AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J1779 CYLINDER GROUP-(CHANGE B0-B5)-185 MM (7.25 IN.) BORE X 305 MM (12 IN.) STROKE. PART OF 9J6699 RIPPER ARRANGEMENT LISTED ON PAGE 230 AN ATTACHMENT D5B


HYDRAULIC SYSTEM
CYLINDER GP
IMPLEMENTS
LINKAGE GP

TRACK-TYPE TRACTOR D5B TRACK-TYPE TRACTOR 43X
 D5B TRACTOR / DIRECT DRIVE / 43X00722-UP (MACHINE) POWERED BY 3306 ENGINE HEBP1331 D5B 43X   (1978)

HYDRAULIC SYSTEM

CYLINDER GP
1U-0654 CYLINDER AR-TILT
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
7J-8299 CYLINDER GP-HYDRAULIC
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-RIPPER LIFT
8J-1779 CYLINDER GP-RIPPER LIFT
MOUNTING GP-CYLINDER
8J-2895 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
6J-8500 MOUNTING GP-CYLINDER
BRACKET GP-CYLINDER
5J-9210 BRACKET GP-CYLINDER
BRACKET GP-CYLINDER
5J-9210 BRACKET GP-CYLINDER
 

#HEBP13310430
 

8J-1779: CYLINDER GP-RIPPER LIFT

8J1779 CYLINDER GROUP-(CHANGE B0-B5)-185 MM (7.25 IN.) BORE X 305 MM
(12 IN.) STROKE. PART OF 9J6699 RIPPER ARRANGEMENT LISTED ON PAGE 230
AN ATTACHMENT
c228958 HEBP1331
8J1779 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-0564 [1] NUT-SELF LOCKING  
2. 8J-1772 [1] PISTON  
3. 1J-2674 [1] RING-WEAR  
4. 5J-4993 [1] SEAL AS  
5. 2K-2939 [1] SEAL-O-RING  
6. 8J-1770 [1] HEAD  
7. 2K-2940 C [1] RING-BACK-UP  
8. 5J-3620 [1] SEAL-RING  
9. 5J-0964 [1] SEAL-U-CUP  
10. 1K-6982 [1] SEAL-LIP TYPE  
11. 8J-1777 R [1] ROD AS  
12. 2K-4507 [1] BEARING-SLEEVE  
13. 1J-2814 [4] BOLT  
14. 3B-4518 [4] LOCKWASHER  
15. 4F-7391 [1] SEAL-O-RING  
16. 0S-1571 C [4] BOLT  
17. 3B-4506 [6] LOCKWASHER  
18. 8J-1769 [1] MANIFOLD AS  
19. 2K-1285 [1] CONNECTION  
20. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
21. 8J-1778 R [1] CYLINDER AS  
22. 1J-2675 [1] JUNCTION BLOCK  
23. 2K-4507 [1] BEARING-SLEEVE  
24. 1P-4577 [2] FLANGE-HALF  
25. 0S-1588 [4] BOLT  
26. 5H-4019 [1] COVER  
27. 5M-2894 C [4] WASHER  
28. 4J-0520 C [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13310431
 

8J-2895: MOUNTING GP-CYLINDER

8J2895 CYLINDER MOUNTING GROUP
AN ATTACHMENT
c306245 HEBP1331
8J2895 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [8] BOLT  
2. 3B-4508 [16] LOCKWASHER  
3. 4J-6327 [4] CAP  
4. 5J-6161 [2] PIN  
5. 6J-8499 [1] TUBE AS  
6. 5J-6159 [1] HOUSING AS-RH (R.H.)  
7. 0T-0199 [1] PLUG-CUP  
8. 2J-6306 [1] BEARING-SLEEVE  
9. 2J-6316 [1] BEARING-SLEEVE  
10. 5J-6160 [1] HOUSING AS-LH (L.H.)  
11. 0T-0199 [1] PLUG-CUP  
12. 2J-6306 [1] BEARING-SLEEVE  
13. 2J-6316 [1] BEARING-SLEEVE  
14. 3B-8485 [2] FITTING-HYDRAULIC  
15. 8J-7067 [2] GASKET  
16. 3B-8489 [4] FITTING-GREASE  
17. 2J-6305 [2] SEAL-OIL  
18. 4J-6326 C [8] BEARING-HALF  
19. 5J-6162 [2] PLATE  
20. 0S-1595 [8] BOLT  
21. 1D-4600 [8] BOLT  
  4K-0367 [8] NUT  
  2S-5658 [8] WASHER-HARD  
22. 5J-6156 [2] YOKE  
23. 0T-0772 [2] BOLT  
  1D-4718 [2] NUT-FULL  
24. 9J-1903 [2] LINK AS  
25. 2H-3788 [2] NUT-SELF LOCKING  
  4B-4280 [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP13310432
 

6J-8500: MOUNTING GP-CYLINDER

6J8500 CYLINDER MOUNTING GROUP
PART OF 8J3463 & 8J4757 BULLDOZER ARRANGEMENTS LISTED ON PAGES 219 & 220
c209341 HEBP1331
6J8500 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [8] BOLT  
2. 3B-4508 [16] LOCKWASHER  
3. 1P-9191 H [1] FAN GUARD ASSEM.  
4. 8A-8084 C [2] PIN  
5. 3B-8489 C [4] FITTING  
6. 6J-8499 [1] TUBE ASSEM.  
    (Includes)
7. 0T-0199 [2] PLUG  
8. 2J-6306 [2] BEARING  
9. 2J-6316 [2] BEARING  
10. 2J-6305 [2] SEAL  
11. 5J-6156 [2] YOKE  
12. 4J-6327 [4] CAP  
  4J-6326 [8] BEARING  
13. 1D-4600 [8] BOLT  
  4K-0367 [8] NUT  
  2S-5658 [8] WASHER  
14. 0S-1571 [4] BOLT  
  1D-4717 [4] NUT  
15. 8A-7762 C [2] BRACKET  
16. 5J-6161 [2] PIN  
17. 5J-6162 [2] PLATE  
18. 0S-1595 [8] BOLT  
19. 9J-1903 C [2] LINK ASSEM.  
20. 0T-0772 [2] BOLT  
  1D-4718 [2] NUT  
21. 2H-3788 [2] NUT  
  4B-4280 [2] WASHER  
22. 8J-7067 C [2] GASKET  
23. 3B-8485 C [2] FITTING  
  C   INDICATES CHANGE
  H   NOT PART OF 6J8500 MOUNTING GROUP
 

#HEBP13310433
 

5J-9210: BRACKET GP-CYLINDER

5J9210 CYLINDER BRACKET GROUP-TYPE 1
AN ATTACHMENT
c304503 HEBP1331
5J9210 BRACKET GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [8] BOLT  
2. 3B-4508 [16] LOCKWASHER  
3. 4J-6327 [4] CAP  
4. 5J-6161 [2] PIN  
5. 5J-6156 [2] YOKE  
6. 3B-8489 [4] FITTING-GREASE  
7. 8J-7067 C [2] GASKET  
8. 3J-6572 C [24] SHIM .5MM(.02IN)THK  
9. 3B-2968 C [8] BOLT  
  3B-4512 C [8] LOCKWASHER  
10. 2H-3788 [2] NUT-SELF LOCKING  
  4B-4280 [2] WASHER  
11. 9J-1903 C [2] LINK AS  
12. 0T-0772 [2] BOLT  
  1D-4718 [2] NUT-FULL  
13. 5J-6162 [2] PLATE  
14. 0S-1595 [8] BOLT  
15. 4J-6326 [8] BEARING-HALF  
16. 2J-6305 [2] SEAL-OIL  
17. 3J-6559 C [2] CAP-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP13310434
 

5J-9210: BRACKET GP-CYLINDER

5J9210 CYLINDER BRACKET GROUP-TYPE 2
AN ATTACHMENT
c310203 HEBP1331
5J9210 BRACKET GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [8] BOLT  
2. 3B-4508 [16] LOCKWASHER  
3. 4J-6327 C [4] CAP  
4. 5J-6161 [2] PIN  
5. 5J-6156 [2] YOKE  
6. 3B-8489 [4] FITTING-GREASE  
7. 8J-7067 [2] GASKET  
8. 2H-3788 [2] NUT-SELF LOCKING  
  4B-4280 [2] WASHER  
9. 3Y-7923 [2] LINK AS  
10. 0T-0772 [2] BOLT  
  1D-4718 [2] NUT-FULL  
11. 5J-6162 C [2] PLATE  
12. 0S-1595 [8] BOLT  
13. 4J-6326 [4] BEARING-HALF (EACH BEARING  
    CONSISTS OF 2 HALVES)
14. 2J-6305 [2] SEAL-OIL  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP13310435
 

8P-5040: LINKAGE GP-IMPLEMENT

8P5040 IMPLEMENT LINKAGE GROUP
PART OF 8P3072 & 8P3073 HYDRAULIC CONTROL ARRANGEMENTS LISTED ON PAGE 180
AN ATTACHMENT
c461397 HEBP1331
8P5040 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-0952 [1] CLAMP  
2. 3J-1545 [1] ROD  
3. 0L-0829 [1] HANDLE  
4. 3B-1915 [1] BOLT  
5. 1D-4717 [6] NUT  
6. 0S-1571 [1] BOLT  
7. 0L-1143 [4] BOLT  
8. 3B-4506 [6] LOCKWASHER  
9. 1J-8490 [1] ROD-CONTROL  
10. 1B-0676 [2] PIN  
  3B-4615 [2] PIN-COTTER  
11. 5B-9079 [1] NUT-JAM  
12. 1A-2029 [2] BOLT 28.58MM(1.125IN)LG  
    -OR-
  0S-1588 C [2] BOLT 31.75MM(1.25IN)LG  
  4B-4278 C [2] WASHER  
13. 1J-6239 [1] BALL BEARING AS  
14. 1F-5403 [1] END-ADJUSTABLE ROD  
15. 8P-7043 [1] SUPPORT  
16. 5J-8135 [1] SHAFT AS  
17. 4B-4279 [4] WASHER  
   
  5P-0532 F [1] FILM-INSTRUCTION  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

#HEBP13310436
 

8P-5692: LINKAGE GP-IMPLEMENT

8P5692 IMPLEMENT LINKAGE GROUP-BULLDOZER AND TILT-TYPE 1
PART OF 8P3071 AND 8P3073 CONTROLS
AN ATTACHMENT
c215721 HEBP1331
8P5692 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [ 1] HANDLE  
2. 8P-2480 [ 1] LEVER  
3. 6P-5205 [ 1] BRACKET ASSEM.  
    (Includes)
  9F-5647 [ 2] BEARING  
4. 8P-7352 [ 1] SEAL  
5. 6P-5209 [ 1] COVER  
  4B-1291 [ 4] SCREW  
6. 9P-0468 [ 1] CLAMP  
7. 8P-2481 [ 1] LEVER ASSEM.  
8. 2J-7295 [ 1] SPRING  
9. 6P-5208 [ 1] GUIDE  
10. 0S-1591 [ 1] BOLT  
11. 1D-4717 [ 3] NUT  
12. 5B-9079 [ 2] NUT  
13. 5J-5315 [ 2] ROD END  
14. 2L-6267 [ 2] LOCKNUT  
15. 4D-4065 [ 1] ROD END  
16. 1B-4205 [ 4] NUT  
17. 8P-3391 [ 1] ROD ASSEM.  
    (Includes)
18. 1B-4205 [ 1] NUT  
19. 2M-8340 [ 1] ROD END  
20. 8P-2479 [ 1] ROD  
21. 8P-2496 [ 1] LEVER  
22. 6D-3787 [ 8] BEARING  
23. 0S-0175 [ 5] PIN  
  3B-4617 [ 5] COTTER PIN  
24. 8P-2495 [ 1] LEVER  
25. 6F-7010 [ 3] ROD END  
26. 8P-5327 [ 1] ROD ASSEM.  
    (Includes)
  1B-4205 [ 1] NUT  
  4D-4065 [ 1] ROD END  
  8P-5329 [ 1] ROD ASSEM.  
    (Includes)
  1B-4205 [ 1] NUT  
  4D-4065 [ 1] ROD END  
28. 1K-6872 [ 2] LOCKNUT  
29. 3B-4508 [ 5] LOCKWASHER  
30. 8P-5333 [ 1] BRACKET ASSEM.  
31. 2P-8145 [ 2] BELLCRANK  
32. 0L-1351 [ 1] BOLT  
  8M-4069 [ 1] WASHER  
33. 1D-4719 [ 5] NUT  
34. 5J-5326 [ 1] WASHER  
35. 0S-1587 [ 4] BOLT  
36. 0S-1571 [ 2] BOLT  
37. 3P-3937 [ 1] SHAFT  
38. 8P-5325 [ 1] ROD ASSEM.  
    (Includes)
  4D-4065 [ 1] ROD END  
  1B-4205 [ 1] NUT  
39. 8P-5331 [ 1] ROD ASSEM.  
    (Includes)
  1B-4205 [ 2] NUT  
  4D-4065 [ 1] ROD END  
40. 2M-8340 [ 1] ROD END  
41. 1A-2029 [ 4] BOLT  
  4B-4278 [ 4] WASHER  
42. 3B-4506 [ 5] LOCKWASHER  
43. 0S-1573 [ 1] BOLT  
44. 8P-2483 [ 1] LEVER  
45. 5S-9704 [ 2] SHAFT  
  1D-4720 [ 2] NUT  
  3B-4510 [ 2] LOCKWASHER  
46. 2H-3855 [ 2] BOLT  
  1J-8965 [ 2] WASHER  
47. 3P-3935 [ 1] SHAFT ASSEM.  
  1B-8704 [ 1] KEY  
48. 7L-0811 [ 1] PIN  
49. 1A-1460 H [ 2] BOLT 1.91 cm(.75 in.)  
    - OR -
  0S-1622 H [ 2] BOLT 1.27 cm(.5 in.)  
50. 3S-3158 C [ 1] PIPE  
    SHOULDER LENGTH-USE AS REQUI
    INDICATES CHANGE
 

#HEBP13310437
 

8P-5692: LINKAGE GP-IMPLEMENT

8P5692 IMPLEMENT LINKAGE GROUP-BULLDOZER AND TILT-TYPE 2
PART OF 8P3071 AND 8P3073 CONTROLS
AN ATTACHMENT
c340077 HEBP1331
8P5692 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 6P-5205 [1] BRACKET AS  
  9F-5647 [2] BEARING  
4. 8P-7352 [1] SEAL-DOMED  
5. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW-MACHINE  
6. 9P-0468 [1] CLAMP  
7. 8P-2481 [1] LEVER AS  
8. 2J-7295 [1] SPRING  
9. 6P-5208 [1] GUIDE-CONTROL  
10. 0S-1591 [1] BOLT  
11. 1D-4717 [3] NUT  
12. 3B-8489 C [2] FITTING-GREASE  
13. 6V-2761 C [4] BOOT-ROD END  
14. 6V-2762 C [8] SPACER  
15. 5D-0353 C [1] BOLT-SELF LOCKING  
16. 030-8538 C [1] BOLT  
17. 6T-1442 C [1] ROD AS  
18. 1B-4430 [2] NUT-JAM  
19. 4D-4065 [2] ROD END-BEARING  
20. 6T-1444 C [1] ROD AS  
21. 5B-9079 [2] NUT-JAM  
22. 5J-5315 [1] ROD END  
23. 4D-4064 [1] ROD END  
24. 7T-0215 C [1] LEVER AS  
25. 8P-2496 [1] LEVER  
26. 7T-0213 C [1] ROD AS  
  1B-4430 [2] NUT-JAM  
  4D-4065 [2] ROD END-BEARING  
27. 7T-0216 C [1] ROD AS  
  1B-4430 [2] NUT-JAM  
  4D-4065 [2] ROD END-BEARING  
28. 1K-6872 C [7] LOCKNUT  
29. 5P-8245 C [7] WASHER 2.55CM(1IN.)O.D.  
30. 8P-5333 [1] BRACKET AS  
31. 9G-8854 C [2] BELLCRANK  
32. 0S-1594 C [1] BOLT  
  8M-4069 [1] WASHER 3.81CM(1.5IN.)O.D.  
33. 6D-5974 C [4] BEARING-ROLLER  
34. 5J-5326 [1] WASHER  
35. 0S-1587 C [8] BOLT  
36. 0S-1571 [2] BOLT  
37. 3P-3937 [1] SHAFT  
38. 6T-1456 C [1] ROD AS  
  4D-4065 [2] ROD END-BEARING  
  1B-4430 [2] NUT-JAM  
39. 6T-1458 C [1] ROD AS  
  1B-4430 [2] NUT-JAM  
  4D-4065 [2] ROD END-BEARING  
40. 3S-3158 [1] PIPE  
41. 0S-1588 C [4] BOLT  
  5M-2894 C [4] WASHER  
42. 8M-9124 C [1] WASHER 2.25CM(.88IN.)O.D.  
43. 0S-1573 [1] BOLT  
44. 8P-2483 [1] LEVER  
45. 5S-9704 [2] SHAFT  
  1D-4720 [2] NUT  
  5P-8247 C [2] WASHER-HARD  
46. 0S-1621 C [2] BOLT  
  1J-8965 [2] WASHER 3.81CM(1.5IN.)O.D.  
47. 3P-3935 [1] SHAFT AS  
  1B-8704 [1] KEY-WOODRUFF  
48. 7L-0811 [1] DOWEL  
49. 2B-0947 C [2] BOLT  
50. 2L-6267 C [1] LOCKNUT  
51. 6D-3787 C [4] BEARING  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP13310438
 

8P-5721: LINKAGE GP-IMPLEMENT

8P5721 BULLDOZER IMPLEMENT LINKAGE GROUP-TYPE 1
AN ATTACHMENT
c215720 HEBP1331
8P5721 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [ 1] HANDLE  
2. 8P-2480 [ 1] LEVER  
3. 0S-1571 [ 2] BOLT  
4. 1D-4717 [ 4] NUT  
5. 9P-0468 [ 1] CLAMP  
6. 8P-5048 [ 1] LEVER ASSEM.  
7. 8P-7352 [ 1] SEAL  
8. 0S-1591 [ 1] BOLT  
9. 6P-5209 [ 1] COVER  
  4B-1291 [ 4] SCREW  
10. 6P-5208 [ 1] GUIDE  
11. 2J-7295 [ 1] SPRING  
12. 6P-5205 [ 1] BRACKET ASSEM.  
    (Includes)
  9F-5647 [ 2] BEARING  
13. 4D-4065 [ 1] ROD END  
14. 1B-4205 [ 3] NUT  
15. 8P-3391 [ 1] ROD ASSEM.  
    (Includes)
16. 1B-4205 [ 1] NUT  
17. 2M-8340 [ 1] ROD END  
18. 0S-0175 [ 3] PIN  
  3B-4617 [ 3] COTTER PIN  
19. 8P-2496 [ 1] LEVER  
20. 6F-7010 [ 2] ROD END  
21. 8P-5327 [ 1] ROD ASSEM.  
    (Includes)
22. 1B-4205 [ 1] NUT  
23. 4D-4065 [ 1] ROD END  
24. 8P-5324 [ 1] SPACER  
25. 8P-5333 [ 1] BRACKET ASSEM.  
26. 0S-1587 [ 2] BOLT  
27. 3B-4508 [ 4] LOCKWASHER  
28. 1A-1460 [ 1] BOLT  
  1K-6872 [ 1] LOCKNUT  
29. 1D-4719 [ 3] NUT  
30. 2P-8145 [ 1] BELLCRANK  
31. 0L-1351 [ 1] BOLT  
  8M-4069 [ 1] WASHER  
32. 6D-3787 [ 4] BEARING  
33. 0S-1587 [ 1] BOLT  
34. 8P-5325 [ 1] ROD ASSEM.  
    (Includes)
  4D-4065 [ 1] ROD END  
  1B-4205 [ 1] NUT  
35. 0S-1590 [ 1] BOLT  
36. 3B-4506 [ 6] LOCKWASHER  
37. 1A-2029 [ 4] BOLT  
  4B-4278 [ 4] WASHER  
38. 0S-1573 [ 1] BOLT  
39. 8P-2483 [ 1] LEVER  
40. 3P-3942 [ 1] SHAFT  
  1B-8704 [ 2] KEY  
  5S-9704 [ 1] SHAFT  
  1D-4720 [ 1] NUT  
  3B-4510 [ 1] LOCKWASHER  
42. 2H-3855 [ 1] BOLT  
  1J-8965 [ 1] WASHER  
43. 3S-3158 C [ 1] PIPE  
    INDICATES CHANGE
 

#HEBP13310439
 

8P-5721: LINKAGE GP-IMPLEMENT

8P5721 BULLDOZER IMPLEMENT LINKAGE GROUP-TYPE 2
AN ATTACHMENT
c335610 HEBP1331
8P5721 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 0S-1571 [2] BOLT  
4. 1D-4717 [4] NUT  
5. 9P-0468 [1] CLAMP  
6. 8P-5048 [1] LEVER AS  
7. 8P-7352 [1] SEAL-DOMED  
8. 0S-1591 [1] BOLT  
9. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW-MACHINE  
10. 6P-5208 [1] GUIDE-CONTROL  
11. 2J-7295 [1] SPRING  
12. 6P-5205 [1] BRACKET AS  
  9F-5647 [2] BEARING  
13. 6D-5974 C [2] BEARING-ROLLER  
14. 6V-2761 C [2] BOOT-ROD END  
15. 6T-1442 C [1] ROD AS  
16. 1B-4430 [2] NUT-JAM  
17. 2Y-8851 [2] ROD END  
18. 1K-6872 C [5] LOCKNUT  
19. 8P-2496 [1] LEVER  
20. 6V-2762 C [4] SPACER  
21. 7T-0213 C [1] ROD AS  
22. 1B-4430 [2] NUT-JAM  
23. 4D-4065 [2] ROD END-BEARING  
24. 8P-5324 [1] SPACER  
25. 8P-5333 [1] BRACKET AS  
26. 0S-1587 C [6] BOLT  
27. 5P-8245 C [4] WASHER (SMALL)  
28. 2B-0947 C [1] BOLT  
29. 8M-9124 C [1] WASHER (SMALL)  
30. 9G-8854 C [1] BELLCRANK  
31. 0S-1594 C [1] BOLT  
  8M-4069 [1] WASHER (LARGE)  
32. 6D-3787 C [2] BEARING  
33. 3B-8489 C [1] FITTING-GREASE  
34. 6T-1456 C [1] ROD AS  
  1B-4430 [2] NUT-JAM  
  2Y-8851 [2] ROD END  
35. 0S-1590 [1] BOLT  
36. 5M-2894 C [5] WASHER  
37. 0S-1588 C [4] BOLT  
38. 0S-1573 [1] BOLT  
39. 8P-2483 [1] LEVER  
40. 3P-3942 [1] SHAFT  
  1B-8704 [2] KEY-WOODRUFF  
41. 5S-9704 [1] SHAFT  
  1D-4720 [1] NUT  
  5P-8247 C [1] WASHER-HARD  
42. 0S-1621 C [1] BOLT  
  1J-8965 [1] WASHER (LARGE)  
43. 3S-3158 [1] PIPE  
  5P-8166 CF [1] FILM-INSTRUCTION  
    (WARNING-MOUNTED ON
    R.H. SIDE OF PLATFORM
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D5B :

CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-HYDRAULIC
7J-8299 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
LINES GP-TILT CYLINDER
1U-0653 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0476 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0476 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
9P-0476 LINES GP-TILT CYLINDER
PLATE-REINFORCEMENT
8P-7050 PLATE-REINFORCEMENT
MOUNTING GP-CYLINDER
8J-2895 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
6J-8500 MOUNTING GP-CYLINDER
BRACKET GP-CYLINDER
5J-9210 BRACKET GP-CYLINDER
BRACKET GP-CYLINDER
5J-9210 BRACKET GP-CYLINDER
LINKAGE GP-IMPLEMENT
8P-5040 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5692 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5692 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5721 LINKAGE GP-IMPLEMENT

Truck sale:

Caterpillar D5B, Construction
22,773 
Caterpillar D5B, Construction
- Dozers
BERGERAT MONNOYEUR S.A.S.
France
CATERPILLAR D5B 1984
 
CATERPILLAR D5B 1984
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR D5B 1978
- TRACK TYPE TRACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
1982 CAT D5B
Call 
1982 CAT D5B

C&C Machinery LLC
CAT D5B
USD $25,500 
CAT D5B

Riggs Tractor Company & Dozer Service
Severy, Kansas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.