AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N281 GOVERNOR AND FUEL INJECTION PUMP GROUP ENGINE SERIAL NO. 48V35434 TO 48V39967 INCLUSIVE. 6N244 PUMP & 6N509 TORQUE CONTROL PARTS ARE SHOWN ON PAGES 56 & 66 955L


FUEL SYSTEM
GOVERNOR GP

TRACK LOADER 955L TRACK LOADER 08Y
 955L TRACK LOADER / POWER SHIFT / 08Y00001-UP (MACHINE) POWERED BY 3304 ENGINE HEBP1225 955L 08Y   (1978)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
6N-0281 GOV & FUEL INJ PUMP GP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
GOV & FUEL INJ PUMP GP
6N-0281 GOV & FUEL INJ PUMP GP
4N-6116 GOV & FUEL INJ PUMP GP
 

#HEBP12250110
 

6N-0281: GOV & FUEL INJ PUMP GP

6N281 GOVERNOR AND FUEL INJECTION PUMP GROUP
ENGINE SERIAL NO. 48V35434 TO 48V39967 INCLUSIVE. 6N244 PUMP & 6N509
TORQUE CONTROL PARTS ARE SHOWN ON PAGES 56 & 66
c201367 HEBP1225
6N0281 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] TORQUE CONTROL  
2. Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#HEBP12250111
 

4N-4510: COVER GP-GOVERNOR

4N4510 GOVERNOR COVER GROUP
c144197 HEBP1225
4N4510 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-7905 [1] PLUG  
2. 4N-4508 [1] COVER  
  4N-4509 [1] GASKET  
3. 0S-1615 [2] BOLT  
 

#HEBP12250112
 

6N-0281: GOV & FUEL INJ PUMP GP

6N281 GOVERNOR AND FUEL INJECTION PUMP GROUP
ENGINE SERIAL NO. 48V39968-UP. 6N244 PUMP & 6N581 TORQUE CONTROL PARTS ARE
SHOWN ON PAGES 56 & 66A
c220698 HEBP1225
6N0281 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0581 C [1] TORQUE CONTROL  
2. 6N-0244 Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP12250113
 

4N-6116: GOV & FUEL INJ PUMP GP

4N6116 GOVERNOR AND FUEL INJECTION PUMP GROUP-FIELD INSTALLATION
HEBP12250113 HEBP1225
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  4N-6115 Y [1] GOVERNOR & FUEL INJECTION PUMP GROUP  
  2H-3934 [1] SEAL-TRANSFER PUMP TO PLATE  
  6L-5773 [1] GASKET-SMOKE LIMITER  
  8L-8601 [6] SPACER .002" (0.05 MM)  
  9L-3625 [1] SPRING .022" (0.55 MM)  
  9L-3626 [1] SPACER .016" (0.41 MM)  
  9L-5176 [1] SPRING .024" (0.61 MM)  
  9L-6483 [1] SPRING .020" (0.52 MM)  
  9L-7235 [3] SHIM .039" (0.99 MM)  
  9L-9347 [2] SHIM .020" (0.52 MM)  
  5M-6214 [1] PLUG  
  4N-0049 [1] GASKET-IDLE SCREW COVER  
  4N-0159 [1] GASKET-ADAPTER BASE TO GOVERNOR HOUSING  
  4N-0402 [1] GASKET-THROTTLE  
  4N-0508 [1] GASKET-TORQUE SPRING COVER  
  4N-0594 [1] GASKET-GOVERNOR HOUSING TO FUEL PUMP  
    HOUSING
  4N-4224 [1] GOVERNOR SPRING (2) YELLOW & (1) WHITE  
    STRIPE
  4N-4227 [1] GOVERNOR SPRING (2) YELLOW & (1) GREEN  
    STRIPE
  4N-4228 [1] GOVERNOR SPRING (2) YELLOW & (1) PURPLE  
    STRIPE
  4N-7777 [3] SPACER .010" (0.25 MM)  
  4N-9056 [1] GASKET-SIDE COVER  
  4N-9098 [1] SPACER .200" (5.08 MM)  
  4N-9337 [1] GASKET-FUEL RETURN ELBOW  
  6N-2504 [1] SPACER .005" (0.12 MM)  
  6N-2843 [1] GASKET-FILTER BASE  
  1P-0436 [1] GASKET-PRIMING PUMP  
  1P-6453 [1] BAR .250" (6.35 MM)  
  2P-0726 [1] SPRING (1) RED STRIPE  
  9S-8597 [1] SPRING (1) WHITE STRIPE  
    FORM SMHS6728
  Y   SEPARATE ILLUSTRATION
 

#HEBP12250114
 

6N-0244: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N244 GOVERNOR AND FUEL INJECTION PUMP GROUP
PART OF 6N281 GOVERNOR & FUEL INJECTION PUMP GROUP SHOWN ON PAGE 54
4N1834 PUMP & 9N867 CONTROL PARTS ARE SHOWN ON PAGES 58 THROUGH 61 & 66
c156324 HEBP1225
6N0244 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5773 [1] GASKET  
2. 2M-5471 [2] BOLT  
3. 9N-0867 CY [1] FUEL RATIO CONTROL  
    (Separate Illustration)
4. 4N-0440 [1] LEVER ASSEM.  
    (Includes)
5. 5S-6458 [1] DOWEL  
6. 2N-2658 [1] BOLT  
7. 6D-0238 [1] VALVE ASSEM.  
8. 4N-1834 CY [1] FUEL INJECTION PUMP  
    (Separate Illustration)
9. 0S-1615 [8] BOLT  
10. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
11. 4N-9338 [1] COVER  
  4N-9056 [1] GASKET  
12. 6N-2957 C [1] WASHER  
13. 4N-0444 [2] SPACER  
14. 4N-4320 [1] SHAFT ASSEM.  
15. 4N-0159 [1] GASKET  
16. 6B-4198 [1] BOLT  
17. 4N-5658 [1] PLUG  
18. 4N-5515 [1] ADAPTER  
19. 4B-9365 [1] BOLT 7.62 cm(3 in.) long  
  1B-2718 [1] BOLT 15.24 cm(6 in.) long  
20. 6N-2956 C [1] WASHER (spring)  
21. 4N-4366 C [1] SPRING  
22. 4N-8179 [1] PIN  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#HEBP12250115
 

4N-6115: GOV & FUEL INJ PUMP GP

4N6115 GOVERNOR AND FUEL INJECTION PUMP GROUP
PART OF 4N6116 GOVERNOR & FUEL INJECTION PUMP GROUP LISTED ON PAGE 55
6N5356 PUMP & 6N509 TORQUE CONTROL PARTS ARE SHOWN ON PAGES 62 THROUGH 66
c211933 HEBP1225
4N6115 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT 2.54 cm(1 in.) long  
3. 8S-4710 [2] BOLT 10.16 cm(4 in.) long  
4. 4N-0159 [1] GASKET  
5. 4N-4320 [1] SHAFT ASSEM.  
6. 6N-5356 Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 4N-0444 [2] SPACER  
8. 4N-9338 [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. 4N-8179 [1] PIN  
14. 6N-0509 Y [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
15. 4N-0443 [1] PIN  
16. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#HEBP12250116
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP-PART 1 OF 4
ENGINE SERIAL NO. 48V35434 TO 49V41893 INCLUSIVE
PART OF 6N244 GOVERNOR & FUEL INJECTION PUMP GROUP SHOWN ON PAGE 56
c182798 HEBP1225
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 C [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] PIN (spring)  
3. 8S-6814 [2] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 C [1] SEAL  
8. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 6N-6567 C [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 C [1] SHAFT  
19. 4N-9019 C [1] DOWEL  
20. 4N-0927 [1] SHAFT ASSEM.  
21. 5M-6509 C [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 C [1] BODY ASSEM.  
    (Includes)
  4N-5050 [1] PLUG  
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-0507 [1] SHAFT ASSEM.  
29. 4N-3779 [1] KEY  
30. 4N-0429 [1] GEAR (15 teeth)  
31. 4N-0527 [1] SPRING  
32. 4N-0435 [1] SEAT  
33. 6N-7451 C [1] SEAT  
34. 6N-2957 C [2] WASHER  
  6N-2956 C [1] WASHER (spring)  
35. 4N-1723 [1] SHIELD  
  C   INDICATES CHANGE
 

#HEBP12250117
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP-PART 2 OF 4
ENGINE SERIAL NO. 48V35434 TO 48V41893 INCLUSIVE
PART OF 6N244 GOVERNOR & FUEL INJECTION PUMP GROUP SHOWN ON PAGE 56
c223908 HEBP1225
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 3B-8695 [1] BOLT- 8.89 cm(3.5 in.) long  
  2A-4781 [1] BOLT-6.98 cm(2.75 in.) long  
3. 1P-9925 C [2] BOLT- 6.35 cm(2.5 in.) long  
4. 6N-1346 C [1] HOUSING ASSEM.  
    (Includes)
5. 4N-2333 [1] PIN (spring)  
6. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
7. 6N-5325 C [4] PIN  
8. 1P-2298 [1] VALVE ASSEM.  
9. 4N-5481 C [1] STUD  
10. 6N-1078 C [1] BEARING  
11. 8N-0628 C [1] BEARING  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 9S-8632 [1] SPRING  
20. 4N-0116 [1] GUIDE  
21. 5J-5314 [4] BOLT  
  C   INDICATES CHANGE
 

#HEBP12250118
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP-PART 3 OF 4
ENGINE SERIAL NO. 48V35434 TO 48V41893 INCLUSIVE
PART OF 6N244 GOVERNOR & FUEL INJECTION PUMP GROUP SHOWN ON PAGE 56
c216618 HEBP1225
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [4] BONNET  
2. 4N-0218 C [4] BUSHING  
3. 9B-1320 [4] VALVE  
  9L-9424 [4] SPRING  
4. 4N-0224 [4] RING  
5. 6N-7527 C [4] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [4] SPRING  
7. 4N-2728 [4] WASHER  
8. 4N-1750 [4] LIFTER  
  4N-2685 C [4] ROLLER  
9. 2N-2658 [4] SCREW  
10. 4N-1763 [4] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 2M-5471 [2] BOLT  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  4N-0506 [1] COVER  
18. 4N-1594 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER -1.53 mm(.06 in.) thick  
  8F-1326 [1] WASHER- .82 mm(.032 in.) thick  
19. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
20. 4N-0445 [1] LEVER  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0223 C [4] SEAL  
  C   INDICATES CHANGES
 

#HEBP12250119
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP GROUP-PART 4 OF 4
ENGINE SERIAL NO. 48V35434 TO 48V41893 INCLUSIVE
PART OF 6N244 GOVERNOR & FUEL INJECTION PUMP GROUP SHOWN ON PAGE 56
c209401 HEBP1225
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 955L TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 0S-1616 [4] BOLT  
5. 4N-0402 [1] GASKET  
6. 9S-8601 [1] PIN  
7. 6N-5482 C [2] PLATE  
8. 4N-0605 [1] SPRING  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 [1] SEAL  
11. 4N-1767 [1] VALVE  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Filter Base, Fuel Transfer Pump (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Transfer Pump (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Transfer Pump (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing And Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Governor (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Governor (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Check Valve And Bypass Valve (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pumps (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing (Sleeve Metering Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Fuel Injection Pump Housing (Compact Fuel System)
3304 VEHICULAR ENGINE FOR 955L TRACK-TYPE LOADER
Transmission And Governor Control Linkage (955L)
955L, 977L & 983B TRACK-TYPE LOADERS OPERATOR'S STATION
Transmission And Governor Control Linkage (977L &amp; 983B)
955L, 977L & 983B TRACK-TYPE LOADERS OPERATOR'S STATION
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 955L :

GOVERNOR CONTROL GROUP
3V-6930 GOVERNOR CONTROL GROUP
MUFFLER MOUNTING GROUP
7N-5522 MUFFLER MOUNTING GROUP
MUFFLER SUPPORT GROUP
7N-2808 MUFFLER SUPPORT GROUP
MUFFLER MOUNTING GROUP
3A-5689 MUFFLER MOUNTING GROUP
MUFFLER SUPPORT GROUP
6N-9407 MUFFLER SUPPORT GROUP
CAP AS-RAIN
7S-1784 CAP AS-RAIN
MUFFLER GROUP
3A-5649 MUFFLER GROUP
MUFFLER GROUP
8S-2815 MUFFLER GROUP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
GOV & FUEL INJ PUMP GP
6N-0281 GOV & FUEL INJ PUMP GP
4N-6116 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0244 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP

Truck sale:

Caterpillar 955L
 
Caterpillar 955L
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
19,200 
Caterpillar 955L, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
NMC
Caterpillar 955L, Construction
 
Caterpillar 955L, Construction
- track loaders
FABICK CAT
Caterpillar 955L, Construction
17,000 
Caterpillar 955L, Construction
- track loaders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.