AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9S6590 OIL PUMP GROUP Part of 5M5070 Flywheel Clutch Group shown on Page 98 D6D TRACK-TYPE TRACTOR


POWER TRAIN
PUMP GP
OPERATOR STATION
CONTROL GP-GEARSHIFT
POWER TRAIN
CLUTCH GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 19X
 D6D TRACTOR / DIRECT DRIVE / 19X00001-00766 (MACHINE) POWERED BY 3306 ENGINE HEBP1163 D6D 19X   (1977)

POWER TRAIN

PUMP GP
OIL PUMP GROUP
9S-6590 OIL PUMP GROUP
OIL PUMP GROUP
3P-6814 OIL PUMP GROUP
 

#HEBP11630200
 

9S-6590: OIL PUMP GROUP

9S6590 OIL PUMP GROUP
Part of 5M5070 Flywheel Clutch Group shown on Page 98
c108328 HEBP1163
9S6590 OIL PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5S-5736 [ 1] COVER ASSEM.  
2. 1H-3135 [ 1] BUSHING  
    (Part of 5S5736 Assem.)
3. 9S-6588 [ 1] BODY ASSEM.  
4. 2A-3630 [ 2] DOWEL  
5. 1H-7481 [ 1] SHAFT  
6. 9S-6586 [ 1] GEAR (10 Teeth-Drive)  
7. 1D-4538 [ 6] BOLT  
  2A-5328 [ 6] LOCK  
8. 3S-8800 [ 1] GEAR (25 Teeth)  
9. 5H-2532 [ 1] KEY  
10. 1H-8399 [ 1] RING  
11. 9S-6585 [ 1] GEAR (10 Teeth-Idler)  
 

#HEBP11630201
 

8P-4159: GEARSHIFT CONTROL GROUP

8P4159 GEARSHIFT CONTROL GROUP -- Part 1
Serial No. 19X1 to 19X474 inclusive
c207173 HEBP1163
8P4159 GEARSHIFT CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3393 [1] COVER ASSEM.  
    (Includes)
  5P-7246 D SEAL 1.7 m(66.93 in.)  
2. 0L-1351 [7] BOLT  
3. 4B-4278 [4] WASHER  
4. 9B-7237 [1] BOLT  
5. 8P-3330 [1] LEVER  
6. 0L-0829 [1] HANDLE  
7. 2A-1736 [1] HANDLE  
8. 8P-4386 [1] LEVER ASSEM.  
    (Includes)
  3B-5822 [1] PIN  
9. 3P-9934 [1] BOOT  
10. 8P-3127 [1] BRACKET  
11. 8P-3331 [1] SEAL  
12. 0S-1588 [5] BOLT  
13. 3P-9935 [1] RETAINER  
14. 0S-1615 [8] BOLT  
  4B-4276 [8] WASHER  
15. 0L-0887 [1] COVER  
16. 0L-1045 [1] SPRING  
17. 3B-4618 [1] COTTER PIN  
18. 0L-0888 [1] COVER  
  0L-0974 [1] PACKING  
19. 1A-5592 [1] COVER  
20. 7D-7204 [2] PLATE  
  3D-8799 [3] GASKET  
21. 1A-6775 [1] RING  
22. 0V-0294 [2] SPRING  
23. 7M-0858 [1] GATE  
24. 1P-1551 [1] HOUSING ASSEM.  
    (Includes)
  0L-1026 [1] PLUG  
  7M-1808 [1] DOWEL  
  7M-0839 [1] SHAFT  
25. 1M-4459 [1] BEARING  
26. 5H-3895 [1] BEARING  
27. 7M-1765 [1] PLATE  
  7M-1766 [2] GASKET  
28. 1P-1612 [1] FORK ASSEM.  
29. 6P-9086 [1] FORK  
30. 7M-0862 [1] FORK ASSEM.  
31. 6F-0542 [4] SCREW  
32. 7M-0859 [1] FORK ASSEM.  
33. 5P-6628 D WIRE .8 m(31.50 in.)  
34. 7M-0857 [1] SHAFT  
35. 1A-1898 [1] WASHER  
36. 3B-4506 [4] LOCKWASHER  
37. 5H-5693 [1] SEAL  
38. 1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
39. 8P-8041 [1] LEVER  
40. 7M-1773 [1] GASKET  
  D   ORDER BY THE METER
 

#HEBP11630202
 

8P-4159: GEARSHIFT CONTROL GROUP

8P4159 GEARSHIFT CONTROL GROUP -- Part 2
Serial No. 19X1 to 19X474 inclusive
c207174 HEBP1163
8P4159 GEARSHIFT CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [3] BOLT  
2. 3B-4506 [26] LOCKWASHER  
3. 4B-4278 [5] WASHER  
4. 0S-1619 [2] BOLT  
5. 9S-6465 [1] BEARING  
6. 6D-3787 [1] BEARING  
7. 8P-3128 [1] SHAFT  
  1B-8706 [2] KEY  
8. 2S-3440 [1] CLAMP  
9. 8B-6014 [1] BOOT  
10. 1A-2029 [8] BOLT  
11. 3B-4619 [1] COTTER PIN  
  1K-4709 [1] WASHER  
  1F-2642 [1] BEARING  
12. 7B-8583 [2] SCREW  
  0T-0495 [2] LOCK  
13. 7M-0846 [1] LEVER  
14. 0L-1143 [6] BOLT  
15. 8B-5814 [1] LEVER  
16. 9M-7432 [1] SEAL  
17. 7M-1772 [1] SHAFT  
18. 7B-8207 [4] PLUNGER  
19. 9M-1338 [1] PLATE  
20. 3B-0623 [1] PLUG  
21. 6B-6479 [4] SPRING  
22. 7M-1767 [1] HOUSING  
23. 0L-2070 [2] BOLT  
24. 1B-4203 [7] NUT  
25. 7M-0853 [1] SHAFT  
26. 7M-0854 [1] SHAFT  
27. 7M-0855 [1] SHAFT  
28. 7M-0840 [2] COVER  
  7M-0841 [2] GASKET  
29. 7M-0856 [1] SHAFT  
30. 7M-0850 [1] PLATE ASSEM.  
31. 0S-0509 [4] BOLT  
  2A-2376 [2] LOCK  
32. 7M-0845 [1] PIN  
33. 7M-0847 [1] LEVER  
34. 1B-8716 [2] KEY  
35. 0S-1591 [1] BOLT  
36. 8P-8987 [1] LEVER  
37. 1A-1460 [1] BOLT  
38. 8P-3926 [1] ROD ASSEM.  
    (Includes)
39. 1B-4430 [2] NUT  
40. 5J-0557 [2] END  
41. 7B-8688 [1] PIN  
  1B-4442 [1] NUT  
  3B-4610 [1] COTTER PIN  
 

#HEBP11630203
 

8P-4159: GEARSHIFT CONTROL GROUP

8P4159 GEARSHIFT CONTROL GROUP -- Part 1
Serial No. 19X475 to 19X530 inclusive
c168607 HEBP1163
8P4159 GEARSHIFT CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3393 [1] COVER ASSEM.  
    (Includes)
  5P-7246 CD SEAL 1.4 m(55.12 in.)  
2. 0L-1351 C [6] BOLT  
3. 4B-4278 C [6] WASHER  
4. 9B-7237 [1] BOLT  
5. 8P-3330 [1] LEVER  
6. 0L-0829 [1] HANDLE  
7. 2A-1736 [1] HANDLE  
8. 8P-4386 [1] LEVER ASSEM.  
    (Includes)
  3B-5822 [1] PIN  
9. 3P-9934 [1] BOOT  
10. 8P-3127 [1] BRACKET  
11. 8P-3331 [1] SEAL  
12. 0S-1588 [5] BOLT  
13. 3P-9935 [1] RETAINER  
14. 0S-1615 [8] BOLT  
  4B-4276 [8] WASHER  
15. 0L-0887 [1] COVER  
16. 0L-1045 [1] SPRING  
17. 3B-4618 [1] COTTER PIN  
18. 0L-0888 [1] COVER  
  0L-0974 [1] PACKING  
19. 1A-5592 [1] COVER  
20. 7D-7204 [2] PLATE  
  3D-8799 [3] GASKET  
21. 1A-6775 [1] RING  
22. 0V-0294 [2] SPRING  
23. 7M-0858 [1] GATE  
24. 1P-1551 [1] HOUSING ASSEM.  
    (Includes)
  0L-1026 [1] PLUG  
  7M-1808 [1] DOWEL  
  7M-0839 [1] SHAFT  
25. 1M-4459 [1] BEARING  
26. 5H-3895 [1] BEARING  
27. 7M-1765 [1] PLATE  
  7M-1766 [2] GASKET  
28. 1P-1612 [1] FORK ASSEM.  
29. 6P-9086 [1] FORK  
30. 7M-0862 [1] FORK ASSEM.  
31. 6F-0542 [4] SCREW  
32. 7M-0859 [1] FORK ASSEM.  
33. 5P-6628 D WIRE .8 m(31.50 in.)  
34. 7M-0857 [1] SHAFT  
35. 1A-1898 [1] WASHER  
36. 3B-4506 [4] LOCKWASHER  
37. 5H-5693 [1] SEAL  
38. 1B-4205 [2] NUT  
  3B-4508 [2] LOCKWASHER  
39. 8P-8041 [1] LEVER  
40. 7M-1773 [1] GASKET  
  C   INDICATES CHANGE
  D   ORDER BY THE METER
 

#HEBP11630204
 

8P-4159: GEARSHIFT CONTROL GROUP

8P4159 GEARSHIFT CONTROL GROUP -- Part 2
Serial No. 19X475 to 19X530 inclusive
c168608 HEBP1163
8P4159 GEARSHIFT CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 C [4] BOLT  
2. 3B-4506 C [27] LOCKWASHER  
3. 4B-4278 C [4] WASHER  
4. 2B-0947 C [1] BOLT  
5. 9S-6465 [1] BEARING  
6. 6D-3787 [1] BEARING  
7. 8P-3128 [1] SHAFT  
  1B-8706 [2] KEY  
8. 2S-3440 [1] CLAMP  
9. 8B-6014 [1] BOOT  
10. 1A-2029 [8] BOLT  
11. 3B-4619 [1] COTTER PIN  
  1K-4709 [1] WASHER  
  1F-2642 [1] BEARING  
12. 7B-8583 [2] SCREW  
  0T-0495 [2] LOCK  
13. 7M-0846 [1] LEVER  
14. 0L-1143 [6] BOLT  
15. 8B-5814 [1] LEVER  
16. 9M-7432 [1] SEAL  
17. 7M-1772 [1] SHAFT  
18. 7B-8207 [4] PLUNGER  
19. 9M-1338 [1] PLATE  
20. 3B-0623 [1] PLUG  
21. 6B-6479 [4] SPRING  
22. 7M-1767 [1] HOUSING  
23. 0L-2070 [2] BOLT  
24. 1B-4203 [7] NUT  
25. 7M-0853 [1] SHAFT  
26. 7M-0854 [1] SHAFT  
27. 7M-0855 [1] SHAFT  
28. 7M-0840 [2] COVER  
  7M-0841 [2] GASKET  
29. 7M-0856 [1] SHAFT  
30. 7M-0850 [1] PLATE ASSEM.  
31. 0S-0509 [4] BOLT  
  2A-2376 [2] LOCK  
32. 7M-0845 [1] PIN  
33. 7M-0847 [1] LEVER  
34. 1B-8716 [2] KEY  
35. 0S-1591 [1] BOLT  
36. 8P-8987 [1] LEVER  
37. 8P-3926 [1] ROD ASSEM.  
    (Includes)
38. 1B-4430 [2] NUT  
39. 5J-0557 [2] END  
40. 7B-8688 [1] PIN  
  1B-4442 [1] NUT  
  3B-4610 [1] COTTER PIN  
  C   INDICATES CHANGE
 

#HEBP11630205
 

8P-4159: GEARSHIFT CONTROL GROUP

8P4159 GEARSHIFT CONTROL GROUP -- Part 1
Serial No. 19X531 - Up
c230395 HEBP1163
8P4159 GEARSHIFT CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7G-7286 C [1] COVER ASSEM.  
  5P-7246 D SEAL 1.4 m(55.12 in.)  
2. 0L-1351 [6] BOLT  
3. 4B-4278 [6] WASHER  
4. 0S-1571 C [1] BOLT  
5. 7G-2308 [1] LEVER  
6. 0L-0829 [1] HANDLE  
7. 2A-1736 [1] HANDLE  
8. 8P-4386 [1] LEVER ASSEM.  
  3B-5822 [1] PIN  
9. 8P-3083 C [1] BOOT  
10. 8P-3127 [1] BRACKET  
11. 8P-3331 [1] SEAL  
12. 0S-1588 [5] BOLT  
13. 0S-1616 [8] BOLT  
  4B-4276 [8] WASHER  
14. 3P-9935 [1] RETAINER  
15. 0L-0887 [1] COVER  
16. 0L-1045 [1] SPRING  
17. 3B-4618 [1] COTTER PIN  
18. 0L-0888 [1] COVER  
  0L-0974 [1] PACKING  
19. 1A-5592 [1] COVER  
20. 7D-7204 [2] PLATE  
  3D-8799 [3] GASKET  
21. 1A-6775 [1] RING  
22. 0V-0294 [2] SPRING  
23. 7M-1765 [1] PLATE  
  7M-1766 [2] GASKET  
24. 1P-1551 [1] HOUSING ASSEM.  
  0L-1026 [1] PLUG  
  7M-1808 [1] DOWEL  
  7M-0839 [1] SHAFT  
25. 1M-4459 [1] BEARING  
26. 5H-3895 [1] BEARING  
27. 7M-0858 [1] GATE  
28. 1P-1612 [1] FORK ASSEM.  
29. 6P-9086 [1] FORK  
30. 7M-0862 [1] FORK ASSEM.  
31. 6F-0542 [4] SCREW  
32. 7M-0859 [1] FORK ASSEM.  
33. 5P-6628 D WIRE .8 m(31.50 in.)  
34. 7M-0857 [1] SHAFT  
35. 1A-1898 [1] WASHER  
36. 3B-4506 [4] LOCKWASHER  
37. 5H-5693 [1] SEAL  
38. 1D-4717 C [1] NUT  
  5M-2894 C [1] WASHER  
39. 7G-7425 C [1] LEVER  
40. 7M-1773 [1] GASKET  
41. 5D-1026 [1] CLAMP  
42. 0S-1585 C [1] BOLT  
  5P-8245 C [1] WASHER  
  C   INDICATES CHANGE
  D   ORDER BY THE METER
 

#HEBP11630206
 

8P-4159: GEARSHIFT CONTROL GROUP

8P4159 GEARSHIFT CONTROL GROUP -- Part 2
Serial No. 19X531 - Up
c180412 HEBP1163
8P4159 GEARSHIFT CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [4] BOLT  
2. 3B-4506 [27] LOCKWASHER  
3. 4B-4278 [4] WASHER  
4. 1A-1460 C [2] BOLT  
5. 9S-6465 C [1] BEARING  
6. 6D-3787 C [3] BEARING  
7. 8P-3128 [1] SHAFT  
  1B-8706 [2] KEY  
8. 2S-3440 [1] CLAMP  
9. 8B-6014 [1] BOOT  
10. 1A-2029 [8] BOLT  
11. 3B-4619 [1] COTTER PIN  
  1K-4709 [1] WASHER  
  1F-2642 [1] BEARING  
12. 7B-8583 [2] SCREW  
  0T-0495 [2] LOCK  
13. 7M-0846 [1] LEVER  
14. 0L-1143 [6] BOLT  
15. 8B-5814 [1] LEVER  
16. 9M-7432 [1] SEAL  
17. 7M-1772 [1] SHAFT  
18. 7B-8207 [4] PLUNGER  
19. 9M-1338 [1] PLATE  
20. 3B-0623 [1] PLUG  
21. 6B-6479 [4] SPRING  
22. 7M-1767 [1] HOUSING  
23. 0L-2070 [2] BOLT 5.71 cm(2.25 in.) long  
    - OR -
  0T-0573 C [2] BOLT 6.98 cm(2.75 in.) long  
24. 1B-4203 [7] NUT  
25. 7M-0853 [1] SHAFT  
26. 7M-0854 [1] SHAFT  
27. 7M-0855 [1] SHAFT  
28. 7M-0840 [2] COVER  
  7M-0841 [2] GASKET  
29. 7M-0856 [1] SHAFT  
30. 7M-0850 [1] PLATE ASSEM.  
31. 0S-0509 [4] BOLT  
  2A-2376 [2] LOCK  
32. 7M-0845 [1] PIN  
33. 7M-0847 [1] LEVER  
34. 1B-8716 [2] KEY  
35. 0S-1591 [1] BOLT  
36. 7G-7420 C [1] LEVER  
37. 7G-7421 C [1] ROD  
38. 1B-4430 C [2] NUT  
39. 2M-8340 C [2] END  
40. 7B-8688 [1] PIN  
  1B-4442 [1] NUT  
  3B-4610 [1] COTTER PIN  
41. 1B-4205 [2] NUT  
42. 1D-4719 C [1] NUT  
43. 5P-8245 C [1] WASHER  
44. 2J-5038 C [2] END  
45. 7G-7424 C [1] LEVER ASSEM.  
46. 3B-4629 C [1] COTTER PIN  
47. 2K-3438 C [1] STUD  
48. 0S-0175 C [2] PIN  
49. 3B-4618 C [2] COTTER PIN  
50. 5P-8248 C [1] WASHER  
  C   INDICATES CHANGE
 

#HEBP11630207
 

8P-5366: FLYWHEEL CLUTCH CONTROL GROUP

8P5366 FLYWHEEL CLUTCH CONTROL GROUP
Serial No. 19X1 to 19X677 inclusive
c207175 HEBP1163
8P5366 FLYWHEEL CLUTCH CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4879 [2] BOLT  
2. 3B-4506 [15] LOCKWASHER  
3. 4B-4278 [12] WASHER  
4. 4B-1280 [4] SCREW  
5. 0L-0829 [1] HANDLE  
6. 8P-3198 [1] LEVER  
7. 0S-1588 [1] BOLT  
8. 8P-3337 [1] COVER  
9. 0S-0509 [3] BOLT  
10. 8P-7624 [1] PLATE  
11. 8P-3338 [1] COVER ASSEM.  
    (Includes)
  5P-5904 D SEAL 1.1m(43.31 in.)  
12. 5P-7246 D SEAL .6 m(23.63 in.)  
13. 8P-3128 [1] SHAFT  
14. 1B-8706 [2] KEY  
15. 1A-2029 [1] BOLT  
16. 8P-3127 [1] BRACKET  
17. 1K-2602 [1] WASHER  
  3B-4629 [1] COTTER PIN  
18. 8P-3200 [1] BELLCRANK  
19. 9S-1315 [1] PIN  
20. 3B-4617 [2] COTTER PIN  
21. 9S-6465 [1] BEARING  
22. 6D-3787 [1] BEARING  
23. 8P-3331 [1] SEAL  
24. 0L-1351 [9] BOLT  
25. 1J-4384 [2] PIN  
26. 3B-4615 [3] COTTER PIN  
27. 7H-0610 [1] SPRING  
  7M-1768 [1] GUIDE  
28. 5M-9989 [1] RETAINER  
29. 7M-0829 [1] ROD ASSEM.  
    (Includes)
  0T-0431 [1] WASHER  
30. 1B-4203 [1] NUT  
31. 1A-9252 [1] ROD END  
32. 6B-7988 [1] PIN  
33. 7B-6059 [1] ROD END  
34. 1S-1353 [1] ROD  
35. 1B-4206 [4] NUT  
36. 9S-1314 [1] ROD END  
37. 8P-3388 [1] BRACKET ASSEM.  
    (Includes)
38. 1M-1917 [1] SHAFT  
39. 7B-3235 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
40. 8S-9092 [2] BOLT  
  1D-4720 [2] NUT  
  3B-4510 [2] LOCKWASHER  
41. 8P-6238 [1] ROD  
42. 2K-5804 [2] ROD END  
43. 8P-3199 [1] LEVER  
44. 0S-1571 [1] BOLT  
  1D-4717 [1] NUT  
45. 6K-8088 [2] BEARING  
  D   ORDER BY THE METER
 

#HEBP11630208
 

8P-5366: FLYWHEEL CLUTCH CONTROL GROUP

8P5366 FLYWHEEL CLUTCH CONTROL GROUP
Serial No. 19X678 to 19X694 inclusive
c232014 HEBP1163
8P5366 FLYWHEEL CLUTCH CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4879 [ 2] BOLT  
2. 3B-4506 C [ 13] LOCKWASHER  
3. 4B-4278 C [ 12] WASHER  
4. 4B-1282 C [ 4] SCREW  
5. 0L-0829 [ 1] HANDLE  
6. 8P-3198 [ 1] LEVER  
7. 3B-1915 C [ 1] BOLT  
8. 8P-3337 [ 1] COVER  
9. 0S-1571 C [ 3] BOLT  
10. 1D-4717 [ 1] NUT  
11. C [ 1] COVER  
12. 0L-1351 C [ 8] BOLT  
13. 7G-3830 C [ 1] SHAFT  
14. 1B-8706 [ 2] KEY  
15. 1A-2029 C [ 1] BOLT  
16. 8P-3127 [ 1] BRACKET  
17. 1K-2602 [ 1] WASHER  
  3B-4629 [ 1] COTTER PIN  
18. 8P-3200 [ 1] BELLCRANK  
19. 9S-1315 [ 1] PIN  
20. 3B-4617 [ 2] COTTER PIN  
21. 9S-6465 [1] BEARING  
22. 6D-3787 [ 1] BEARING  
23. 8P-3331 [ 1] SEAL  
24. 6K-8088 [ 2] BEARING  
25. 1J-4384 [ 2] PIN  
26. 3B-4615 [ 3] COTTER PIN  
27. 7H-0610 [ 1] SPRING  
  7M-1768 [ 1] GUIDE  
28. 5M-9989 [ 1] RETAINER  
29. 7M-0829 [ 1] ROD ASSEM.  
    (Includes)
  0T-0431 [ 1] WASHER  
30. 1B-4203 [ 1] NUT  
31. 1A-9252 [ 1] ROD END  
32. 6B-7988 [ 1] PIN  
33. 7B-6059 [ 1] ROD END  
34. 1S-1353 [ 1] ROD  
35. 1B-4206 [ 4] NUT  
36. 9S-1314 [ 1] ROD END  
37. 8P-3388 [ 1] BRACKET ASSEM.  
    (Includes)
38. 1M-1917 [ 1] SHAFT  
39. 7B-3235 [ 2] BOLT  
  3B-4508 [ 2] LOCKWASHER  
40. 8S-9092 [ 2] BOLT  
  1D-4720 [ 2] NUT  
  3B-4510 [ 2] LOCKWASHER  
41. 8P-6238 [ 1] ROD  
42. 2K-5804 [ 2] ROD END  
43. 8P-3199 [ 1] LEVER  
    INDICATES CHANGE
 

#HEBP11630209
 

8P-5366: FLYWHEEL CLUTCH CONTROL GROUP

8P5366 FLYWHEEL CLUTCH CONTROL GROUP
Serial No. 19X695-Up
c232015 HEBP1163
8P5366 FLYWHEEL CLUTCH CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-4879 [ 2] BOLT  
2. 3B-4506 C [ 8] LOCKWASHER  
3. 4B-4278 C [ 8] WASHER  
4. 4B-1282 [ 4] SCREW  
5. 0L-0829 [ 1] HANDLE  
6. 8P-3198 [ 1] LEVER  
7. 3B-1915 [ 1] BOLT  
8. 8P-3337 [ 1] COVER  
9. 0S-1571 [ 3] BOLT  
10. 1D-4717 [ 1] NUT  
11. 9G-6546 C [ 1] COVER  
12. 0L-1351 C [ 2] BOLT  
13. 7G-3830 [ 1] SHAFT  
14. 1B-8706 [ 2] KEY  
15. 0S-0509 C [ 2] BOLT  
16. 8P-3127 [ 1] BRACKET  
17. 1K-2602 [ 1] WASHER  
  3B-4629 [ 1] COTTER PIN  
18. 8P-3200 [ 1] BELLCRANK  
19. 9S-1315 [ 1] PIN  
20. 3B-4617 [ 2] COTTER PIN  
21. 9S-6465 [ 1] BEARING  
22. 6D-3787 [ 1] BEARING  
23. 8P-3331 [ 1] SEAL  
24. 6K-8088 [ 2] BEARING  
25. 1J-4384 [ 2] PIN  
26. 3B-4615 [ 3] COTTER PIN  
27. 7H-0610 [ 1] SPRING  
  7M-1768 [ 1] GUIDE  
28. 5M-9989 [ 1] RETAINER  
29. 7M-0829 [ 1] ROD ASSEM.  
    (Includes)
  0T-0431 [ 1] WASHER  
30. 1B-4203 [ 1] NUT  
31. 1A-9252 [ 1] ROD END  
32. 6B-7988 [ 1] PIN  
33. 7B-6059 [ 1] ROD END  
34. 1S-1353 [ 1] ROD  
35. 1B-4206 [ 4] NUT  
36. 9S-1314 [ 1] ROD END  
37. 8P-3388 [ 1] BRACKET ASSEM.  
    (Includes)
38. 1M-1917 [ 1] SHAFT  
39. 7B-3235 [ 2] BOLT  
  3B-4508 [ 2] LOCKWASHER  
40. 8S-9092 [ 2] BOLT  
  1D-4720 [ 2] NUT  
  3B-4510 [ 2] LOCKWASHER  
41. 8P-6238 [ 1] ROD  
42. 2K-5804 [ 2] ROD END  
43. 8P-3199 [ 1] LEVER  
    INDICATES CHANGE
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Oil Pump For Transmission<BR> (Power Shift) (3P6816)
D6D TRACTOR POWER TRAIN
Oil Pump For Transmission<BR> (Direct Drive) (3P6814) (3P6816)
D6D TRACTOR POWER TRAIN
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors{5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil Pump
D6D TRACTOR POWER TRAIN
Torque Divider Scavenge Pump (Power Shift)
D6D TRACTOR POWER TRAIN

Caterpillar Parts SIS Catalog D6D :

UNIVERSAL JOINT ASSEMBLY
5M-5073 UNIVERSAL JOINT ASSEMBLY
5M-5070 FLYWHEEL CLUTCH GROUP
5M-5070 FLYWHEEL CLUTCH GROUP
FLYWHEEL CLUTCH GROUP
5M-5070 FLYWHEEL CLUTCH GROUP
2P-1519 TRANSMISSION GROUP
TRANSMISSION GROUP
2P-1519 TRANSMISSION GROUP
BACK-UP WARNING GROUP
8P-7435 BACK-UP WARNING GROUP
BACK-UP WARNING GROUP
8P-7435 BACK-UP WARNING GROUP
GEARSHIFT CONTROL GROUP
8P-4159 GEARSHIFT CONTROL GROUP
8P-4159 GEARSHIFT CONTROL GROUP
GEARSHIFT CONTROL GROUP
8P-4159 GEARSHIFT CONTROL GROUP
8P-4159 GEARSHIFT CONTROL GROUP
GEARSHIFT CONTROL GROUP
8P-4159 GEARSHIFT CONTROL GROUP
8P-4159 GEARSHIFT CONTROL GROUP
FLYWHEEL CLUTCH CONTROL GROUP
8P-5366 FLYWHEEL CLUTCH CONTROL GROUP
FLYWHEEL CLUTCH CONTROL GROUP
8P-5366 FLYWHEEL CLUTCH CONTROL GROUP

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.