AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G717 LIFT CYLINDER GROUP-(CHANGE 5) 120.6 MM (4.8") BORE X 700 MM (27.6") STROKE-2 REQUIRED. SERIAL NO. 77Y1 TO 77Y1032 INCLUSIVE 953


HYDRAULIC SYSTEM
CYLINDER GP
PUMP GP
CYLINDER GP
PUMP GP

TRACK LOADER 953 TRACK LOADER 77Y
 953 TRACK LOADER / HIGH DRIVE / 77Y00001-01092 (MACHINE) POWERED BY 3204 ENGINE HEBP1349 953 77Y   (1981)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
CYLINDER GP-LIFT
3G-0717 CYLINDER GP-LIFT
CYLINDER GP-LIFT
4T-0263 CYLINDER GP-LIFT
CYLINDER GP
4T-2098 CYLINDER GP
CYLINDER GP
3G-1296 CYLINDER GP
 

#HEBP13490380
 

3G-0717: CYLINDER GP-LIFT

3G717 LIFT CYLINDER GROUP-(CHANGE 5) 120.6 MM (4.8") BORE X 700 MM
(27.6") STROKE-2 REQUIRED. SERIAL NO. 77Y1 TO 77Y1032 INCLUSIVE
c307022 HEBP1349
3G0717 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-0718 [1] CYLINDER ASSEM.  
  1U-0563 C [1] BEARING  
2. 5J-3620 [1] SEAL  
3. 5J-0964 [1] SEAL  
4. 8J-5964 [1] CROWN  
5. 1K-6982 [1] SEAL  
6. 3G-0720 R [1] ROD ASSEM.  
7. 8J-5912 [1] SCREW  
8. 2J-3961 [1] RING  
9. 5H-6734 [1] SEAL  
10. 8J-5966 [1] HEAD  
11. 8J-5965 [1] PISTON  
12. 5J-4987 [1] SEAL ASSEM.  
13. 4J-3342 [1] RING  
14. 3S-6162 [1] WASHER  
15. 6V-2710 [1] BOLT  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13490381
 

4T-0263: CYLINDER GP-LIFT

4T263 LIFT CYLINDER GROUP-(CHANGE V1)-120.6 MM (4.8") BORE X 700 MM
(27.6") STROKE-2 REQUIRED. SERIAL NO. 77Y1033 TO 77Y1038 INCLUSIVE
c312069 HEBP1349
4T0263 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-0262 [1] CYLINDER AS  
2. 1U-0563 [1] BEARING  
3. 5J-0964 C [1] SEAL-U-CUP  
4. 3G-3910 R [1] CROWN  
5. 1K-6982 [1] SEAL-LIP TYPE  
6. 3G-0720 [1] ROD AS  
7. 5J-3620 [1] SEAL-RING  
8. 2J-3961 [1] RING-BACK-UP  
9. 5H-6734 R [1] SEAL-O-RING  
10. 8J-5966 [1] HEAD  
11. 8J-5965 [1] PISTON  
12. 5J-4987 [1] SEAL AS  
13. 4J-3342 [1] RING-WEAR  
14. 3S-6162 [1] WASHER-HARD  
15. 8J-6164 [1] BOLT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13490382
 

4T-2098: CYLINDER GP

4T2098 LIFT CYLINDER GROUP-(CHANGE V0)-120.65 MM (4.8") BORE X 711 MM
(28") STROKE-2 REQUIRED. SERIAL NO. 77Y1039-UP
c307903 HEBP1349
4T2098 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2099 R [1] CYLINDER ASSEM.  
    (Includes)
2. 1U-0563 [1] BEARING  
3. 5J-0964 [1] SEAL  
4. 3G-3910 [1] CROWN  
5. 1K-6982 [1] SEAL  
6. 4T-2493 R [1] ROD ASSEM.  
7. 5J-3620 [1] SEAL  
8. 2J-3961 [1] RING  
9. 5H-6734 [1] SEAL  
10. 8J-5966 [1] HEAD  
11. 8J-5965 [1] PISTON  
12. 5J-4987 [1] SEAL ASSEM.  
13. 4J-3342 [1] RING  
14. 3S-6162 [1] WASHER  
15. 6V-2710 [1] BOLT  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13490383
 

3G-1296: CYLINDER GP

3G1296 RIPPER CYLINDER GROUP-(CHANGE 3)-101.6 MM (4.7") BORE X 270 MM
(10.6") STROKE. PART OF 3G5128 RIPPER MOUNTING & CYLINDER GROUP SHOWN
ON PAGE 196. AN ATTACHMENT
c312179 HEBP1349
3G1296 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER AS.  
2. 7J-5639 [1] BOLT  
  8J-7415 [1] WASHER  
3. 6J-2797 [1] RING  
4. 5J-5402 [1] SEAL AS.  
  5J-5401 [1] RING  
5. 6J-6917 [1] SEAL  
6. 5J-8200 [1] SEAL  
7. 1K-6981 [1] SEAL  
8. 3G-1294 [1] ROD AS.  
9. 7J-6461 [1] CROWN  
10. 9S-4190 [1] PLUG  
  2M-9780 [1] SEAL  
11. 1H-8128 [1] SEAL  
  2K-6830 [1] RING  
12. 7J-6462 [1] HEAD  
13. 7J-6469 [1] PISTON  
 

#HEBP13490384
 

9J-4892: CYLINDER GP-BUCKET

9J4892 BUCKET CYLINDER GROUP (2V9862 N/S) (CHANGE B0)-101.6 MM (4.7") BORE
X 257.0 MM (10.1") STROKE-2 REQUIRED. PART OF 3V6114 MULTI-PURPOSE
BUCKET ARRANGEMENT LISTED ON PAGE 191. AN ATTACHMENT
c226679 HEBP1349
9J4892 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4891 R [1] CYLINDER ASSEM.  
    (Includes)
2. 8J-5667 [1] BEARING  
3. 7K-9204 A [2] SEAL  
4. 2J-3950 [1] NUT  
5. 6J-2797 [1] RING  
6. 1H-8128 [1] SEAL  
7. 2K-6830 [1] RING  
8. 5J-8200 [1] SEAL  
9. 1K-6981 [1] SEAL  
10. 8J-5668 R [1] ROD ASSEM.  
    (Includes)
11. 7J-9688 [1] BEARING  
12. 0S-1625 [4] BOLT  
  5P-8247 [4] WASHER  
13. 7J-6475 [1] HEAD  
14. 5J-5402 [1] SEAL ASSEM.  
15. 6J-2798 [1] PISTON  
16. 6J-6917 [1] SEAL  
17. 7K-9202 A [2] SEAL  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP13490385
 

9V-8168: CYLINDER & SEAL GP

9V8168 SEAL AND CYLINDER GROUP
4T9387-PAGE 185.02. PART OF 8V7365 BUCKET
AN ATTACHMENT
c322055 HEBP1349
9V8168 CYLINDER & SEAL GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9387 Y [1] CYLINDER GP  
2. 7K-9204 [2] SEAL-LIP TYPE 69.95MM(2.75IN)OD  
  7K-9202 [2] SEAL-LIP TYPE 57.25MM(2.25IN)OD  
  Y   SEPARATE ILLUSTRATION
 

#HEBP13490386
 

4T-9387: CYLINDER GP

4T9387 CYLINDER GROUP
PART OF 9V8168 SEAL AND CYLINDER
AN ATTACHMENT
c322056 HEBP1349
4T9387 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-9386 [1] CYLINDER AS  
  4T-9862 [1] CAP AS  
2. 8J-5667 [1] BEARING-SLEEVE  
3. 7V-4240 [4] BLOCK  
4. 5J-5402 [1] SEAL AS  
  5J-5400 [1] SEAL  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 4T-9384 [1] ROD AS  
9. 7J-9688 [1] BEARING-SLEEVE  
10. 7J-6461 [1] CROWN  
11. 1H-8128 [1] SEAL-O-RING  
  2K-6830 [1] RING-BACK-UP  
12. 7J-6462 [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 6J-2797 [1] RING-WEAR  
15. 7J-5639 [1] BOLT-SELF LOCKING  
  5P-8250 [1] WASHER  
 

#HEBP13490387
 

7P-6166: PUMP GP-VANE

7P6166 VANE PUMP GROUP
SERIAL NO. 77Y1 TO 77Y1062 INCLUSIVE
3G2805 PUMP PARTS ARE SHOWN ON PAGE 187
c231526 HEBP1349
7P6166 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4781 [1] GEAR (38 teeth)  
2. 1D-5121 [1] NUT  
3. 4J-2861 [1] LOCK  
4. 7J-8114 [1] GASKET  
5. 3G-2805 Y [1] PUMP GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#HEBP13490388
 

2V-9910: MOUNTING GP-CYLINDER

2V9910 CYLINDER MOUNTING GROUP
PART OF 3V6114 MULTI-PURPOSE BUCKET ARRANGEMENT LISTED ON PAGE 191
AN ATTACHMENT
c226677 HEBP1349
2V9910 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2006 [2] BOLT  
  1D-4719 [2] NUT  
2. 3K-6607 [2] PIN  
3. 2K-0703 [2] WASHER BAR  
4. 3B-8489 [4] FITTING  
5. 0S-1621 [4] BOLT  
6. 3B-4508 [6] LOCKWASHER  
7. 6K-3447 [2] PIN  
 

#HEBP13490389
 

8G-7153: PUMP GP-VANE

8G7153 VANE PUMP GROUP-SINGLE
SERIAL NO. 77Y1063-UP. 3G2805 PUMP PARTS ARE SHOWN ON PAGE 187
c307885 HEBP1349
8G7153 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9758 [1] GEAR (38 teeth)  
2. 1D-5121 [1] NUT  
3. 4J-2861 [1] LOCK  
4. 2W-2506 [1] SPACER  
5. 3G-2805 Y [1] PUMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 953 :

CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
LINES GP-RIPPER
1U-4454 LINES GP-RIPPER
LINES GP-BUCKET
9V-8415 LINES GP-BUCKET
LINES GP-BUCKET
8V-7369 LINES GP-BUCKET
LINES GP-HYDRAULIC
3V-6224 LINES GP-HYDRAULIC
LINES GP-PUMP
7P-6165 LINES GP-PUMP
LINES GP-ATTACHMENT
7P-1094 LINES GP-ATTACHMENT
7P-2655 LINES GP-FRONT
CYLINDER GP-LIFT
4T-0263 CYLINDER GP-LIFT
CYLINDER GP
4T-2098 CYLINDER GP
CYLINDER GP
3G-1296 CYLINDER GP
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
CYLINDER & SEAL GP
9V-8168 CYLINDER & SEAL GP
CYLINDER GP
4T-9387 CYLINDER GP
PUMP GP-VANE
7P-6166 PUMP GP-VANE
MOUNTING GP-CYLINDER
2V-9910 MOUNTING GP-CYLINDER

Truck sale:

Caterpillar 953K, track loaders, Construction
190,000 
Caterpillar 953K, track loaders, Construction
- track loaders
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 953K, track loaders, Construction
285,000 
Caterpillar 953K, track loaders, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 953K, track loaders, Construction
265,000 
Caterpillar 953K, track loaders, Construction
- track loaders
FABICK CAT
 
344,000 
Caterpillar 953, track loaders, Construction
- track loaders
WHEELER MACHINERY CO.
Caterpillar 953K, track loaders, Construction
268,000 
Caterpillar 953K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.