AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4 Engine Serial No. 49V13216 to 49V18329 inclusive Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42 D5B


FUEL SYSTEM
GOVERNOR GP

TRACK-TYPE TRACTOR D5B TRACK-TYPE TRACTOR 21Y
 D5B TRACTOR -SPECIAL APPLICATION / DIRECT DRIVE / 21Y00001-00557 (MACHINE) POWERED BY 3306 ENGINE HEBP1242 D5B 21Y   (1979)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-3472 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
 

#HEBP12420080
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Engine Serial No. 49V13216 to 49V18329 inclusive
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c226098 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 6N-1347 C [1] HOUSING ASSEM.  
    (Includes)
3. 4N-5481 C [1] STUD  
4. 4N-2333 [1] PIN  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL  
7. 1P-2298 [1] VALVE ASSEM.  
8. 6N-5325 [6] PIN  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [2] BOLT 6.35 cm(2.50 in.) long  
18. 4N-0594 [1] GASKET  
19. 2A-4781 [1] BOLT 6.99 cm(2.75 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.50 in.) long  
20. 6N-7523 C [1] WASHER  
  C   INDICATES CHANGE
 

#HEBP12420081
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Engine Serial No. 49V13216 to 49V18329 inclusive
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c227875 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [6] BONNET  
2. 4N-0218 [6] BUSHING  
3. 9B-1320 C [6] VALVE  
  9L-9424 [6] SPRING  
4. 4N-0224 [6] RING  
5. 6N-7527 C [6] PUMP ASSEM.  
    (Includes)
6. 4N-4318 [1] SPRING  
7. 4N-2728 [1] WASHER  
8. 4N-1750 [6] LIFTER  
  4N-2685 [6] ROLLER  
9. 2N-2658 [6] SCREW  
10. 4N-1763 [6] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 4N-0445 [1] LEVER  
17. 4N-1591 [1] COVER ASSEM.  
  6N-0411 C [1] COVER  
18. 6N-0412 C [1] SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52 mm(.06 in.)thick  
  8F-1326 [1] WASHER .813mm(.032 in.)thick  
19. 2P-3200 C [1] BOLT  
  1J-9671 C [1] SEAL  
20. 2M-5471 [2] BOLT  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0223 C [6] SEAL  
  C   INDICATES CHANGE
 

#HEBP12420082
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Engine Serial No. 49V13216 to 49V18329 inclusive
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c209588 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
7. 6N-5482 C [2] PLATE  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 C [1] SEAL  
12. 0S-1616 [4] BOLT  
13. 4N-0402 [1] GASKET  
14. 9S-8601 [1] PIN  
15. 4N-1767 [1] VALVE  
16. 4N-0605 [1] SPRING  
  C   INDICATES CHANGE
 

#HEBP12420083
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Engine Serial No. 49V18330-Up
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c179730 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING ASSEM.  
2. 4N-2333 [1] DOWEL  
3. 8S-6814 [1] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 4N-4313 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0572 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 [1] BODY ASSEM.  
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-5050 [1] PLUG  
29. 4N-0429 [1] GEAR (15 teeth)  
30. 4N-0527 [1] SPRING  
31. 4N-0435 [1] SEAT  
32. 6N-7451 [1] SEAT  
33. 4N-0927 [1] SHAFT ASSEM.  
34. 6N-2956 [1] WASHER (spring)  
35. 6N-2957 [2] WASHER  
36. 4N-1723 [1] SHIELD  
37. 4N-3779 [1] KEY  
  C   INDICATES CHANGE
 

#HEBP12420084
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Engine Serial No. 49V18330-Up
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c179731 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7523 C [2] WASHER  
2. 8N-1570 [1] HOUSING ASSEM.  
    (Includes)
  5P-4810 C [1] BEARING  
  8N-0628 [1] BEARING  
3. 4N-5481 [1] STUD  
4. 4N-2333 [1] PIN  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL  
7. 1P-2298 [1] VALVE ASSEM.  
8. 8N-0984 [6] PIN  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [2] BOLT 6.35 cm(2.50 in.) long  
18. 4N-0594 [1] GASKET  
19. 2A-4781 [1] BOLT 6.99 cm(2.75 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.50 in.) long  
  C   INDICATES CHANGE
 

#HEBP12420085
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Engine Serial No. 49V18330-Up
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c179732 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [6] BONNET  
2. 4N-0218 [6] BUSHING  
3. 9B-1320 [6] VALVE  
  9L-9424 [6] SPRING  
4. 4N-0224 [6] RING  
5. 6N-7527 [6] PUMP ASSEM.  
    (Includes)
6. 4N-4318 [1] SPRING  
7. 4N-2728 [1] WASHER  
8. 8N-1317 C [6] LIFTER  
  4N-2685 [6] ROLLER  
9. 2N-2658 [6] SCREW  
10. 4N-1763 [6] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 4N-0445 [1] LEVER  
17. 4N-1591 [1] COVER ASSEM.  
  6N-0411 [1] COVER  
18. 6N-0412 [1] SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52 mm(.06 in.)thick  
  8F-1326 [1] WASHER .813mm(.032 in.)thick  
19. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
20. 2M-5471 [2] BOLT  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 6F-6672 C [6] SEAL  
  C   INDICATES CHANGE
 

#HEBP12420086
 

4N-1836: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Engine Serial No. 49V18330-Up
Part of 6N3472 Governor and Fuel Injection Pump Group shown on Page 42
c179733 HEBP1242
4N1836 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 6N-5482 [2] PLATE  
5. 4N-0687 [1] COVER ASSEM.  
    (Includes)
6. 4N-2786 [1] SEAL  
7. 0S-1616 [4] BOLT  
8. 4N-0402 [1] GASKET  
9. 9S-8601 [1] PIN  
10. 4N-1767 [1] VALVE  
11. 4N-0605 [1] SPRING  
 

#HEBP12420087
 

6N-5355: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N5355 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Field Installation--Type 1
Part of 6N5228 Governor and Fuel Injection Pump Group shown on Page 41
c212933 HEBP1242
6N5355 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING ASSEM.  
    (Includes)
2. 4N-2333 [1] DOWEL  
3. 8S-6814 [2] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 6N-5323 [1] GUIDE  
9. 9S-4180 C [1] PLUG  
  4J-7533 C [1] SEAL  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 4N-4313 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0572 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 C [1] BODY ASSEM.  
    (Includes)
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-5050 [1] PLUG  
29. 4N-0429 [1] GEAR (15 teeth)  
30. 4N-0527 [1] SPRING  
31. 6N-2957 [1] WASHER  
32. 6N-2956 [1] WASHER  
33. 4N-0927 [1] SHAFT ASSEM.  
34. 4N-1723 [1] SHIELD  
35. 6N-4655 [1] DASHPOT ASSEM.  
  6N-7451 [1] SEAT  
36. 4N-6407 [1] SPOOL  
37. 4N-6406 [1] RING  
38. 4N-6404 [1] RING  
39. 4N-0425 [3] WEIGHT  
40. 4N-3779 [1] KEY  
  C   INDICATES CHANGE
 

#HEBP12420088
 

6N-5355: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N5355 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Field Installation--Type 1
Part of 6N5228 Governor and Fuel Injection Pump Group shown on Page 41
c226097 HEBP1242
6N5355 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 6N-1347 C [1] HOUSING ASSEM.  
    (Includes)
3. 4N-5481 C [1] STUD  
4. 4N-2333 [1] PIN  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL  
7. 1P-2298 [1] VALVE ASSEM.  
8. 6N-5325 [6] PIN  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [1] BOLT  
  6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 1P-9925 [1] BOLT 6.35 cm(2.5 in.) long  
  2A-4781 [1] BOLT 6.99 cm(2.75 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.5 in.) long  
  C   INDICATES CHANGE
 

#HEBP12420089
 

6N-5355: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N5355 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Field Installation--Type 1
Part of 6N5228 Governor and Fuel Injection Pump Group shown on Page 41
c227856 HEBP1242
6N5355 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [6] BONNET  
2. 4N-0218 [6] BUSHING  
3. 9B-1320 [6] VALVE  
  9L-9424 [6] SPRING  
4. 4N-0224 [6] RING  
5. 4N-1765 [6] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [6] SPRING  
7. 4N-2728 [6] WASHER  
8. 4N-1750 [6] LIFTER  
  4N-2685 [6] ROLLER  
9. 2N-2658 [6] SCREW  
10. 4N-1763 [6] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 4N-0445 [1] LEVER  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  6N-0411 [1] COVER  
18. 6N-0412 C [1] SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52 mm(.06 in.)thick  
  8F-1326 [1] WASHER .81 mm(.032 in.)thick  
19. 2P-3200 C [1] BOLT  
  1J-9671 C [1] SEAL  
20. 2M-5471 [2] BOLT  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0223 [6] SEAL  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> For D5D &amp; D6D With Power Shift Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Power Shift Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Direct Drive Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Power Shift Transmission (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor and Decelerator Control <BR> (9S7053 For D7G Tractors; Power Shift) (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Power Shift Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Direct Drive Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Power Shift Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Housing<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &&amp; D6D With Power Shift Transmission
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor
3306C Engines for Caterpillar Built Machines
Testing and Adjusting
Governor - Adjust
3306C Engines for Caterpillar Built Machines
Disassembly and Assembly
Governor Control
D4E, D5B & D6D TRACTORS OPERATOR'S STATION
Fuel Injection Pumps
3306 VEHICULAR ENGINE FOR D5B TRACTORS
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR D5B TRACTORS
Fuel Transfer Pump
3306 VEHICULAR ENGINE FOR D5B TRACTORS
Fuel Injection Pump Housing And Governor, Separation And Connection
3306 VEHICULAR ENGINE FOR D5B TRACTORS
Governor
3306 VEHICULAR ENGINE FOR D5B TRACTORS
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
Different Bracket Assembly, Lever Used, Washer Added To Governor Control Groups{1265,1269}
1980/10/13
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03
Specifications And Revised Rack Adjustment Procedures For Variable Horsepower Fuel Systems{1251,1257,1250}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog D5B :

GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
TORQUE CONTROL GROUP
6N-0509 TORQUE CONTROL GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-3472 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-5228 GOVERNOR AND FUEL INJECTION PUMP GROUP
TORQUE CONTROL GROUP
6N-0454 TORQUE CONTROL GROUP
6N-5227 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0295 GOVERNOR AND FUEL INJECTION PUMP GROUP
TACHOMETER DRIVE GROUP
6N-1399 TACHOMETER DRIVE GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-1836 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-5355 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-5355 GOVERNOR AND FUEL INJECTION PUMP GROUP

Truck sale:

Caterpillar D5B, Construction
22,773 
Caterpillar D5B, Construction
- Dozers
BERGERAT MONNOYEUR S.A.S.
France
CATERPILLAR D5B 1984
 
CATERPILLAR D5B 1984
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR D5B 1978
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
1982 CAT D5B
Call 
1982 CAT D5B

C&C Machinery LLC
CAT D5B
USD $25,500 
CAT D5B

Riggs Tractor Company & Dozer Service
Severy, Kansas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.