8J3930 TILT CYLINDER ARRANGEMENT BULLDOZER SERIAL NO. 46G2133-UP AN ATTACHMENT D6D TRACK-TYPE TRACTOR



HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 19X
 D6D TRACTOR / DIRECT DRIVE / 19X00767-UP (MACHINE) POWERED BY 3306 ENGINE HEBP1327 D6D 19X   (1977)

HYDRAULIC SYSTEM

CYLINDER GP
7T-2817 CYLINDER AR-TILT
8J-3931 CYLINDER AR-TILT
8J-3930 CYLINDER AR-TILT
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
CYLINDER GP-TILT
1U-3495 CYLINDER GP-TILT
CYLINDER GP
7J-8302 CYLINDER GP
 

#HEBP13270340
 

8J-3930: CYLINDER AR-TILT

8J3930 TILT CYLINDER ARRANGEMENT
BULLDOZER SERIAL NO. 46G2133-UP
AN ATTACHMENT
HEBP13270340 HEBP1327
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
   
   
  2J-1402 Y [1] CYLINDER GROUP  
   
  2P-6053 Y [1] TILT CYLINDER LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#HEBP13270341
 

2J-1402: CYLINDER GP-HYDRAULIC

2J1402 CYLINDER GP (CHG V19)-BLADE TILT-165 MM(6.5") BORE X 127 MM
(5") STROKE
PART OF 8J3930 & 7T2817 CYLINDER ARS.-TILT
AN ATTACHMENT
c177297 HEBP1327
2J1402 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6J-0337 [ 1] CYLINDER ASSEM.  
2. 2J-8489 [ 1] BEARING  
3. 2K-0044 [ 1] ELBOW  
4. 3J-9704 [ 1] PISTON  
5. 2J-0564 [ 1] NUT  
6. 3J-9703 [ 1] RING  
7. 5J-4991 [ 1] SEAL ASSEM.  
8. 2J-1424 [ 1] ROD ASSEM.  
9. 3F-6612 [ 1] CAP  
10. 3F-6492 [ 1] BALLSTUD  
11. 2K-4472 [ 1] SEAL  
  2K-4473 [ 1] RING  
12. 3G-9912 [ 1] HEAD  
13. 1D-4709 [ 4] BOLT  
  5P-8250 C [ 4] WASHER  
14. 6J-6915 C [ 1] SEAL  
15. 2J-1411 [ 1] SEAL  
16. 5J-8300 C [ 1] SEAL  
17. 3B-4506 C [ 1] LOCKWASHER  
18. 0S-1571 [ 4] BOLT  
19. 4J-0519 C [ 1] SEAL  
20. 8J-5818 C [ 1] TUBE ASSEM.  
21. 0S-1594 [ 1] BOLT  
  1D-4717 [ 1] NUT  
  4B-4278 [ 1] WASHER  
    INDICATES CHANGE
 

#HEBP13270342
 

1U-3495: CYLINDER GP-TILT

1U3495 TILT CYLINDER GROUP (CHG. 0)-R.H. & L.H.-152 MM (6") BORE X 102MM
(4") STROKE-2 REQUIRED. PART OF 8J3931 TILT CYLINDER ARRANGEMENT LISTED ON
PAGE 193. AN ATTACHMENT
c179777 HEBP1327
1U3495 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3J-6559 [2] CAP  
2. 3J-6572 [24] SHIM  
3. 3B-2968 [8] BOLT  
4. 5P-8248 [8] WASHER  
5. 1U-3496 [1] CYLINDER ASSEM.  
    (Includes)
  7J-7816 C [1] YOKE ASSEM.  
6. 2J-3243 [1] RETAINER  
7. 5F-1678 [1] SEAL  
8. 5J-7893 [1] TUBE ASSEM.  
9. 0T-0055 [4] BOLT  
10. 5M-2894 [10] WASHER  
11. 4J-9981 [1] PISTON  
12. 0S-1594 [1] BOLT  
  1D-4717 [1] NUT  
13. 4J-4500 [1] WASHER  
14. 5J-5731 [1] NUT  
15. 7J-3169 R [1] ROD ASSEM.  
16. 0S-1571 [4] BOLT  
17. 1K-6982 [1] SEAL  
18. 4F-8421 [6] SHIM  
19. 4F-8420 [1] PACKING  
20. 5J-7889 [1] HEAD  
21. 1D-4627 [4] BOLT  
  5P-8249 [4] WASHER  
22. 5H-3252 [1] SEAL  
  2K-3258 [1] RING  
23. 5J-0014 [1] RING  
24. 5J-4989 [2] SEAL ASSEM.  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13270343
 

7J-8302: CYLINDER GP

7J8302 CYLINDER GROUP (CHG. B8)-102 MM (4") BORE X 864 MM (34") STROKE-2
REQUIRED. PART OF 3G5331, 3G5333, 3G5332 & 3G5334 BULLDOZER ARRANGEMENTS
LISTED ON PAGES 203 & 204
AN ATTACHMENT
c310206 HEBP1327
7J8302 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9J-2007 [1] PISTON AS  
2. 5J-5402 [1] SEAL AS  
3. 3B-2968 Y [4] BOLT  
  5P-8248 C [4] WASHER-HARD  
4. 7J-8295 [1] HEAD  
5. 5J-3620 [1] SEAL-RING  
6. 5P-1839 C [1] BOLT-SELF LOCKING  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING-WEAR  
8. 1H-8128 C [1] SEAL-O-RING  
9. 7J-8301 [1] CYL AS-HYD OS  
10. 4J-6374 [2] BEARING-SLEEVE  
11. 2K-6830 [1] RING-BACK-UP  
12. 7J-6461 R [1] CROWN  
13. 7J-8294 [1] ROD AS-PISTON  
14. 1K-6982 [1] SEAL-LIP TYPE  
15. 5J-0964 [1] SEAL-U-CUP  
16. 3J-6559 R [1] CAP-BEARING  
17. 3J-6572 [12] SHIM .5MM(.02IN)THK  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#HEBP13270344
 

8J-1779: CYLINDER GP-RIPPER LIFT

8J1779 CYLINDER GROUP (CHG. B5)-185 MM (7.25") BORE X 305 MM (12") STROKE
PART OF 8J7592 RIPPER ARRANGEMENT LISTED ON PAGE 212
AN ATTACHMENT
c228958 HEBP1327
8J1779 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] NUT-SELF LOCKING  
2. 8J-1772 [1] PISTON  
3. 1J-2674 [1] RING-WEAR  
4. 5J-4993 [1] SEAL AS  
5. 2K-2939 [1] SEAL-O-RING  
6. 8J-1770 [1] HEAD  
7. 2K-2940 C [1] RING-BACK-UP  
8. 5J-3620 [1] SEAL-RING  
9. 5J-0964 [1] SEAL-U-CUP  
10. 1K-6982 [1] SEAL-LIP TYPE  
11. 8J-1777 R [1] ROD AS  
12. 2K-4507 [1] BEARING-SLEEVE  
13. 1J-2814 [4] BOLT  
14. 3B-4518 [4] LOCKWASHER  
15. 4F-7391 [1] SEAL-O-RING  
16. 0S-1571 C [4] BOLT  
17. 3B-4506 [6] LOCKWASHER  
18. 8J-1769 [1] MANIFOLD AS  
19. 2K-1285 [1] CONNECTION  
20. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
21. 8J-1778 R [1] CYLINDER AS  
22. 1J-2675 [1] JUNCTION BLOCK  
23. 2K-4507 [1] BEARING-SLEEVE  
24. 1P-4577 [2] FLANGE-HALF  
25. 0S-1588 [4] BOLT  
26. 5H-4019 [1] COVER  
27. 5M-2894 C [4] WASHER  
28. 4J-0520 C [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13270345
 

8J-6868: CYLINDER GP-LIFT

8J6868 CYLINDER GP-(CHANGE 5)-PART 1 OF 2
STROKE-2 REQUIRED. 102MM (4IN) BORE X 1,050MM (41.18IN) STROKE
PART OF 1U2546 & 9W5974 BULLDOZERS
AN ATTACHMENT
c115552 HEBP1327
8J6868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8J-3648 [1] PISTON ASSEM.  
2. 8J-3645 [2] INSERT  
3. 8J-3646 [1] PLUNGER  
4. 8J-3644 [2] SPACER  
5. 8J-4578 [1] PLUNGER  
6. 7J-8287 [1] BOLT  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING  
8. 5J-5402 [1] SEAL ASSEM.  
9. 8J-6867 R [1] CYLINDER ASSEM.  
10. 4J-6374 [2] BEARING  
11. 8H-6591 [1] PLUG  
12. 7J-6461 [1] CROWN  
13. 8J-6866 R [1] ROD ASSEM.  
14. 1K-6982 [1] SEAL  
15. 5J-0964 [1] SEAL  
16. 2K-6830 [1] RING  
17. 1H-8128 [1] SEAL  
18. 5J-3620 [1] SEAL  
19. 7J-8295 [1] HEAD  
 

#HEBP13270346
 

8J-6868: CYLINDER GP-LIFT

8J6868 CYLINDER GP-(CHANGE 5)-PART 2 OF 2
STROKE-2 REQUIRED. 102MM (4IN) BORE X 1,050MM (41.18IN) STROKE
PART OF 1U2546 & 9W5974 BULLDOZERS
AN ATTACHMENT
c229311 HEBP1327
8J6868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9J-2007 C [1] PISTON ASSEM.  
2. 5J-0964 [1] SEAL  
3. 2K-6830 [1] RING  
4. 1H-8128 [1] SEAL  
5. 5J-3620 [1] SEAL  
6. 5P-1839 C [1] BOLT  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING  
8. 7J-8295 [1] HEAD  
9. 8J-6867 R [1] CYLINDER ASSEM.  
    (Includes)
10. 4J-6374 [2] BEARING  
11. 8J-5912 C [1] SCREW  
12. 7J-6461 [1] CROWN  
13. 8J-6866 R [1] ROD ASSEM.  
14. 1K-6982 [1] SEAL  
15. 3J-6559 C [1] CAP  
16. 3J-6572 C [12] SHIM  
17. 3B-2968 C [4] BOLT  
  5P-8248 C [4] LOCKWASHER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13270347
 

9J-2697: MOUNTING GP-CYLINDER

9J2697 CYLINDER MOUNTING GROUP-TYPE 1
FOR USE WITH 163 HYDRAULIC CONTROL
PART OF 3G5331 & 3G5332 BULLDOZER ARRANGEMENT LISTED ON PAGES 203 & 204
AN ATTACHMENT
c154732 HEBP1327
9J2697 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 0S-1591 [ 2] BOLT  
  1D-4717 [ 2] NUT  
2. 9J-1903 [ 2] LINK ASSEM.  
3. 3B-8485 [ 2] FITTING  
4. 2J-6305 [ 2] SEAL  
5. 4J-6326 [ 8] BEARING  
6. 5J-6161 [ 2] PIN  
7. 6J-8504 [ 1] TUBE ASSEM.  
    (Includes)
8. 2J-6316 [ 2] BEARING  
9. 2J-6306 [ 2] BEARING  
10. 0T-0199 [ 2] PLUT  
11. 0S-1595 [ 8] BOLT  
12. 3B-4508 [ 16] LOCKWASHER  
13. 5J-6162 [ 2] PLATE  
  8J-7067 [ 2] GASKET  
14. 1D-4600 [ 8] BOLT  
  4K-0367 [ 8] NUT  
  2S-5658 [ 8] WASHER  
15. 5J-6156 [ 2] YOKE  
16. 4J-6327 [ 4] CAP  
17. 3B-8489 [ 4] FITTING  
18. 2B-0947 [ 8] BOLT  
19. 2H-3788 [ 2] NUT  
  4B-4280 [ 2] WASHER  
 

#HEBP13270348
 

9J-2697: MOUNTING GP-CYLINDER

9J2697 CYLINDER MOUNTING GROUP-TYPE 2
FOR USE WITH 163 HYDRAULIC CONTROL
PART OF 3G5331 & 3G5332 BULLDOZER ARRANGEMENTS LISTED ON PAGES 203 & 204.
AN ATTACHMENT
c303425 HEBP1327
9J2697 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 0S-1591 [2] BOLT  
  1D-4717 [2] NUT  
2. 9J-1903 [2] LINK ASSEM.  
3. 3B-8485 [2] FITTING  
4. 2J-6305 [2] SEAL  
5. 4J-6326 [4] BEARING  
6. 5J-6161 [2] PIN  
7. 6J-8504 [1] TUBE ASSEM.  
    (Includes)
8. 2J-6316 [2] BEARING  
9. 2J-6306 [2] BEARING  
10. 0T-0199 [2] PLUG  
11. 0S-1595 [8] BOLT  
12. 3B-4508 [16] LOCKWASHER  
13. 5J-6162 [2] PLATE  
  8J-7067 [2] GASKET  
14. 1D-4600 [8] BOLT  
  4K-0367 [8] NUT  
  2S-5658 [8] WASHER  
15. 5J-6156 [2] YOKE  
16. 4J-6327 [4] CAP  
17. 3B-8489 [4] FITTING  
18. 2B-0947 [8] BOLT  
19. 2H-3788 [2] NUT  
  4B-4280 [2] WASHER  
 

#HEBP13270349
 

6J-6180: BRACKET GP-CYLINDER

6J6180 CYLINDER BRACKET GROUP-TYPE 1
PART OF 3G5333 & 3G5334 BULLDOZER ARRANGEMENT LISTED ON PAGES 203 & 204
AN ATTACHMENT
c210543 HEBP1327
6J6180 BRACKET GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2J-6305 [ 2] SEAL  
2. 3B-8485 [ 2] FITTING  
3. 0S-1591 C [ 2] BOLT  
4. 9J-1903 C [ 2] LINK ASSEM.  
5. 4B-4280 C [ 2] WASHER  
6. 2J-3207 [ 2] PIN  
7. 2H-3788 C [ 2] NUT  
8. 6J-8504 [ 1] TUBE ASSEM.  
    (Includes)
9. 2J-6316 [ 2] BEARING  
10. 2J-6306 [ 2] BEARING  
11. 0T-0199 [ 2] PLUG  
12. 5J-6156 [ 2] YOKE  
13. 4J-6326 [ 8] BEARING  
14. 4J-6327 [ 4] CAP  
15. 2B-0947 [ 8] BOLT  
16. 3B-4508 [ 16] LOCKWASHER  
17. 8A-7762 [ 2] BRACKET  
18. 0S-1571 [ 4] BOLT  
19. 8A-7763 [ 2] PLATE  
20. 5J-6162 [ 2] PLATE  
21. 0S-1595 [ 8] BOLT  
22. 5J-6161 [ 2] PIN  
23. 1D-4600 [ 8] BOLT  
  4K-0367 [ 8] NUT  
  2S-5658 [ 8] WASHER  
24. 3B-8489 [ 4] FITTING  
25. 8J-7067 C [ 2] GASKET  
26. 1D-4717 C [ 6] NUT  
    INDICATES CHANGE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6D :

8J-3931 CYLINDER AR-TILT
7T-2817 CYLINDER AR-TILT
LINES GP-TILT CYLINDER
7T-2299 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
2P-6054 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
2P-6053 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0477 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0477 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0477 LINES GP-TILT CYLINDER
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
CYLINDER GP-TILT
1U-3495 CYLINDER GP-TILT
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-RIPPER LIFT
8J-1779 CYLINDER GP-RIPPER LIFT
CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
MOUNTING GP-CYLINDER
9J-2697 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
9J-2697 MOUNTING GP-CYLINDER

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT