1P1947 TRANSMISSION GROUP--Part 1 Note: This Transmission provides the following speeds: (Forward) First--2.54, Second--2.97, Third--3.47, Fourth--4.04, Fifth--4.60 and Sixth--5.54 M.P.H. (Reverse) First--4.06, Second--4.73, Third--5.51 and Fourth--6.28 M.P.H. D6D



POWER TRAIN
TRANSMISSION GP
DRIVE GP-FINAL
SHAFT GP
SPROCKET GP
LINES GP-POWER TRAIN OIL

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 01Y
 D6D TRACTOR - SPECIAL APPLICATION / DIRECT DRIVE / 01Y00001-UP (MACHINE) POWERED BY 3306 ENGINE HEBP1245 D6D 01Y   (1979)

POWER TRAIN

TRANSMISSION GP
TRANSMISSION GROUP
1P-1947 TRANSMISSION GROUP
TRANSMISSION GROUP
1P-1947 TRANSMISSION GROUP
 

#HEBP12450140
 

1P-1947: TRANSMISSION GROUP

1P1947 TRANSMISSION GROUP--Part 1
Note: This Transmission provides the following speeds: (Forward) First--2.54,
Second--2.97, Third--3.47, Fourth--4.04, Fifth--4.60 and Sixth--5.54 M.P.H.
(Reverse) First--4.06, Second--4.73, Third--5.51 and Fourth--6.28 M.P.H.
c209983 HEBP1245
1P1947 TRANSMISSION GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  0L-1351 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  0L-2061 [2] DOWEL  
    (Part of 1P1946 Assem.)
  5M-2477 [1] PLATE  
  7B-3028 [2] SCREW  
  4F-1450 [7] STUD  
    (Part of 1P1946 Assem.)
  6B-9885 [1] COVER  
  6B-9886 [1] GASKET  
  0S-1621 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  6L-8550 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
  8M-5253 [1] SEAL  
  1P-1605 [1] GEAR (35 TEETH)  
  5M-7347 [1] SHAFT  
  3F-1526 [1] DOWEL  
  2A-3746 [2] PLUG  
  5M-7351 [1] SPACER  
  1P-1606 [1] GEAR (38 TEETH)  
  1P-1607 [1] GEAR (41 TEETH)  
  9S-9540 [1] SHAFT  
  1P-1944 [1] GEAR (29 AND 27 TEETH)  
  1P-1610 [1] GEAR (29 Teeth)  
  1P-1946 [1] CASE ASSEM.  
  0S-0700 C [2] STUD  
    (Part of 1P1946 Assem.)
  5M-7368 [1] CAGE  
  0S-1571 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  5M-7342 [1] FLANGE  
  9S-6801 [1] COVER  
  9F-7283 [1] SEAL  
  6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
  5M-7339 [1] WASHER  
  2H-3927 [1] SEAL  
  5P-4258 C [1] SEAL  
  5M-7366 [1] BEARING ASSEM.  
  5M-7367 [1] GASKET  
  2B-7409 [1] PLUG  
  2A-3348 [1] DOWEL  
  1P-1608 [1] GEAR (43 TEETH)  
  1P-1611 [1] GEAR (20 TEETH)  
  9S-3581 [2] CUP  
  9S-3582 [2] CONE  
  1P-1940 [1] SPACER  
  1P-1943 [1] GEAR (32 and 20 Teeth)  
  5M-7338 [1] SHIM  
  1P-1942 [1] GEAR (25 AND 23 TEETH)  
  C   INDICATES CHANGE
 

#HEBP12450141
 

1P-1947: TRANSMISSION GROUP

1P1947 TRANSMISSION GROUP--Part 2
c110599 HEBP1245
1P1947 TRANSMISSION GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  5M-7329 [1] SEAL  
  2A-3746 [1] PLUG  
  5B-1980 [1] DOWEL  
  1J-8694 [1] OUTER RACE  
  4B-8108 [1] INNER RACE AND ROLLER ASSEM.  
  2S-3425 [1] SHAFT  
  2F-6066 [1] RING  
  5M-7356 [1] SPACER  
  6B-0133 [1] OUTER RACE  
  6B-0132 [1] INNER RACE AND ROLLER ASSEM.  
  6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
  5M-7339 [1] WASHER  
  3F-5750 [1] OUTER RACE  
  3B-8845 [1] INNER RACE AND ROLLER ASSEM  
  1P-1948 [1] PLATE  
  4B-4159 [2] SCREW  
    (NOT SHOWN-MOUNTED ON REAR OF BEVEL GEAR CASE)
  5M-7331 [1] RING  
  1F-5546 [1] DOWEL  
  0L-1026 [2] PLUG  
  1P-1609 [1] GEAR (45 TEETH)  
  1P-1604 [1] GEAR (33 TEETH)  
  5M-7356 [1] SPACER  
  5M-7357 [1] OUTER RACE  
  5M-7359 [1] GASKET  
  5M-7360 [1] CAGE  
  5M-7358 [1] PLATE  
  6F-7030 [2] BOLT  
  9M-1367 [1] LOCK  
  5M-7361 [1] COVER  
  5M-7339 [1] WASHER  
  6B-0132 [1] INNER RACE AND ROLLER ASSEM.  
  9F-7283 [1] SEAL  
  0S-1591 [6] BOLT  
  3B-4506 [6] LOCKWASHER  
  1P-1941 [1] CAGE  
  9F-7283 [1] SEAL  
  9F-7283 [1] SEAL  
  9F-7378 [1] RING  
  5M-7341 [1] COVER  
  5B-2208 [2] BOLT  
  5M-7332 [1] LOCK  
  5M-7336 [1] RETAINER  
  7F-3606 [1] BUSHING  
  4H-7701 [1] BEARING ASSEM.  
  1P-5860 [1] SPACER  
  5M-7333 [1] RING  
 

#HEBP12450142
 

5M-7751: FINAL DRIVE GROUP

5M7751 FINAL DRIVE GROUP--Upper Half-Part 1
Serial No. 1Y1 to 1Y398 inclusive
c222467 HEBP1245
5M7751 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING (rubber)  
    (2 in each 5P7143 Seal Group)
  3P-7236 [2] GASKET  
  2J-5815 [2] NUT  
  5P-9177 C [4] INNER RACE  
  3P-6317 [2] LOCK  
  7H-2069 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  5P-9176 C [4] BEARING  
  0S-1585 [12] BOLT (1 75" LONG)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM (120 TEETH)  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  9S-8669 [2] INNER RACE  
  6B-5067 [2] OUTER RACE AND ROLLER ASSEM.  
  [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  5S-0192 [2] PINION (12 TEETH)  
    USE 7M7260 GASKET SOLUTION
  2P-3423 [2] PINION (10 TEETH)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (right hand)  
  9P-0567 [1] CASE (left hand)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  2P-3421 [2] RETAINER  
  2P-3422 [2] GEAR (38 TEETH)  
  C   INDICATES CHANGE
 

#HEBP12450143
 

5M-7751: FINAL DRIVE GROUP

5M7751 FINAL DRIVE GROUP--Lower Half-Part 2
Serial No. 1Y1 to 1Y398 inclusive
8P8914 Segmented Sprocket parts are shown on Page 86
c220647 HEBP1245
5M7751 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 Teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    -OR-
  5P-0374 L [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  5M-6630 [2] CAGE  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  1F-1006 [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [2] CUP  
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  1A-7486 [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 [2] HOLDER ASSEM.  
  5M-6632 [2] GASKET  
  7B-3235 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  L   NOT PART OF FINAL DRIVE AND WH
 

#HEBP12450144
 

5M-7751: FINAL DRIVE GROUP

5M7751 FINAL DRIVE GROUP--Upper Half-Part 1
Serial No. 1Y399-Up
c176947 HEBP1245
5M7751 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  0S-1589 [24] BOLT  
  3B-4510 [24] LOCKWASHER  
  5P-7143 [2] SEAL GROUP  
  5P-7145 [4] RING (rubber)  
    (2 in each 5P7143 Seal Group)
  3P-7236 [2] GASKET  
  6V-0530 C [2] NUT  
  5P-9177 [4] INNER RACE  
  7G-6986 C [2] LOCK  
  0S-1583 C [4] BOLT  
  5P-8248 C [4] WASHER  
  5P-9176 [4] BEARING  
  0S-1585 [12] BOLT (1 75" LONG)  
  3H-7654 [12] WASHER  
  2S-7603 [2] DRUM (120 TEETH)  
  3P-6318 [2] FLANGE  
  3F-1953 [2] DOWEL  
  5M-7383 [2] CAGE  
  6V-1014 C [2] INNER RACE  
  6V-1013 C [2] OUTER RACE AND ROLLER ASSEM.  
  [2] SEAL  
  3F-1953 [2] DOWEL  
  9P-0418 [2] CAGE  
  0L-1026 [4] PLUG  
  3H-4174 [2] DOWEL  
  7G-5323 C [2] PINION (12 TEETH)  
    USE 7M7260 GASKET SOLUTION
  2P-3423 [2] PINION (10 TEETH)  
  0L-1026 [2] PLUG  
  3F-1953 [2] DOWEL  
  9P-0566 [1] CASE (right hand)  
  9P-0567 [1] CASE (left hand)  
  2B-7557 [6] CORK  
  2B-8162 [6] DOWEL  
  5P-5067 [2] INNER RACE  
  5P-5066 [2] BEARING  
  2P-3421 [2] RETAINER  
  2P-3422 [2] GEAR (38 TEETH)  
  C   INDICATES CHANGE
 

#HEBP12450145
 

5M-7751: FINAL DRIVE GROUP

5M7751 FINAL DRIVE GROUP--Lower Half-Part 2
Serial No. 1Y399-Up
8P8914 Segmented Sprocket parts are shown on Page 86
c176948 HEBP1245
5M7751 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
  1P-1897 [2] GEAR (51 Teeth)  
  3B-4990 [36] BOLT  
  2K-4821 [36] LOCKNUT  
  2S-8415 [36] WASHER  
  0S-0509 [10] BOLT  
  3B-4506 [10] LOCKWASHER  
  6B-4844 [2] GUARD  
  5M-6651 R [2] HUB  
  8P-1848 [4] SEAL GROUP (std.)  
    -OR-
  5P-0374 L [4] SEAL GROUP (High Temperature)  
  2B-7906 [2] PIN  
  5M-6670 [2] SHAFT  
  1B-8742 [2] KEY  
  2B-8091 [2] RING  
  8H-3325 [2] NUT  
  9M-2744 [2] CONE  
  1M-6573 [2] CUP  
  2M-0344 [2] RING  
    (Part of 8P1848 Group)
  3N-0759 [2] RING  
    (Part of 5P374 Group)
  0S-1585 [56] BOLT (1.50 in. long)  
  2M-0849 [56] WASHER  
  1B-2886 [8] BOLT (3.75 in. long)  
  2M-0849 [8] WASHER  
  3S-9182 [2] PLUG  
  4S-6256 [2] NUT  
  6P-9609 [2] GASKET  
  7G-6042 C [2] CAGE ASSEM.  
  5M-6636 [2] SUPPORT  
  4S-6752 [2] SEAL  
  5M-6637 [2] BEARING  
  8M-6521 C [1] DOWEL  
    (Part of 5S6531 Assem.)
  4B-9374 [1] CUP  
    (1 in each 7G6042 Assem.)
  3B-8489 [2] FITTING  
  4B-9373 [2] CONE  
  2S-4365 [2] RETAINER ASSEM.  
  0S-0130 [2] PIN  
    (Part of 2S4365 Assem.)
  7F-2339 C [2] NUT  
  5M-5075 [2] CAP  
  9F-2247 [2] PLUG  
  2S-4366 [8] SHIM  
  9M-4007 [2] DOWEL  
    (Part of 5S6531 Assem.)
  5M-6628 [2] LOCK  
  5M-6631 [2] NUT  
  5S-6531 [2] HOLDER ASSEM.  
  5M-6632 [2] GASKET  
  7B-3235 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  6B-4942 [2] LOCK  
  5M-6627 [2] SEAL  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 [2] LOCK  
  8P-8914 Y [2] SPROCKET GROUP  
    (Separate Illustration)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  L   NOT PART OF FINAL DRIVE AND WH
  C   INDICATES CHANGE
 

#HEBP12450146
 

1P-1569: UNIVERSAL JOINT ASSEMBLY

1P1569 UNIVERSAL JOINT ASSEMBLY
Part of 1P1572 Flywheel Clutch Group shown on Page 76
c222577 HEBP1245
1P1569 UNIVERSAL JOINT ASSEMBLY Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1S-9670 [2] SPIDER AND BEARING ASSEM.  
2. 3H-0122 [1] FITTING  
3. 1P-1568 [1] SHAFT  
4. 3B-8486 [1] FITTING  
5. 0L-0478 [8] BOLT  
  3V-2431 C [8] WASHER  
  C   INDICATES CHANGE
 

#HEBP12450147
 

8P-8914: SEGMENTED SPROCKET GROUP

8P8914 SEGMENTED SPROCKET GROUP
Part of 5M7751 Final Drive Group shown on Pages 85 & 85B
c213004 HEBP1245
8P8914 SEGMENTED SPROCKET GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6T-4179 [5] SEGMENT-SPROCKET  
2. 3S-8182 [20] BOLT-SPROCKET  
  7H-3607 [20] NUT  
3. 8P-1851 [1] HUB AS  
4. 4F-6066 [2] GUARD-DIRT  
5. 4B-4341 [9] RIVET  
 

#HEBP12450148
 

8P-5224: POWER TRAIN OIL LINES GROUP

8P5224 POWER TRAIN OIL LINES GROUP--Part 1 of 3
3A1741 Filter and 1P1991 Pump parts are shown on Pages 90 & 91
c212722 HEBP1245
8P5224 POWER TRAIN OIL LINES GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2P-9546 [1] TUBE  
2. 8B-6127 [1] CLIP  
3. 0T-0102 [2] BOLT  
4. 3B-4506 [20] LOCKWASHER  
5. 5P-1200 E TUBE 33.35 cm(13.13 in.)  
6. 7B-1597 [1] CLIP  
7. 1F-3133 [2] GASKET  
8. 0S-1594 [7] BOLT  
9. 1P-2054 [1] TUBE ASSEM.  
10. 1A-2029 [5] BOLT  
11. 9S-9449 [1] TUBE ASSEM.  
12. 1B-8708 [1] KEY  
13. 2K-4821 [1] LOCKNUT  
  4B-4281 [1] WASHER  
14. 3S-6023 [1] GEAR (34 teeth)  
15. 1A-5964 [1] BOLT  
16. 0S-1608 [1] BOLT  
17. 3S-6024 [1] GASKET  
18. 1P-1991 Y [1] PUMP GROUP  
    (Separate Illustration)
19. 9S-9421 [1] HOSE  
20. 5P-0597 [2] CLAMP  
21. 9S-9447 [1] TUBE ASSEM.  
  8M-4390 [1] SEAL  
22. 1D-4717 [4] NUT  
23. 8P-3367 [1] BRACKET ASSEM.  
    (Includes)
24. 1F-0748 [2] NUT (weld)  
25. 0S-1595 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
26. 3S-1741 Y [1] FILTER GROUP  
    (Separate Illustration)
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#HEBP12450149
 

8P-5224: POWER TRAIN OIL LINES GROUP

8P5224 POWER TRAIN OIL LINES GROUP--Part 2 of 3
9M8669 Screen parts are shown on Page 90
c222571 HEBP1245
8P5224 POWER TRAIN OIL LINES GROUP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 0S-1590 [1] BOLT 5.08 cm(2 in.) long  
2. 1D-4717 [2] NUT  
3. 3B-4506 C [28] LOCKWASHER  
4. 8S-0481 [1] TUBE ASSEM.  
5. 1A-2029 [6] BOLT 2.85 cm(1.125 in.) long  
6. 9M-1408 [1] GASKET  
7. 9M-1448 [1] VALVE  
8. 5B-5946 [1] PLUG  
  6B-9186 [1] GASKET  
9. 5F-5523 [1] SPRING  
10. 9M-8669 Y [1] SCREEN GROUP  
    (Separate Illustration)
11. 0L-2070 [1] BOLT 2.25 in. (5.72 cm) long  
12. 0S-1608 [1] BOLT 3.75 in. (9.53cm) long  
13. 1P-2051 [1] ELBOW  
  8M-4436 [1] SEAL  
14. 9S-4181 [1] PLUG  
  7M-8485 [1] SEAL  
15. 0S-1588 C [14] BOLT  
16. 5M-2894 C [8] WASHER  
17. 1P-2052 HOSE ASSEM. 51 m(20 in.)  
18. 8M-4987 [8] SEAL  
19. 8P-3927 [1] TUBE ASSEM.  
20. 1P-4577 [4] FLANGE  
21. 0S-1591 [4] BOLT  
22. 8M-4988 [2] SEAL  
23. 0S-1571 [4] BOLT  
24. 8P-3370 [1] HOSE ASSEM. 71 m(28.03 in.)  
25. 5S-6882 [1] HOUSING ASSEM.  
    (Includes)
  6H-1810 [1] DOWEL  
26. 9M-1486 [1] TUBE ASSEM.  
27. 1S-3520 [1] GASKET  
28. 0S-1594 [2] BOLT  
29. 0L-0364 [2] LOCK  
30. 8P-3371 [1] TUBE ASSEM.  
31. 5K-3031 [1] CLIP  
32. 8S-8713 [1] CLIP  
  0T-0102 [1] BOLT  
33. 7S-1872 [1] TUBE ASSEM.  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Tool Operating Manual
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
396-6461 Tube Assembly{0374, 0599, 0632, 3030, 3258}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine
Slower Reverse Speed; New Linkage And New Shift Pattern{3060,3065,3061}
1982/05/03
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Correct Method To Shift Direct Drive Transmissions{3050,3060}
1984/11/26
All Three Transmissions Shafts Improved{3060,3063}
1986/09/29
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Solitary Letter "Z" Identifies Custom Machine Products; Two New Identification Plates Used{0336,0337,1000,3150,7000}
1989/08/14
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog D6D :

GEARSHIFT CONTROL GROUP
8P-5373 GEARSHIFT CONTROL GROUP
GEARSHIFT CONTROL GROUP
8P-5373 GEARSHIFT CONTROL GROUP
FLYWHEEL CLUTCH CONTROL GROUP
8P-5498 FLYWHEEL CLUTCH CONTROL GROUP
FLYWHEEL CLUTCH GROUP
1P-1572 FLYWHEEL CLUTCH GROUP
FLYWHEEL CLUTCH GROUP
1P-1572 FLYWHEEL CLUTCH GROUP
FLYWHEEL CLUTCH GROUP
1P-1572 FLYWHEEL CLUTCH GROUP
NEUTRAL START GROUP
7G-3946 NEUTRAL START GROUP
SOLENOID SWITCH ASSEMBLY
1P-9181 SOLENOID SWITCH ASSEMBLY
TRANSMISSION GROUP
1P-1947 TRANSMISSION GROUP
FINAL DRIVE GROUP
5M-7751 FINAL DRIVE GROUP
FINAL DRIVE GROUP
5M-7751 FINAL DRIVE GROUP
FINAL DRIVE GROUP
5M-7751 FINAL DRIVE GROUP
FINAL DRIVE GROUP
5M-7751 FINAL DRIVE GROUP
UNIVERSAL JOINT ASSEMBLY
1P-1569 UNIVERSAL JOINT ASSEMBLY
SEGMENTED SPROCKET GROUP
8P-8914 SEGMENTED SPROCKET GROUP
POWER TRAIN OIL LINES GROUP
8P-5224 POWER TRAIN OIL LINES GROUP

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT