1] | TERMINAL | |
| 2. | 2L-8065 C | [1] | TERMINAL | |
| 3. | 4L-3916 | [1] | TERMINAL | |
| 4. | 2L-8066 C | [3] | TERMINAL | |
| 5. | 2L-8049 | [2] | TERMINAL | |
| 6. | 2L-8076 | [1] | TERMINAL | |
| THE FOLLOWING WIRES ARE AVAILABLE: | ||||
| 5P-5622 D | WIRE (10 gauge) | |||
| 5P-5621 D | WIRE (12 gauge) | |||
| 5P-5624 D | WIRE (14 gauge) | |||
| C | INDICATES CHANGE | |||
| D | ORDER BY THE METER | |||
#HEBP11620173
7N-0718: SWITCH AS-DISCONNECT
7N718 DISCONNECT SWITCH ASSEMBLY
Part of 8P4711 Battery and Wiring Group shown on Page 69
Part of 8P4711 Battery and Wiring Group shown on Page 69
#HEBP11620174
5S-8501: GLOW PLUG GP
5S8501 GLOW PLUG GROUP
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS#HEBP11620175
6N-5468: ALTERNATOR GP-CHARGING
6N5468 ALTERNATOR GROUP-24 Volt, 35 Ampere
6N9294 Alternator parts are shown on Pages 76 and 77. Note: 7M4707 Vee Belt Set,
includes 2 belts, is used without Sound Suppression and 7M185 Vee Belt Set, includes
2 belts, is used with Sound Suppression
6N9294 Alternator parts are shown on Pages 76 and 77. Note: 7M4707 Vee Belt Set,
includes 2 belts, is used without Sound Suppression and 7M185 Vee Belt Set, includes
2 belts, is used with Sound Suppression
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-4146 | [1] | WIRE AS | |
| 5P-5622 D | WIRE .16M(6.5IN) | |||
| 2. | 2L-8069 | [1] | TERMINAL (LARGE) | |
| 3. | 2L-8066 | [1] | TERMINAL (SMALL) | |
| 4. | 6N-9294 CRY | [1] | ALTERNATOR GP | |
| 5. | 8S-4183 | [1] | STRAP | |
| 6. | 2S-6735 | [1] | SPACER | |
| 7. | 0S-1585 | [2] | BOLT | |
| 8. | 8M-4791 | [2] | WASHER-HARD | |
| 9. | 9S-6129 | [1] | PULLEY-ALTERNATOR DRIVE | |
| 10. | 9S-1240 | [1] | NUT AS | |
| 11. | 2P-3205 | [1] | BOLT-WASHER HEAD | |
| -OR- | ||||
| 2D-2285 C | [1] | BOLT | ||
| 12. | 7S-6723 | [1] | BRACKET-ALTERNATOR | |
| 13. | 2P-3210 | [1] | BOLT-WASHER HEAD | |
| -OR- | ||||
| 7F-1866 C | [1] | BOLT | ||
| 14. | 1D-4574 | [1] | BOLT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#HEBP11620176
6N-9294: ALTERNATOR GP
6N9294 ALTERNATOR GROUP-24 Volt, 35 Ampere-Part 1-Type 1
Part of 6N5468 Alternator Group shown on Page 75
Part of 6N5468 Alternator Group shown on Page 75
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-6920 | [1] | BEARING | |
| 2. | 7N-7806 | [1] | COIL ASSEM. | |
| 3. | 7N-7804 | [1] | STRATOR ASSEM. | |
| 4. | 7N-7795 | [1] | COLLAR | |
| 5. | 7N-7810 | [1] | FRAME ASSEM. | |
| 6. | 5P-9514 | [1] | BEARING | |
| 7. | 9L-2140 | [1] | PLATE | |
| 8. | 9L-6782 | [1] | SHIELD | |
| 9. | 7N-7800 | [1] | ROTOR ASSEM. | |
| 10. | 2K-4821 | [1] | LOCKNUT | |
| 11. | 7F-7621 | [1] | WASHER | |
| 12. | 9L-6783 | [1] | COLLAR | |
| 13. | 9L-2139 | [1] | WASHER | |
| 14. | 9N-1210 | [1] | FAN ASSEM. | |
| 15. | 7N-9020 | [3] | SCREW ASSEM. | |
| 16. | 9L-2137 | [1] | RETAINER ASSEM. | |
| 17. | 7N-7122 C | [1] | RECTIFIER ASSEM. | |
| 18. | 9S-2396 | [1] | BUSHING | |
| 19. | 9S-2007 | [4] | SCREW | |
| 20. | 7N-7809 | [1] | PLATE | |
| 21. | 7N-7805 C | [1] | HOUSING | |
| 22. | 7N-9024 | [4] | BOLT | |
| C | INDICATES CHANGE | |||
#HEBP11620177
6N-9294: ALTERNATOR GP
6N9294 ALTERNATOR GROUP-24 Volt, 35 Ampere-Part 2-Type 1
Part of 6N5468 Alternator Group shown on Page 75
Part of 6N5468 Alternator Group shown on Page 75
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-7807 | [1] | TERMINAL KIT (output) | |
| (Includes Insulator, Screw, Washers, Lockwasher, Nut, & Adapter) | ||||
| 2. | 7N-7808 | [1] | TERMINAL KIT | |
| (Includes Stud, Bushings, Washers & Nut Assem.) | ||||
| 3. | 9L-6770 | [1] | CAP | |
| 4. | 8N-0740 | [5] | SCREW ASSEM. | |
| 5. | 7N-9022 | [2] | SCREW ASSEM. | |
| 9N-0938 | [2] | WASHER | ||
| 6. | 7N-9023 | [2] | SCREW ASSEM. | |
| 7. | 7N-7799 | [1] | REGULATOR ASSEM. | |
| 8. | 6N-1869 | [4] | NUT ASSEM. | |
| 9. | 7N-7811 | [1] | CONNECTOR | |
| 10. | 7N-9018 | [3] | SCREW ASSEM. | |
| 11. | 9N-1202 | [1] | DIODE ASSEM. | |
| 12. | 7N-7797 | [2] | INSULATOR | |
| 13. | 7N-9021 | [1] | SCREW ASSEM. | |
| 7N-7796 | [1] | BUSHING | ||
| 14. | 7N-7802 | [1] | CAPACITOR ASSEM. | |
| 3N-4082 | [1] | BRACKET | ||
| 15. | 7N-7798 | [1] | CONNECTOR | |
| 16. | 7N-7801 | [1] | CONNECTOR | |
#HEBP11620178
6N-9294: ALTERNATOR GP
6N9294 ALTERNATOR GROUP-24 Volt, 35 Ampere-Type 2
Part of 6N5468 Alternator Group shown on Page 75
Part of 6N5468 Alternator Group shown on Page 75
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS#HEBP11620179
7N-9720: ALTERNATOR GP
7N9720 ALTERNATOR GROUP-24 Volt, 35 Ampere-Type 1
Part of 6N9294 Alternator Group listed on Page 77A
Part of 6N9294 Alternator Group listed on Page 77A
Parts for your D6D TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-7551 | [1] | BEARING | |
| 2. | 9G-7548 | [1] | RING | |
| 3. | 9G-7558 | [1] | COIL AS-FIELD | |
| 4. | 9G-7560 | [1] | ROTOR AS | |
| 5. | 9G-7553 | [1] | RING-COVER | |
| 6. | 9G-7562 | [1] | COVER AS | |
| 7. | 9G-7567 | [1] | REGULATOR AS | |
| 8. | 9G-7552 | [1] | BEARING | |
| 9. | 9G-7557 | [1] | SCREW AS | |
| 10. | 9G-7568 | [1] | FRAME AS-REAR | |
| 11. | 9G-7563 | [1] | DIODE AS | |
| 12. | 9G-7561 | [1] | STATOR AS | |
| 13. | 9G-7566 | [1] | FRAME-DRIVE END | |
| 14. | 9G-7564 | [1] | FAN | |
| 15. | 9G-7549 | [1] | SPACER | |
| 16. | 2K-4821 | [1] | LOCKNUT | |
| 17. | 3T-5962 C | [1] | PLATE-IDENTIFICATION | |
| 18. | 2H-3880 C | [2] | SCREW-DRIVE | |
| 19. | 3B-4510 C | [1] | LOCKWASHER | |
| 20. | 1B-8705 C | [1] | KEY-WOODRUFF | |
| THE FOLLOWING REPAIR | ||||
| KITS ARE AVAILABLE: | ||||
| 9G-7554 | [1] | KIT-TERMINAL GROUND | ||
| (INCL NUTS AND | ||||
| LOCKWASHERS) | ||||
| 9G-7555 | [1] | KIT-TERMINAL OUTPUT | ||
| (INCL NUTS, WASHERS | ||||
| AND BUSHINGS) | ||||
| 9G-7556 | [1] | KIT-CAPACITOR | ||
| (INCL CAPACITOR, | ||||
| SCREW, LOCKWASHER | ||||
| AND WASHER) | ||||
| 9G-7559 | [1] | KIT-TERMINAL RELAY | ||
| (INCL SPLICE,TUBE, | ||||
| NUT, TERMINAL, | ||||
| LOCKWASHER, WASHERS | ||||
| AND BUSHING) | ||||
| 9G-7565 | [1] | KIT-TERMINAL REGULATOR | ||
| (INCL NUTS, LOCKWASHERS, | ||||
| WASHERS & BUSHING) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 9G3 And 9G4 Battery Terminal Covers{1401}
Installation Of 9G3 And 9G4 Battery Terminal Covers{1401}
Installation Of 9G3 And 9G4 Battery Terminal Covers{1401}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
1979/01/29
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
1989/05/01
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
2000/04/10
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}


