6P6095 HYDRAULIC CYLINDER ARRANGEMENT FOR USE WITH OTHER THAN CATERPILLAR BUILT TOOL BARS. AN ATTACHMENT D6D

7J7974 TOOL BAR CYLINDER GROUP-25.4 MM (4") BORE X 406.4 MM (16") STROKE
2 REQUIRED. PART OF 6P6095 HYDRAULIC CYLINDER ARRANGEMENT LISTED ON
PAGE 158. AN ATTACHMENT

c307658 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7J-5639	[1]	BOLT
2.	7J-7975 R	[1]	CYLINDER ASSEM.
3.	5H-9394	[1]	BOSS
			(Part of 7J7975 Assem.)
4.	1H-8128	[1]	SEAL
5.	8J-7415 C	[1]	WASHER
6.	2K-6830	[1]	RING
7.	7J-7983	[1]	HEAD
8.	4J-8979	[1]	SEAL
9.	7J-7977 R	[1]	ROD ASSEM.
10.	7J-7984	[1]	CROWN
11.	5J-8150	[1]	SEAL
12.	6J-9733	[1]	SEAL
13.	7J-6084	[1]	PISTON
14.	5J-5402	[1]	SEAL ASSEM.
15.	5J-7154	[1]	RING
	C		INDICATES CHANGE
	R		REMFG PART MAY BE AVAILABLE

#HEBP13280282

9G-5880: GAUGE GP

GAUGE GP

9G5880 GAUGE GROUP-PART 1

c230857 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6K-0806	[1]	STRAP
2.	8P-4956	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 D		WIRE .63 m(24.8 in.)
	5P-4571	[1]	CONNECTOR
3.	2L-8076	[1]	TERMINAL
4.	6P-5759	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 D		WIRE .15 m(6 in.)
	2S-5012	[1]	CAP
	2S-5014	[1]	CONTACT
5.	2L-8076	[1]	TERMINAL
6.	9G-8010	[1]	SWITCH ASSEM. (pressure)
	5P-3741	[1]	TEE
7.	6L-3616	[1]	CONNECTOR
8.	5F-9757	[1]	GROMMET
9.	2D-5833	[1]	BRACKET
10.	0S-1594	[2]	BOLT
	1D-4717	[2]	NUT
	3B-4506	[2]	LOCKWASHER
11.	1S-9389	[1]	CABLE ASSEM.
12.	8M-2770	[2]	CLIP
13.	5P-1198 E		TUBE 19 cm(7.48 in.)
14.	4B-8756	[2]	NUT
15.	8P-9364	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 D		WIRE .15 m(6 in.)
	5P-5694	[1]	CONNECTOR
16.	2L-8079	[1]	TERMINAL
17.	8N-7813	[1]	GAUGE (fuel pressure)
	6K-6967	[1]	ADAPTER
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

#HEBP13280283

9G-5880: GAUGE GP

GAUGE GP

9G5880 GAUGE GROUP-PART 2

c230858 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2D-2751	[2]	GROMMET
2.	9S-7703	[1]	ELBOW
3.	9G-7514	[1]	TUBE ASSEM.
4.	1C-0569	[3]	BOLT
5.	5M-1065	[1]	INDICATOR (oil pressure)
6.	3S-4824	[1]	INDICATOR (water temperature)
7.	6N-5906	[1]	HOUR METER
8.	9G-3009	[1]	PANEL
9.	7B-3028	[6]	DRIVE SCREW
10.	6K-0806	[4]	STRAP
11.	9M-1974	[3]	WASHER
12.	1H-5166	[3]	CLIP
13.	6H-6699	[1]	ADAPTER
14.	8P-9365	[1]	WIRE ASSEM.
			(Includes)
	5P-5624 D		WIRE .15 m(6 in.)
15.	2L-8076	[1]	TERMINAL
16.	2S-5011	[1]	BODY
	2S-5013	[1]	SPRING
	2S-5014	[1]	CONTACT
17.	2S-6024	[1]	FUSE
18.	5K-9242	[1]	UNION
19.	1P-3389	[1]	INDICATOR (tachometer)
20.	5K-9241	[1]	ELBOW
21.	9G-6473	[1]	TUBE ASSEM.
22.	1V-3113	[1]	CLIP (small)
23.	8M-2771	[1]	CLIP (large)
	0S-1615	[1]	BOLT
	1B-4330	[1]	NUT
	3B-4504	[1]	LOCKWASHER
	D		ORDER BY THE METER

#HEBP13280284

9G-6074: ROPS GP

ROPS GP

9G6074 ROLL-OVER PROTECTIVE STRUCTURE GROUP-OPEN
9P9392 MIRROR PARTS ARE SHOWN ON PAGE 169. AN ATTACHMENT

c230094 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8P-8299	[2]	GRABIRON
2.	0S-1621	[12]	BOLT
	3B-4508	[12]	LOCKWASHER
	4B-4280	[12]	WASHER
3.	9P-7853	[4]	GRABIRON
4.	9P-9392 Y	[1]	MIRROR GROUP
			(Separate Illustration)
5.	9G-6868	[1]	ROLLOVER ASSEM.
	6V-3245 CF	[1]	PLATE (ROPS Certification)
	6V-3254 CF	[1]	PLATE (Identification)
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION
	F		NOT SHOWN

#HEBP13280285

9G-6854: ROPS GP

ROPS GP

9G6854 ROPS GP-PART 1 OF 3
TYPE 1
PART OF 9G6870 ROPS AR
AN ATTACHMENT

c229326 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2714 C	[2]	HANDLE ASSEM.
			(Each Includes)
	5K-4340	[1]	KEY
2.	8P-3326	[1]	GLASS
3.	0S-1615	[6]	BOLT
4.	9P-1395	[1]	COVER ASSEM. (R.H.)
	9P-1396	[1]	COVER ASSEM. (L.H.)
5.	6V-1841 C	[8]	SCREW
6.	9G-6827	[1]	CAB ASSEM.
7.	9N-0869	[4]	WASHER
8.	8P-3325	[1]	GLASS
9.	9G-6865	[1]	DOOR ASSEM.
			(Includes)
	9D-6621 C	[2]	NUT
10.	5P-5768 D		SEAL (Use as required)
11.	4H-3521	[2]	SPRING
12.	8P-4069	[1]	GLASS
13.	6V-1637	[2]	HANDLE ASSEM.
14.	9P-0436	[2]	LEVER ASSEM.
15.	1K-6705 C	[13]	BOLT
16.	6V-1155	[2]	STRIKER ASSEM.
17.	0S-1616	[4]	BOLT
18.	4B-4276	[6]	WASHER
19.	9P-1145	[2]	PLATE
	9P-1200	[6]	SHIM 1.9 mm(.074 in.)
20.	8P-3327	[2]	PLATE
21.	5P-5747 D		SEAL 2.6m(102.36 in.)
22.	7B-2742	[8]	BOLT
	2D-6235	[8]	LOCKNUT
23.	6V-3295	[1]	LATCH (R.H.)
	6V-3296	[1]	LATCH (L.H.)
24.	3B-4504	[10]	LOCKWASHER
25.	9P-6894	[2]	LEVER
	9P-6895	[4]	PIN
	3B-5311	[4]	COTTER PIN
	6V-0888 F	[1]	FILM (Instruction)
			(Film to be placed next to exterior door handles)
	C		INDICATES CHANGE
	F		NOT SHOWN
	D		ORDER BY THE METER

#HEBP13280286

9G-6854: ROPS GP

ROPS GP

9G6854 ROPS GP-PART 2 OF 3
TYPE 1
PART OF 9G6870 ROPS AR
AN ATTACHMENT

c229337 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8P-9736	[1]	DOOR ASSEM. (L.H.)
	8P-9779	[1]	DOOR ASSEM. (R.H.)
	8P-9588	[4]	SHIM (Use as required)
2.	4D-6082	[2]	BOLT
	4B-4280	[2]	WASHER
3.	3B-4610	[4]	COTTER PIN
4.	0L-1351	[4]	BOLT
	4B-4278	[4]	WASHER
5.	8P-9591	[1]	ARM ASSEM. (L H.)
	8P-9594	[1]	ARM ASSEM. (R.H.)
6.	8P-4069	[1]	GLASS
7.	5P-5768 D		SEAL (use as required)
8.	9M-5884	[8]	BUMPER
9.	016-7150	[3]	SCREW
10.	9G-6856	[1]	ANGLE
11.	5P-5640 D		SEAL 2.9 m(114.11 in.)
12.	1B-2713	[18]	BOLT
	7H-8909	[16]	LOCKNUT
	4B-4276	[18]	WASHER
	8M-2337	[16]	WASHER
13.	8P-3326	[1]	GLASS
14.	9G-6857	[1]	DOOR ASSEM.
			(Includes)
	9D-6621 C	[2]	NUT
15.	8P-3325	[1]	GLASS
16.	5P-5747 D		SEAL 1.25 m(49.22 in.)
17.	7D-6921	[8]	SCREW
	8F-8052	[8]	LOCKWASHER
18.	9P-7845	[8]	SHIM 1.6mm(.063 in. thick)
	9P-7846	[8]	SHIM .8 mm(.031 in. thick)
19.	9P-1811	[1]	COVER
	9P-1810	[1]	GASKET
20.	0S-0509	[2]	BOLT
21.	9P-7844	[4]	PLATE
22.	3B-4506	[6]	LOCKWASHER
	C		INDICATES CHANGE
	D		ORDER BY THE METER

#HEBP13280287

9G-6854: ROPS GP

ROPS GP

9G6854 ROPS GP-PART 3 OF 3
TYPE 1
PART OF 9G6870 ROPS AR
AN ATTACHMENT

c228569 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1594	[3]	BOLT 2.54 cm (1 in.) long
2.	1D-4717	[3]	NUT
3.	3B-4506	[3]	LOCKWASHER
4.	5P-7518	[2]	RETAINER
5.	5P-7519	[2]	NUT
6.	5P-9034	[2]	STUD
7.	8P-3142	[3]	BRACKET ASSEM.
8.	8L-6521	[5]	BOLT
	4B-2049	[5]	NUT
	3B-4502	[5]	LOCKWASHER
	4B-4274	[10]	WASHER
9.	5P-4115	[14]	LOCKWASHER
10.	5P-5768 D		SEAL (use as required)
11.	8P-3762	[1]	GLASS
12.	9G-6855	[1]	DOOR
13.	8P-3763	[1]	GLASS
14.		[1]	PLATE
	8P-3881	[1]	GASKET
15.	068-7624	[14]	SCREW
16.	9P-9385	[1]	WINDOW ASSEM.
			(Includes)
	9P-9387	[1]	GLASS
17.	5P-8918 D		SEAL 1.3 m(51.19 in.)
18.	5P-5680 D		SEAL 2.54 m(100 in.)
19.	2H-6622	[2]	SCREW
20.	9P-7860	[1]	LOCK ASSEM.
	9P-7859	[2]	SCREW
21.	9G-8808	[1]	COVER
	5P-7924	[3]	SCREW
	6V-3247 F	[1]	PLATE (Identification)
	6V-3245 F	[1]	PLATE (ROPS Warning)
	034-7044 F	[6]	RIVET
	D		ORDER BY THE METER-USE AS REQU
	F		NOT SHOWN

#HEBP13280288

9G-6854: ROPS GP

ROPS GP

9G6854 ROPS GP-PART 1 OF 3
TYPE 2
PART OF 9G6870 ROPS AR
AN ATTACHMENT

c414348 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-2714	[2]	HANDLE AS
			(EACH INCLUDES)
	5K-4340	[2]	KEY-LOCK CYLINDER
2.	8P-3326	[1]	GLASS
3.	0S-1615	[6]	BOLT
4.	9P-1395	[1]	COVER AS (R.H.)
	9P-1396	[1]	COVER AS (L.H.)
5.	6V-1841	[4]	SCREW-MACHINE
6.	3B-5311	[4]	COTTER
7.	9N-0869	[4]	WASHER
8.	8P-3325	[1]	GLASS
9.	9G-6865	[1]	DOOR AS
	9D-6621	[2]	NUT-WELD
10.	5P-5768 BD		SEAL
11.	4H-3521	[2]	SPRING
12.	8P-4069	[1]	GLASS
13.	6V-1637	[2]	HANDLE AS-INSIDE
14.	9P-0436	[2]	LEVER
15.	1K-6705	[13]	BOLT
16.	6V-1155	[2]	STRIKER AS
17.	4F-7957	[4]	BOLT
18.	4B-4276	[6]	WASHER
19.	9P-1145	[2]	PLATE-STRIKER
	9P-1200	[6]	SHIM 1.9MM(.074IN)THK
20.	8P-3327	[2]	PLATE
21.	5P-5747 BD		SEAL
22.	7B-2742	[8]	BOLT
	2D-6235	[8]	LOCKNUT
23.	6V-6777 C	[1]	LATCH AS-DOOR (R.H.)
	6V-6778 C	[1]	LATCH AS-DOOR (L.H.)
24.	3B-4504	[10]	LOCKWASHER
25.	9P-6894	[2]	LEVER
	9P-6895	[4]	PIN
26.	4M-0190	[4]	SCREW-MACHINE
27.	9G-6827	[1]	CAB AS
28.	3T-2940	[2]	DUCT
	6V-0888 F	[1]	FILM-INSTRUCTION
			(TO BE PLACED NEXT TO
			EXTERIOR DOOR HANDLES)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	F		NOT SHOWN

#HEBP13280289

9G-6854: ROPS GP

ROPS GP

9G6854 ROPS GP-PART 2 OF 3
TYPE 2
PART OF 9G6870 ROPS AR
AN ATTACHMENT

c450957 HEBP1328

For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-2762	[1]	DOOR AS (L.H.)
	3T-2761	[1]	DOOR AS (R.H.)
	061-8803 B	[8]	SHIM
2.	4D-6082	[2]	BOLT
	4B-4280	[2]	WASHER
3.	3B-4610	[6]	COTTER
4.	0L-1351	[4]	BOLT
	5P-1075	[4]	WASHER-HARD
5.	3T-2675	[1]	ARM AS (L.H.)
	3T-2676	[1]	ARM AS (R.H.)
6.	8P-4069	[1]	GLASS
7.	5P-5768 BD		SEAL
8.	9M-5884	[8]	BUMPER
9.	016-7150	[3]	SCREW
10.	9G-6856	[1]	ANGLE
11.	5P-5640 BD		SEAL
12.	1B-2713	[18]	BOLT
	7H-8909	[16]	LOCKNUT
	4B-4276	[18]	WASHER (THIN)
	8M-2337	[16]	WASHER (THICK)
13.	8P-3326	[1]	GLASS
14.	9G-6857	[1]	DOOR AS
	9D-6621	[2]	NUT-WELD
15.	8P-3325	[1]	GLASS
16.	5P-5747 BD		SEAL
17.	7D-6921	[8]	SCREW-FLAT HEAD
	8F-8052	[8]	LOCKWASHER-TOOTH
18.	9P-7845	[8]	SHIM 1.6MM(.063IN)THK
	9P-7846	[8]	SHIM .8MM(.031IN)THK
19.	9P-1811	[1]	COVER
20.	0S-0509	[2]	BOLT
21.	9P-7844	[4]	PLATE
22.	3B-4506	[2]	LOCKWASHER
23.	6V-2768 BD		SEAL
	B		USE AS REQUIRED
	D		ORDER BY THE METER

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked
The 3J2452 Ball Joint Cap On Certain 0R1308 Remanufactured Cylinder Rods Needs To Be Reworked

Bench Test Procedures

Service Magazine

New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6D :

8P-4639 CONTROL & MOUNTING GP

6T-6993 FILTER GP-OIL

7L-6925 FILTER AS-OIL

9J-1212 FILTER GP-OIL

9P-8812 LINES GP-PUMP

7J-7974 CYLINDER GP-LIFT

9G-5880 GAUGE GP

9G-6074 ROPS GP

9G-6854 ROPS GP

Truck sale:

Caterpillar D6D
- Crawler dozers
HOLT CAT

Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.

25,000

Caterpillar D6D, Crawler dozers, Construction

59,000

Caterpillar D6D, Crawler dozers, Construction

22,417

Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT