AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5M7751 FINAL DRIVE GROUP-Upper Half Serial No. 20X1471 to 20X2041 inclusive D6D TRACK-TYPE TRACTOR


POWER TRAIN
DRIVE GP-FINAL
STEERING AND BRAKING SYSTEM
CLUTCH & BRAKE GP-STEERING

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 20X
 D6D TRACTOR / POWER SHIFT / 20X00001-03041 (MACHINE) POWERED BY 3306 ENGINE HEBP1162 D6D 20X   (1977)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
 

#HEBP11620280
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Upper Half
Serial No. 20X1471 to 20X2041 inclusive
c222467 HEBP1162
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING (rubber)  
    (2 in each 5P7143 Seal Group)
  3P-7236 [2] GASKET  
  2J-5815 [2] NUT  
  5P-9177 C [4] INNER RACE  
  3P-6317 [2] LOCK  
  7H-2069 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  5P-9176 C [4] BEARING  
  0S-1585 [12] BOLT (1 75" LONG)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM (120 TEETH)  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  9S-8669 [2] INNER RACE  
  6B-5067 [2] OUTER RACE AND ROLLER ASSEM.  
  [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  5S-0192 [2] PINION (12 TEETH)  
    USE 7M7260 GASKET SOLUTION
  2P-3423 [2] PINION (10 TEETH)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (right hand)  
  9P-0567 [1] CASE (left hand)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  2P-3421 [2] RETAINER  
  2P-3422 [2] GEAR (38 TEETH)  
  C   INDICATES CHANGE
 

#HEBP11620281
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half
Serial No. 20X1471 to 20X2041 inclusive
8P8914 Segmented Sprocket parts are shown on Page 121
c220647 HEBP1162
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 Teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    -OR-
  5P-0374 L [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  5M-6630 [2] CAGE  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  1F-1006 [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [2] CUP  
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  1A-7486 [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 [2] HOLDER ASSEM.  
  5M-6632 [2] GASKET  
  7B-3235 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  L   NOT PART OF FINAL DRIVE AND WH
 

#HEBP11620282
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Upper Half
Serial No. 20X2042 to 20X2553 inclusive
c176947 HEBP1162
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING (rubber)  
    (2 in each 5P7143 Seal Group)
  3P-7236 [2] GASKET  
  6V-0530 C [2] NUT  
  5P-9177 [4] INNER RACE  
  7G-6986 C [2] LOCK  
  0S-1583 C [4] BOLT  
  5P-8248 C [4] WASHER  
  5P-9176 [4] BEARING  
  0S-1585 [12] BOLT (1 75" LONG)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM (120 TEETH)  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  6V-1014 C [2] INNER RACE  
  6V-1013 C [2] OUTER RACE AND ROLLER ASSEM.  
  [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  7G-5323 C [2] PINION (12 TEETH)  
    USE 7M7260 GASKET SOLUTION
  2P-3423 [2] PINION (10 TEETH)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (right hand)  
  9P-0567 [1] CASE (left hand)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  2P-3421 [2] RETAINER  
  2P-3422 [2] GEAR (38 TEETH)  
  C   INDICATES CHANGE
 

#HEBP11620283
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half
Serial No. 20X2042 to 20X2553 inclusive
8P8914 Segmented Sprocket parts are shown on Page 121
c176948 HEBP1162
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 Teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    -OR-
  5P-0374 L [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  7G-6042 C [2] CAGE ASSEM.  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  8M-6521 C [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [1] CUP  
    (1 in each 7G6042 Assem.)
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  7F-2339 C [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 [2] HOLDER ASSEM.  
  5M-6632 [2] GASKET  
  7B-3235 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  L   NOT PART OF FINAL DRIVE AND WH
  C   INDICATES CHANGE
 

#HEBP11620284
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Upper Half
Serial No. 20X2554-Up
c232018 HEBP1162
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING (rubber)  
    (2 in each 5P7143 Seal Group)
  3P-7236 [2] GASKET  
  6V-0530 [2] NUT  
  5P-9177 [4] INNER RACE  
  7G-6986 [2] LOCK  
  0S-1583 [4] BOLT  
  5P-8248 [4] WASHER  
  5P-9176 [4] BEARING  
  0S-1585 [12] BOLT (1 75" LONG)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM (120 TEETH)  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  6V-1014 [2] INNER RACE  
  6V-1013 [2] OUTER RACE AND ROLLER ASSEM.  
  [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  9P-9362 C [2] PINION (11 TEETH)  
    USE 7M7260 GASKET SOLUTION
  9P-9363 C [2] PINION (9 TEETH)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (right hand)  
  9P-0567 [1] CASE (left hand)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  2P-3421 [2] RETAINER  
  9P-9360 C [2] GEAR (35 TEETH)  
  C   INDICATES CHANGE
 

#HEBP11620285
 

5M-7751: FINAL DRIVE GP

5M7751 FINAL DRIVE GROUP-Lower Half
Serial No. 20X2554-Up
8P8914 Segmented Sprocket parts are shown on Page 121
c232019 HEBP1162
5M7751 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9P-9361 C [2] GEAR (46 Teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    -OR-
  5P-0374 L [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  7G-6042 [2] CAGE ASSEM.  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  8M-6521 [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [2] CUP  
    (1 in each 7G6042 Assem.)
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  7F-2339 [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 [2] HOLDER ASSEM.  
  5M-6632 [2] GASKET  
  7B-3235 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  L   NOT PART OF FINAL DRIVE AND WH
 

#HEBP11620286
 

8P-4366: CONTROL GP-STEERING CLUTCH

8P4366 STEERING CLUTCH CONTROL GROUP-Part 1
Serial No. 20X1 to 20X1814 inclusive
c214564 HEBP1162
8P4366 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0829 [2] HANDLE  
2. 8P-3409 [2] BRACKET ASSEM.  
    (Each Includes)
  9F-2978 [2] NUT  
3. 1P-2878 [4] ROLLER  
4. 8P-3410 [2] ROD  
5. 9S-1354 [2] NUT  
6. 4K-5563 [2] END  
7. 9S-1315 [2] PIN  
  3B-4617 [2] COTTER PIN  
8. 9M-5884 [2] BUMPER  
9. 1M-1341 [2] ROD END  
10. 8P-2971 [2] ROD  
11. 5B-9079 [4] NUT  
12. 2K-0400 [2] END  
13. 1B-0676 C [8] PIN  
14. 3B-4615 C [12] COTTER PIN  
15. 3D-8525 [1] LEVER  
16. 1B-8706 [2] KEY  
17. 8M-4990 [1] SEAL  
18. 1S-0004 [1] SEAL  
19. 0S-1588 [2] BOLT  
20. 8P-3205 [1] LEVER  
21. 8P-3262 [1] LEVER (R.H.)  
  8P-3261 [1] LEVER (L.H.)  
  6K-8088 [4] BEARING  
22. 9S-1328 [4] WASHER  
  8P-9821 [4] WASHER (spring)  
23. 1A-8827 [4] PIN  
24. 0T-0102 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  C   INDICATES CHANGE
 

#HEBP11620287
 

8P-4366: CONTROL GP-STEERING CLUTCH

8P4366 STEERING CLUTCH CONTROL GROUP-Part 2
Serial No. 20X1 to 20X1814 inclusive
8P5199 Valve parts are shown on Page 132
c214565 HEBP1162
8P4366 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-5199 Y [1] VALVE GROUP  
    (Separate Illustration)
2. 1M-1341 [2] END  
3. 8P-2519 [1] ROD  
4. 5B-9079 [4] NUT  
5. 1A-9252 [2] END  
6. 8P-2506 [1] BELLCRANK (L.H.)  
7. 6K-8088 [4] BEARING  
8. 8P-2505 [1] BELLCRANK (R.H.)  
9. 8P-2517 [1] ROD  
10. 8M-4445 C [2] SEAL  
11. 1A-2029 [2] BOLT  
12. 3B-4506 [10] LOCKWASHER  
13. 8M-4446 [2] SEAL  
14. 2S-4301 [1] TUBE ASSEM.  
15. 0S-1571 [4] BOLT  
16. 5M-6214 [2] PLUG  
17. 3S-2061 [1] ELBOW  
18. 8M-4987 [2] SEAL  
19. 3S-2062 [1] ELBOW  
20. 2S-4302 [1] TUBE ASSEM.  
21. 0L-2070 [2] BOLT  
22. 0L-1143 [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP11620288
 

8P-4366: CONTROL GP-STEERING CLUTCH

8P4366 STEERING CLUTCH CONTROL GROUP -Part 1
Serial No. 20X1815-Up
c175364 HEBP1162
8P4366 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0829 [2] HANDLE  
2. 8P-3409 [2] BRACKET ASSEM.  
    (Each Includes)
  9F-2978 [2] NUT  
3. 1P-2878 [4] ROLLER  
4. 8P-3410 [2] ROD  
5. 9S-1354 [2] NUT  
6. 4K-5563 [2] END  
7. 7H-9397 C [2] PIN 3. 96 cm(1. 56 in.)  
  1H-1200 C [2] PIN 3. 17 cm(1. 25 in.)  
8. 9M-5884 [2] BUMPER  
9. 1M-1341 [2] ROD END  
10. 8P-2971 [2] ROD  
11. 5B-9079 [4] NUT  
12. 2K-0400 [2] END  
13. 1B-0676 [8] PIN  
14. 3B-4615 [12] COTTER PIN  
15. 3D-8525 [1] LEVER  
16. 1B-8706 [2] KEY  
17. 8M-4990 [1] SEAL  
18. 1S-0004 C [2] SEAL  
19. 0S-1588 [2] BOLT  
20. 8P-3205 [1] LEVER  
21. 8P-3262 [1] LEVER (R.H.)  
  8P-3261 [1] LEVER (L.H.)  
  6K-8088 [4] BEARING  
22. 9S-1328 [4] WASHER  
  8P-9821 [4] WASHER (spring)  
23. 1A-8827 [4] PIN  
24. 0T-0102 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  C   INDICATES CHANGE
 

#HEBP11620289
 

8P-4366: CONTROL GP-STEERING CLUTCH

8P4366 STEERING CLUTCH CONTROL GROUP-Part 2
Serial No. 20X1815-Up. 8P5199 Valve parts are shown on Page 132
c175365 HEBP1162
8P4366 CONTROL GP-STEERING CLUTCH Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-5199 Y [1] VALVE GROUP  
    (Separate Illustration)
2. 1M-1341 [2] END  
3. 8P-2519 [1] ROD  
4. 5B-9079 [4] NUT  
5. 1A-9252 [2] END  
6. 8P-2506 [1] BELLCRANK (L.H.)  
7. 6K-8088 [4] BEARING  
8. 8P-2505 [1] BELLCRANK (R.H.)  
9. 8P-2517 [1] ROD  
10. 8M-4445 [2] SEAL  
11. 1A-2029 [2] BOLT  
12. 3B-4506 C [12] LOCKWASHER  
13. 8M-4446 [2] SEAL  
14. 2S-4301 [1] TUBE ASSEM.  
15. 0S-1571 [4] BOLT  
16. 5M-6214 [2] PLUG  
17. 3P-6187 C [1] ELBOW  
18. 8M-4987 [2] SEAL  
19. 3P-6188 C [1] ELBOW  
20. 2S-4302 [1] TUBE ASSEM.  
21. 0L-2070 [2] BOLT  
22. 0L-1143 [2] BOLT  
23. 0L-1352 C [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Adjustment For Final Drive Bearings
D6D TRACTOR POWER TRAIN
Final Drives<BR> (D6D Tractors, Serial Nos. 3X, 4X, 19X, 20X, 30X, 31X, 74W, 75W, 6HC)
D6D TRACTOR POWER TRAIN
Final Drives<BR> (D6D Low Ground Pressure Tractors, Serial Nos. 6X, 32X, 33X)
D6D TRACTOR POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Adjustment For Final Drive Bearings
D6D TRACTOR POWER TRAIN
Final Drive Cases
D6D TRACTOR POWER TRAIN
Final Drive Gears, Idler Pinions And Bearings
D6D TRACTOR POWER TRAIN
Final Drive Pinion Shafts And Flanges
D6D TRACTOR POWER TRAIN
Duo-Cone Seals
D6D TRACTOR POWER TRAIN
Service Magazine
New 6V3094 Adapter Is Available For Installation Of Final Drive Pinion Flanges{0620,4057}
1980/06/16
Stronger Gears Now Used In Final Drive Groups{4055,4091}
1980/06/23
Increased Force Used For Installation Of Steering Clutch Flange On Final Drive Input Pinion To Prevent Oil Leakage{4057,4091,4052}
1981/02/23
Do Not Use 1P5590 Adapter During Sprocket Installation{4164}
1984/01/09
Thicker Nut Used On The End Of The Final Drive Axle Shaft {4058}
1984/06/25
Improved Lubrication Of Final Drive Bearing{4059,4070}
1984/10/15
New 6V3094 Adapter Is Available For Installation Of Final Drive Pinion Flanges {0620,4057}
1985/01/14
Thicker Nut Used On The End Of The Final Drive Axle Shaft{4058}
1985/02/04
Improved Seal For Oil Compartment For Final Drive Oscillation Bearing{4066}
1987/05/04
Higher Capacity Bearing Used On Final Drive Pinion; Gives Increased Service Life{4091}
1978/02/27
The Special Breathers For The Bevel Gear Case And The Final Drive Cases Have Been Removed-A Common Breather For These Systems Is Now Located On The Transmission Oil Filler Spout{4059,4070,3179,3067}
1978/04/24
Higher Capacity Bearing Used On Final Drive Pinion{4091}
1978/10/30
Hardened Dowels Now Used In Brake Hydraulic Mechanism Group{4059,4115}
1979/03/26
The 6B5067 Race And Roller Assembly, Used In Final Drive Group, Can Be Either Of Two Designs{4050,4091}
1979/04/30
Torque Turn Adjustment Of Final Drive Hub Bearings{0654,4050}
1979/05/07
New Final Drive Bearing And Race Have Longer Service Life{4050,4091}
1979/06/04
Sawcut Removed From Bearing Holder Assembly In Final Drive Group{4066}
1979/10/22
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D6D :

FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
SPROCKET GP-SEGMENTED
8P-8914 SPROCKET GP-SEGMENTED
PUMP GP-OIL
3P-6816 PUMP GP-OIL
FILTER GP
3S-1741 FILTER GP
SCREEN GP-MAGNETIC
9M-8669 SCREEN GP-MAGNETIC
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
FINAL DRIVE GP
5M-7751 FINAL DRIVE GP
CONTROL GP-STEERING CLUTCH
8P-4366 CONTROL GP-STEERING CLUTCH
CONTROL GP-STEERING CLUTCH
8P-4366 CONTROL GP-STEERING CLUTCH
CONTROL GP-STEERING CLUTCH
8P-4366 CONTROL GP-STEERING CLUTCH

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.