5C6813 ENGINE ARRANGEMENT--Part 1 3306 Engine Serial No. 49V17225-Up. NOTE: WHEN ORDERING PARTS GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER D6D

Part No	Qty	Parts name
6A-3831 Y	[ 1]	CYLINDER BLOCK GROUP
7N-9779 Y	[ 1]	CYLINDER BLOCK COVER GROUP
2P-6202 Y	[ 1]	CAMSHAFT GROUP SINGLE
2P-6222 Y	[ 1]	CRANKSHAFT GROUP
2P-6225 Y	[ 1]	CRANKSHAFT SEAL GROUP
9S-8912 Y	[ 6]	CONNECTING ROD AND PISTON GROUP
7N-7858 Y	[ 1]	ENGINE LIFTING GROUP
2P-6486 Y	[ 1]	CYLINDER HEAD GROUP
2P-6516 Y	[ 1]	VALVE MECHANISM COVER GROUP
2P-6526 Y	[ 1]	VALVE MECHANISM GROUP
2P-6531 Y	[ 1]	CYLINDER HEAD COVER GROUP
2P-6546 Y	[ 1]	CYLINDER HEAD FASTENER GROUP
4N-5162 Y	[ 1]	FRONT HOUSING COVER GROUP
2P-6246 Y	[ 1]	TRUNNION GROUP
2P-6498 Y	[ 1]	FRONT HOUSING FASTENER GROUP
2P-7753 Y	[ 1]	ENGINE SUPPORT GROUP
2P-7831 Y	[ 1]	FAN DRIVE GROUP
2P-7838 Y	[ 1]	DAMPER GROUP
2P-8213 Y	[ 1]	PULLEY GROUP
2P-9641 Y	[ 1]	FRONT HOUSING GROUP
2P-9642 Y	[ 1]	FRONT TIMING GEAR GROUP
7S-7878 Y	[ 1]	FLYWHEEL GROUP
		- OR -
7N-4584 Y	[ 1]	FLYWHEEL GROUP
7N-6699 Y	[ 1]	ENGINE SUPPORT GROUP REAR
2P-6119 Y	[ 1]	FLYWHEEL HOUSING GROUP
2P-6152 Y	[ 1]	OIL PAN GROUP
2P-6200 Y	[ 1]	OIL PAN FASTENER GROUP
Y		SEPARATE ILLUSTRATION

#HEBP12450002

5C-6813: ENGINE ARRANGEMENT

ENGINE ARRANGEMENT

5C6813 ENGINE ARRANGEMENT--Part 2
3306 Engine Serial No. 49V17225-Up. NOTE: WHEN ORDERING PARTS
GIVE ENGINE ARRANGEMENT NUMBER AND SERIAL NUMBER

HEBP12450002 HEBP1245

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-3325 Y	[ 1]	FUMES DISPOSAL GROUP
4N-5141 Y	[ 1]	OIL FILLER GROUP
1P-4244 Y	[ 1]	BREATHER GROUP
2P-1784 Y	[ 1]	ENGINE OIL PUMP GROUP
2P-6105 Y	[ 1]	ENGINE OIL LINES GROUP
2P-6475 Y	[ 1]	OIL FILTER GROUP
2P-6493 Y	[ 1]	OIL LEVEL GAUGE GROUP
7N-5909 Y	[ 1]	WATER PUMP GROUP
7N-7211 Y	[ 1]	WATER LINES GROUP
2P-6215 Y	[ 1]	ENGINE OIL COOLER GROUP
2P-6508 Y	[ 1]	TRANSMISSION OIL COOLER GROUP
2P-8173 Y	[ 1]	HOUSING AND REGULATOR GROUP
4N-8970 Y	[ 1]	TURBOCHARGER GROUP
4N-9586 Y	[ 1]	EXHAUST MANIFOLD FASTENER GROUP
6N-0025 Y	[ 1]	TURBOCHARGER OIL LINES GROUP
6N-0164 Y	[ 1]	EXHAUST MANIFOLD GROUP
7N-3884 Y	[ 1]	AIR LINES GROUP
7N-4100 Y	[ 1]	AIR LINES GROUP
4N-4314 Y	[ 1]	FUEL PRIMING PUMP GROUP
4N-4510 Y	[ 1]	GOVERNOR COVER GROUP
6N-0301 Y	[ 1]	GOVERNOR & FUEL INJECTION PUMP GROUP
7N-3616 Y	[ 1]	DRAIN LINES GROUP
7N-4016 Y	[ 1]	FUEL INJECTION LINES GROUP
1P-2299 Y	[ 1]	FUEL FILTER GROUP
5S-8501 Y	[ 1]	GLOW PLUG GROUP
Y		SEPARATE ILLUSTRATION

#HEBP12450003

6A-3831: CYLINDER BLOCK GROUP

CYLINDER BLOCK GROUP

6A3831 CYLINDER BLOCK GROUP
6A6670 Cylinder Block parts are shown on Page 7

c211052 HEBP1245

6A3831 CYLINDER BLOCK GROUP Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-9307	[1]	PLUG
	6F-7062	[1]	GASKET
2.	5S-6670	[18]	SEAL
3.	2P-8889	[6]	LINER
4.	6A-6670 Y	[1]	BLOCK ASSEM.
			(Separate Illustration)
5.	5M-6214	[1]	PLUG
6.	7H-3171 C	[2]	PLUG
7.	5M-6213 C	[4]	PLUG
8.	3J-5389	[2]	PLUG
9.	7M-4046	[4]	BEARING
10.	9L-5854 C	[6]	BAND
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#HEBP12450004

7N-9779: CYLINDER BLOCK COVER GROUP

CYLINDER BLOCK COVER GROUP

7N9779 CYLINDER BLOCK COVER GROUP

c222140 HEBP1245

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4M-6480	[1]	GASKET
2.	0S-1594	[2]	BOLT
	5M-2894	[2]	WASHER
3.	6N-7232	[1]	PLATE
4.	4B-3938	[1]	PLUG-CUP
5.	2A-3798	[2]	DOWEL

#HEBP12450005

6A-6670: CYLINDER BLOCK ASSEMBLY

CYLINDER BLOCK ASSEMBLY

6A6670 CYLINDER BLOCK ASSEMBLY
Part of 6A3831 Cylinder Block Group shown on Page 6

c142099 HEBP1245

6A6670 CYLINDER BLOCK ASSEMBLY Parts scheme

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5M-6213	[1]	PLUG
2.	8B-1312	[2]	DOWEL
3.	7M-4046	[4]	BEARING
4.	4B-5387	[2]	PLUG
5.	5B-7652	[2]	DOWEL
6.	5S-8462	[1]	STUD
7.	8B-6349	[2]	DOWEL
8.	4B-9782	[1]	BALL
9.	9M-5477	[1]	BEARING
10.	7S-3224	[14]	BOLT
	2S-5658	[14]	WASHER
11.	1P-2717	[7]	CAP

#HEBP12450006

2P-6222: CRANKSHAFT GROUP

CRANKSHAFT GROUP

2P6222 CRANKSHAFT GROUP
Note: For Field Replacement of 4N7697 Crankshaft Assembly order 4N7693
shown on Page 8

c210404 HEBP1245

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-8940 C	[2]	PLATE-THRUST
2.	4N-7697	[1]	CRANKSHAFT AS
3.	9F-2247	[6]	PLUG
4.	3S-9730	[7]	BEARING-CRANKSHAFT
	C		CHANGE FROM PREVIOUS TYPE

#HEBP12450007

4N-7693: CRANKSHAFT ASSEMBLY

CRANKSHAFT ASSEMBLY

4N7693 CRANKSHAFT ASSEMBLY--Field Installation

c202604 HEBP1245

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-3858	[1]	SLEEVE
2.	9F-2247	[6]	PLUG
3.	5H-2671	[1]	KEY
4.	4M-9933	[1]	GEAR (40 teeth)
5.	2P-3859	[1]	SLEEVE

#HEBP12450008

2P-6225: CRANKSHAFT SEAL GROUP

CRANKSHAFT SEAL GROUP

2P6225 CRANKSHAFT SEAL GROUP

c209423 HEBP1245

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-4367 C	[1]	SEAL
2.	5S-9021	[1]	SEAL
	C		INDICATES CHANGE

#HEBP12450009

CRANKSHAFT BEARING REPLACEMENTS

HEBP12450009 HEBP1245

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4S-8881	[ 7]	BEARING (.010 UNDERSIZE)
4S-8883	[ 7]	BEARING (.020 UNDERSIZE)
4S-8885	[ 7]	BEARING (.030 UNDERSIZE)
6N-3822	[ 7]	BEARING MAIN
		(.020 OVERSIZE AND .010 UNDERSIZE)
6N-3823	[ 7]	BEARING MAIN (.020 OVERSIZE)

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2002/02/01

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/04/01

New Service Information Tool for CAT Dealers is Now Available {1000}
2002/06/01

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3306C Engines for Caterpillar Built Machines

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

CAT® REMAN ANNOUNCES ADDITIONAL C27, C32 AND 3306 OPTIONS FOR CAT MACHINE APPLICATIONS
CAT® REMAN ANNOUNCES ADDITIONAL C27, C32 AND 3306 OPTIONS FOR CAT MACHINE APPLICATIONS

CAT REMAN ANNOUNCES ADDITIONAL 3116 AND 3306 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL 3116 AND 3306 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS

Testing and Adjusting

Troubleshooting
3306C Engines for Caterpillar Built Machines

Technical Analysis

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Oval Track) {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors {0372, 1000, 7000, 753S, 7565}

Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}
Technical Analysis (TA1) Visual Inspection for Track-Type Tractors (Hydrostatic) {0372, 1000, 7000, 753S, 7565}

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

Solitary Letter "Z" Identifies Custom Machine Products; Two New Identification Plates Used{0336,0337,1000,3150,7000}
1989/08/14

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/08/28

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Responsibilities for Emission Certified Engines {1000}
2005/10/03

Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog D6D :

5C-6813 ENGINE ARRANGEMENT

6A-3831 CYLINDER BLOCK GROUP

7N-9779 CYLINDER BLOCK COVER GROUP

6A-6670 CYLINDER BLOCK ASSEMBLY

2P-6222 CRANKSHAFT GROUP

4N-7693 CRANKSHAFT ASSEMBLY

2P-6225 CRANKSHAFT SEAL GROUP

CRANKSHAFT BEARING REPLACEMENTS

Truck sale:

Caterpillar D6D
- Crawler dozers
HOLT CAT

Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.

25,000

Caterpillar D6D, Crawler dozers, Construction

59,000

Caterpillar D6D, Crawler dozers, Construction

22,417

Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT