955L TRACK LOADER / POWER SHIFT / 08Y00001-UP (MACHINE) POWERED BY 3304 ENGINE UNDERCARRIAGE Caterpillar SIS




TRACK LOADER 955L TRACK LOADER 08Y
 955L TRACK LOADER / POWER SHIFT / 08Y00001-UP (MACHINE) POWERED BY 3304 ENGINE HEBP1225 955L 08Y   (1978)

Parts group 955L:

  For full view, you need register
UNDERCARRIAGE
IDLER GP
FRONT IDLER GROUP
1V-8050 FRONT IDLER GROUP
1V8050 FRONT IDLER GROUP-PART 1
SERIAL NO. 8Y1 TO 8Y1443 INCLUSIVE
1V-8050 FRONT IDLER GROUP
1V8050 FRONT IDLER GROUP-PART 2
SERIAL NO. 8Y1 TO 8Y1443 INCLUSIVE
FRONT IDLER GROUP
1V-8050 FRONT IDLER GROUP
1V8050 FRONT IDLER GROUP-PART 1
SERIAL NO. 8Y1444-UP
1V-8050 FRONT IDLER GROUP
1V8050 FRONT IDLER GROUP-PART 2
SERIAL NO. 8Y1444-UP
ROLLER GP
ROLLER GP-TRACK CARRIER
1V-8055 ROLLER GP-TRACK CARRIER
1V8055 TRACK CARRIER ROLLER GROUP-2 REQUIRED
TRACK ROLLER GP
9S-9403 TRACK ROLLER GP
9S9403 TRACK ROLLER GROUP-SINGLE FLANGE-6 REQUIRED
9S9404 TRACK ROLLER GROUP-DOUBLE FLANGE-6 REQUIRED
TRACK GP
TRACK GROUPS
TRACK GROUPS
TRACK GROUPS-2 REQUIRED-SEALED AND LUBRICATED
TRACK GP-GROUSER
3V-7828 TRACK GP-GROUSER
3V7828 TRACK GROUP-533.4 MM (21") DOUBLE GROUSER SHOE-2 REQUIRED
PART OF 3A5357 WIDE GAUGE TRAXCAVATOR ARRANGEMENT LISTED ON PAGE 148B
AN ATTACHMENT
3A-5356 WIDE GAUGE TRACK LOADER ARRANGEMENT-1828.8 MM (72 IN.)
3A5356 WIDE GAUGE TRACK LOADER ARRANGEMENT-1828.8 MM (72 IN.)
SERIAL NO. 64J9258-UP. FOR USE WITH LOW GROUND PRESSURE. AN ATTACHMENT
3A-5357 TRACK LOAD ARRANGEMENT-WIDE GAUGE-1828.8 MM (72 IN.)
3A5357 TRACK LOAD ARRANGEMENT-WIDE GAUGE-1828.8 MM (72 IN.)
SERIAL NO. 64J9258-UP. PART OF 3A5356 WIDE GAUGE TRACK LOADER ARRANGEMENT
LISTED ON PAGE 148B. AN ATTACHMENT
FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
1V-8053 FRAME GP-TRACK ROLLER
1V8053 TRACK ROLLER FRAME GROUP
NOTE: QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH R.H. & L.H. SIDES
TRACK ROLLER FRAME GROUP
2V-9803 TRACK ROLLER FRAME GROUP
2V9803 TRACK ROLLER FRAME GROUP
PART OF 3A5357 WIDE GAUGE TRAXCAVATOR ARRANGEMENT LISTED ON PAGE 148B
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Specifications
Front Idlers And Recoil Springs
955L TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Disassembly and Assembly
Front Idlers
955L TRACK-TYPE LOADER POWER TRAIN
Front Idler Yokes
955L TRACK-TYPE LOADER POWER TRAIN
Hydraulic Track Adjusters
955L TRACK-TYPE LOADER POWER TRAIN
Recoil Springs
955L TRACK-TYPE LOADER POWER TRAIN
Service Magazine
New Idlers And Track Roller Frames Improve Balance And Stability{4159,4151}
1979/11/12
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Specifications
Track Carrier Rollers<BR> (1V8055)
955L TRACK-TYPE LOADER POWER TRAIN
Track Rollers<BR> (9S9403 &amp; 9G8099 Single Flange), (9S9404 &amp; 9G8098 Double Flange)
955L TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}
Disassembly and Assembly
Track Carrier Rollers
955L TRACK-TYPE LOADER POWER TRAIN
Track Rollers
955L TRACK-TYPE LOADER POWER TRAIN
Service Magazine
Carrier Roller Replacement Rims Now Available{4154}
1984/03/12
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16
Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10
Track-Type Tractor Track Roller Cap Bolt Torque Procedure And Re-Use Guidelines {4180}
2015/05/11
Specifications
Front Idlers And Recoil Springs
955L TRACK-TYPE LOADER POWER TRAIN
Disassembly and Assembly
Recoil Springs
955L TRACK-TYPE LOADER POWER TRAIN
Technical Information Bulletin
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Adjustment Of The Track
955L TRACK-TYPE LOADER POWER TRAIN
Track
955L TRACK-TYPE LOADER POWER TRAIN
Track Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN
Track Carrier Rollers<BR> (1V8055)
955L TRACK-TYPE LOADER POWER TRAIN
Track Rollers<BR> (9S9403 &amp; 9G8099 Single Flange), (9S9404 &amp; 9G8098 Double Flange)
955L TRACK-TYPE LOADER POWER TRAIN
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Disassembly and Assembly
Track Carrier Rollers
955L TRACK-TYPE LOADER POWER TRAIN
Track Rollers
955L TRACK-TYPE LOADER POWER TRAIN
Tracks
955L TRACK-TYPE LOADER POWER TRAIN
Hydraulic Track Adjusters
955L TRACK-TYPE LOADER POWER TRAIN
Track Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN
Service Magazine
New Idlers And Track Roller Frames Improve Balance And Stability{4159,4151}
1979/11/12
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
General Duty Link Assemblies Replace Hybrid Link Assemblies for Certain D6D, D6G Track-Type Tractors 963, 955 Track-Type Loaders {4169, 4171}
General Duty Link Assemblies Replace Hybrid Link Assemblies for Certain D6D, D6G Track-Type Tractors 963, 955 Track-Type Loaders {4169, 4171}
Undercarriage Reconditioning Bulletin
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Truck Engine News
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Reconditioning Bulletin
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Service Magazine
Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24
Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05
Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27
Two New Track Presses Are Now Available {0700, 0729}
2004/12/27
Specifications
Track Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN
Parallel Alignment Of Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN
Disassembly and Assembly
Track Roller Frames
955L TRACK-TYPE LOADER POWER TRAIN
Service Magazine
New Idlers And Track Roller Frames Improve Balance And Stability{4159,4151}
1979/11/12
Reuse And Salvage Guidelines
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Procedure to Restore Sprocket Shaft Bores in Oval Track-Type Machines{4058, 4164, 4184}
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Truck sale:

Caterpillar 955L
 
Caterpillar 955L
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
19,200 
Caterpillar 955L, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
NMC
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
FABICK CAT
Caterpillar 955L, Construction
17,000 
Caterpillar 955L, Construction
- track loaders
HOLT CAT