AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N9267 CYLINDER BLOCK GROUP ENGINE SERIAL NO. 70V18713 TO 70V19053 INCLUSIVE FIELD REPLACEMENT ORDER 2W6039-PAGE 6.03 245


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP

EXCAVATOR 245 EXCAVATOR 84X
 245 EXCAVATOR 84X00001-UP (MACHINE) POWERED BY 3406 ENGINE HEBP1215 245 84X   (1978)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-2257 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
8N-3148 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
7N-1203 CYLINDER BLOCK GP
 

#HEBP12150010
 

8N-9267: CYLINDER BLOCK GP

8N9267 CYLINDER BLOCK GROUP
ENGINE SERIAL NO. 70V18713 TO 70V19053 INCLUSIVE
FIELD REPLACEMENT ORDER 2W6039-PAGE 6.03
c451925 HEBP1215
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9881 [6] TUBE AS-OIL JET  
2. 9F-2247 [3] PLUG  
3. 7M-7410 B [2] PLUG  
4. 1W-6280 [6] LINER-CYLINDER  
5. 7H-3171 [3] PLUG-PIPE  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 3J-5389 [1] PLUG  
9. 030-7571 [4] BOLT  
10. 4W-8585 C [1] COVER  
11. 7W-0226 C [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 7N-1199 [1] PLATE-BLOCK  
16. 7N-0625 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [1] PLUG-0-RING  
19. 2M-9780 [1] SEAL-O-RING  
20. 3J-5390 [5] PLUG  
21. 4N-9916 [6] BOLT-OIL JET  
22. 4N-0685 [6] BEARING-SLEEVE  
23. 4N-6658 [1] BEARING-SLEEVE  
24. 5M-6214 [1] PLUG-PIPE  
25. 9S-8009 [1] PLUG-O-RING  
26. 4K-1388 [1] SEAL-O-RING  
27. 6V-5121 [18] SEAL-O-RING  
28. 3P-1323 [14] BOLT-BEARING CAP  
29. 9H-1031 [14] WASHER-HARD  
30. 4N-5857 [7] CAP  
31. 9L-5854 [6] BAND-FILLER  
32. 4W-4588 CA SLEEVE-LIFTER BORE  
33. 9S-4190 B [1] PLUG-0-RING  
34. 2M-9780 B [1] SEAL-O-RING  
  5N-0093 AFC [6] INSERT-LINER SEAT  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#HEBP12150011
 

8N-9267: CYLINDER BLOCK GP

8N9267 CYLINDER BLOCK GROUP
ENGINE SERIAL NO. 70V19054 TO 70V19178 INCLUSIVE
FIELD REPLACEMENT ORDER 2W6039-PAGE 6.03
c451959 HEBP1215
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-7496 C [6] TUBE AS-OIL JET  
2. 9F-2247 [3] PLUG  
3. 7M-7410 B [2] PLUG  
4. 1W-6280 [6] LINER-CYLINDER  
5. 7H-3171 [3] PLUG-PIPE  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL-O-RING  
8. 3J-5389 [1] PLUG  
9. 030-7571 [4] BOLT  
10. 4W-8585 [1] COVER  
11. 7W-6081 C [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 7N-1199 [1] PLATE-BLOCK  
16. 7N-0625 [1] GASKET-PLATE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [1] PLUG-0-RING  
19. 2M-9780 [1] SEAL-O-RING  
20. 3J-5390 [5] PLUG  
21. 4N-9916 [6] BOLT-OIL JET  
22. 4N-0685 [6] BEARING-SLEEVE  
23. 4N-6658 [1] BEARING-SLEEVE  
24. 5M-6214 [1] PLUG-PIPE  
25. 9S-8009 [1] PLUG-O-RING  
26. 4K-1388 [1] SEAL-O-RING  
27. 6V-5121 [18] SEAL-O-RING  
28. 3P-1323 [14] BOLT-BEARING CAP  
29. 9H-1031 [14] WASHER-HARD  
30. 4N-5857 [7] CAP  
31. 9L-5854 [6] BAND-FILLER  
32. 4W-4588 A SLEEVE-LIFTER BORE  
33. 9S-4190 B [1] PLUG-0-RING  
34. 2M-9780 B [1] SEAL-O-RING  
  5N-0093 AF [6] INSERT-LINER SEAT  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#HEBP12150012
 

8N-9267: CYLINDER BLOCK GP

8N9267 CYLINDER BLOCK GROUP
ENGINE SERIAL NO. 70V19179-UP
FIELD REPLACEMENT ORDER 2W6039-PAGE 6.03
c333384 HEBP1215
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9881 C [6] TUBE ASSEM.  
2. 9F-2247 [3] PLUG  
3. 7M-7410 B [2] PLUG  
4. 1W-6280 [6] LINER  
5. 7H-3171 [3] PLUG  
6. 1S-9540 [2] DOWEL  
7. 3S-5496 [2] SEAL  
8. 3J-5389 [1] PLUG  
9. 030-7571 [4] BOLT  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 2M-6471 [2] PLUG  
13. 4N-0683 [4] DOWEL  
14. 4N-1650 [2] DOWEL  
15. 7N-1199 [1] PLATE  
16. 7N-0625 [1] GASKET  
17. 8S-9094 [1] PLUG  
18. 9S-4190 [1] PLUG  
19. 2M-9780 [1] SEAL  
20. 3J-5390 [5] PLUG  
21. 4N-9916 [6] BOLT  
22. 4N-0685 [6] BEARING  
23. 4N-6658 [1] BEARING  
24. 5M-6214 [1] PLUG  
25. 9S-8009 [1] PLUG  
26. 4K-1388 [1] SEAL  
27. 6V-5121 [18] SEAL  
28. 3P-1323 [14] BOLT  
29. 9H-1031 [14] WASHER  
30. 4N-5857 [7] CAP  
31. 9L-5854 [6] BAND  
32. 4W-4588 A SLEEVE  
33. 9S-4190 B [1] PLUG  
34. B [1] SEAL  
  5N-0093 AF [6] LINER SEAT INSERT  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   INDICATES CHANGE
  F   NOT SHOWN
 

#HEBP12150013
 

2W-6039: CYLINDER BLOCK GP

2W6039 CYLINDER BLOCK GP*R
TYPE 1- ENGINE S/N 70V15842, 70V15846-UP
FIELD INSTALLATION--FIELD REPLACEMENT FOR 8N9267
c309484 HEBP1215
2W6039 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9881 [6] TUBE AS-OIL JET  
2. 9F-2247 [3] PLUG  
3. 7M-7410 [2] PLUG  
4. 4N-5857 [7] CAP  
5. 7H-3171 [3] PLUG-PIPE  
6. 9H-1031 [14] WASHER-HARD  
7. 3P-1323 [14] BOLT-BEARING CAP  
8. 3J-5389 [1] PLUG  
9. 030-7571 [4] BOLT  
10. 1W-3133 [1] COVER  
11. 1W-3132 [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4K-1388 [1] SEAL-O-RING  
14. 9S-8009 [1] PLUG-O-RING  
15. 5M-6214 [1] PLUG-PIPE  
16. 4N-6658 [1] BEARING-SLEEVE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-0-RING  
19. 2M-9780 [2] SEAL-O-RING  
20. 3J-5390 [5] PLUG  
21. 4N-9916 [6] BOLT-OIL JET  
22. 4N-0685 [6] BEARING-SLEEVE  
 

#HEBP12150014
 

2W-6039: CYLINDER BLOCK GP

2W6039 CYLINDER BLOCK GP*R
TYPE 2- ENGINE S/N 70V15842 & 70V15846-UP
FIELD INSTALLATION--FIELD REPLACEMENT FOR 8N9267
c335200 HEBP1215
2W6039 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9881 [6] TUBE AS-OIL JET  
2. 9F-2247 [3] PLUG  
3. 7M-7410 [2] PLUG  
4. 4N-5857 [7] CAP  
5. 7H-3171 [3] PLUG-PIPE  
6. 9H-1031 [14] WASHER-HARD  
7. 3P-1323 [14] BOLT-BEARING CAP  
8. 3J-5389 [1] PLUG  
9. 030-7571 [4] BOLT  
10. 4W-8585 C [1] COVER  
11. 7W-6081 C [1] GASKET  
12. 2M-6471 [2] PLUG-CUP  
13. 4K-1388 [1] SEAL-O-RING  
14. 9S-8009 [1] PLUG-O-RING  
15. 5M-6214 [1] PLUG-PIPE  
16. 4N-6658 [1] BEARING-SLEEVE  
17. 8S-9094 [1] PLUG-ORIFICE  
18. 9S-4190 [2] PLUG-0-RING  
19. 2M-9780 [2] SEAL-O-RING  
20. 3J-5390 [5] PLUG  
21. 4N-9916 [6] BOLT-OIL JET  
22. 4N-0685 [6] BEARING-SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP12150015
 

8N-3148: COVER GP-CYLINDER BLOCK

8N3148 CYLINDER BLOCK COVER GROUP
ENGINE SERIAL NO. 70V5678-UP
c220910 HEBP1215
8N3148 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [4] BOLT  
  5M-2894 [4] WASHER  
2. 4N-0996 [2] COVER  
3. 4N-0699 [2] GASKET  
 

#HEBP12150016
 

7N-1203: CYLINDER BLOCK GP

7N1203 CYLINDER BLOCK GROUP
PART OF 4N2257 CYLINDER BLOCK GROUP SHOWN ON PAGE 6
c219338 HEBP1215
7N1203 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 C [3] PLUG  
2. 4N-6658 [1] BEARING  
3. 7M-7410 C [2] PLUG  
4. 4N-0997 [1] COVER  
5. 4N-0998 [1] GASKET  
6. 0S-1594 [6] BOLT  
  5M-2894 [6] WASHER  
7. 4N-9881 [6] TUBE ASSEM.  
8. 4N-5857 C [7] CAP  
9. 3P-1323 [14] BOLT  
  9H-1031 [14] WASHER  
10. 2M-6471 [2] PLUG  
11. 8S-9094 [1] DOWEL  
12. 9S-4190 [2] PLUG (use as required)  
  2M-9780 [2] O-RING (use as required)  
13. 4N-0685 [6] BEARING  
14. 7H-3171 [2] PLUG  
15. 3J-5389 [1] PLUG  
16. 3J-5390 C [5] PLUG  
17. 4N-9916 [6] SCREW  
18. 5M-6214 C [1] PLUG  
  C   INDICATES CHANGE
 

#HEBP12150017
 

6N-3907: CRANKSHAFT AS

6N3907 CRANKSHAFT ASSEMBLY*R
ENGINE SERIAL NO. 70V4546 TO 70V15294 INCLUSIVE
PART OF 4N0741 CRANKSHAFT GROUP SHOWN ON PAGE 8
c237278 HEBP1215
6N3907 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0684 [1] PIN  
2. 9F-2247 [6] PLUG  
3. 7N-7591 C [2] GEAR (80 teeth)  
4. 7S-5005 [1] DOWEL  
5. 6N-1950 [1] SPACER  
  C   INDICATES CHANGE
 

#HEBP12150018
 

4N-0741: CRANKSHAFT GP

4N0741 CRANKSHAFT GROUP
ENGINE SERIAL NO. 70V4546 TO 70V15294 INCLUSIVE
6N3907 CRANKSHAFT PARTS ARE SHOWN ON PAGE 8
c177823 HEBP1215
4N0741 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-3907 RY [1] CRANKSHAFT ASSEM.  
    (Separate Illustration)
2. 7N-8947 C [2] PLATE  
3. 7N-1999 C [2] SEAL GROUP  
    (Each Includes)
  5S-9022 [1] SEAL  
4. 4N-0848 [1] SLEEVE  
5. 8N-5421 C [7] BEARING  
  8N-5422 CA [7] BEARING .025 in. undersize  
  8N-5423 CA [7] BEARING .050 in. undersize  
  8N-5424 CA [7] BEARING .025 in. oversize  
  8N-5425 CA [7] BEARING .025 in. oversize .025 in. undersize  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  A   NOT PART OF THIS GROUP
 

#HEBP12150019
 

2W-0440: CRANKSHAFT AS

2W0440 CRANKSHAFT GP
ENGINE S/N 70V15295-16169
PART OF 2W1732 CRANKSHAFT
c307753 HEBP1215
2W0440 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 245 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0684 [1] PIN  
2. 9F-2247 [6] PLUG  
3. 1W-9302 [2] GEAR (80 TEETH)  
4. 7S-5005 [1] DOWEL  
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog 245 :

CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
4N-2257 CYLINDER BLOCK GP
1W-1440 ENGINE AR
1W-1440 ENGINE AR
7N-9472 ENGINE AR
7N-9472 ENGINE AR
4N-2255 ENGINE AR
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
8N-3148 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
7N-1203 CYLINDER BLOCK GP
CRANKSHAFT AS
6N-3907 CRANKSHAFT AS
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP

Truck sale:

Caterpillar BG-2455D, Asphalt Pavers, Construction
15,192 
Caterpillar BG-2455D, Asphalt Pavers, Construction
- Asphalt Pavers
MILTON CAT
Caterpillar 245
 
Caterpillar 245
- Crawler Excavators
FOLEY, INC.
Caterpillar BG2455C, Asphalt Pavers, Construction
21,201 
Caterpillar BG2455C, Asphalt Pavers, Construction
- Asphalt pavers
TOROMONT CAT
1983 CAT 245
 
1983 CAT 245

Yellow Parts S.L.
1985 CAT 245
USD $24,045 
1985 CAT 245

Alaskan Equipment Sales
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.