AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1U4802 TILT CYLINDER GROUP (CHANGE V0)-121 MM (4.75 IN.) BORE X 493 MM (19.4 IN.) STROKE 943 TRACK LOADER


HYDRAULIC SYSTEM
CYLINDER GP
PUMP GP
KICKOUT & POSITIONER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
CONTROL GP

TRACK LOADER 943 TRACK LOADER 03Y
 943 TRACK LOADER / HIGH DRIVE / 03Y01386-UP (MACHINE) POWERED BY 3204 ENGINE HEBP1455 943 03Y   (1981)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
CYLINDER & SEAL GP
9V-8168 CYLINDER & SEAL GP
CYLINDER GP
4T-9387 CYLINDER GP
CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
CYLINDER GP
3G-1296 CYLINDER GP
MOUNTING GP-CYLINDER
8V-7370 MOUNTING GP-CYLINDER
CYLINDER & MOUNTING GP
4T-0660 CYLINDER & MOUNTING GP
 

#HEBP14550490
 

1U-4802: CYLINDER GP-TILT

1U4802 TILT CYLINDER GROUP (CHANGE V0)-121 MM (4.75 IN.) BORE X 493 MM
(19.4 IN.) STROKE
c301146 HEBP1455
1U4802 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4801 R [1] CYLINDER AS  
  9S-7725 [1] PLUG-SEALING  
  3D-2824 [1] SEAL-O-RING  
  0T-0690 [4] BOLT  
2. 3G-8605 [1] CAP AS  
  3G-8606 [1] BEARING  
3. 3G-4649 [1] PISTON  
4. 3J-9545 [1] NUT-SELF LOCKING  
5. 4J-3342 [1] RING-WEAR  
6. 5J-4987 [1] SEAL AS  
7. 1D-4627 [2] BOLT  
8. 5P-8249 [2] WASHER  
9. 5J-0964 [1] SEAL-U-CUP  
10. 1K-6982 [1] SEAL-LIP TYPE  
11. 3G-4643 R [1] ROD AS  
12. 1U-4049 [1] WASHER  
13. 5H-6734 [1] SEAL-O-RING  
  2J-3961 [1] RING-BACK-UP  
14. 5J-3620 [1] SEAL-RING  
15. 3G-4650 [1] HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP14550491
 

3G-1296: CYLINDER GP

3G1296 RIPPER CYLINDER GROUP (CHANGE 0)-101.6 MM (4.00 IN.) BORE X 270 MM
(10.6 IN.) STROKE
PART OF 4T0660 RIPPER MOUNTING & CYLINDER GROUP SHOWN ON PAGE 239
AN ATTACHMENT
c511808 HEBP1455
3G1296 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER AS  
2. 7J-5639 [1] BOLT-SELF LOCKING  
  8J-7415 [1] WASHER-HARD  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 3G-1294 [1] ROD AS  
9. 7J-6461 [1] CROWN  
10. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
11. 1H-8128 [1] SEAL-O-RING  
12. 7J-6462 [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 2K-6830 [1] RING-BACK-UP  
 

#HEBP14550492
 

3G-1752: PUMP GP-VANE

3G1752 VANE PUMP GROUP
PART OF 8G7151 VANE PUMP GROUP SHOWN ON PAGE 226
1U3519 CARTRIDGE PARTS ARE SHOWN ON PAGE 227
c303748 HEBP1455
3G1752 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-3504 [1] COVER  
2. 1U-3519 RY [1] CARTRIDGE GROUP  
    (Separate Illustration)
3. 4M-7652 [1] RING  
4. 1U-3518 [1] BODY  
5. 5P-0903 [1] SEAL  
6. 1U-3842 [1] SHAFT  
7. 4M-7648 [1] WASHER  
8. 3G-7242 [1] PLUG  
9. 4J-0985 [1] BEARING  
10. 1L-8497 [1] RING  
11. 1D-4569 [4] BOLT  
12. 3G-9193 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#HEBP14550493
 

8G-7151: PUMP GP-VANE

8G7151 VANE PUMP GROUP-SINGLE
3G1752 PUMP PARTS ARE SHOWN ON PAGE 226
c307939 HEBP1455
8G7151 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9758 [1] GEAR (38 TEETH)  
2. 1D-5121 [1] NUT  
3. 4J-2861 [1] LOCK  
4. 2W-2506 [1] SPACER  
5. 3G-1752 Y [1] PUMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

#HEBP14550494
 

1U-3519: CARTRIDGE GP

1U3519 CARTRIDGE GROUP*R
PART OF 3G1752 VANE PUMP GROUP SHOWN ON PAGE 226
c402151 HEBP1455
1U3519 CARTRIDGE GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3078 [4] SEAL-O-RING  
2. 3G-2192 [4] RETAINER-SEAL  
3. 9T-5041 [2] DOWEL  
4. 9T-5047 [1] PLATE-INLET  
5. 064-7311 [1] KIT-VANE  
6. 9T-5065 [1] RING  
7. 6V-1197 [1] SEAL-O-RING  
8. 8J-4351 [1] SEAL-O-RING  
9. 9T-5086 [1] RING  
10. 9T-5090 [1] PLATE-OUTLET  
11. 3G-2193 [1] RING-SEAL  
12. 9T-5098 [2] FLEXPLATE  
13. 064-7310 [1] ROTOR-PUMP  
14. 9T-5110 [2] SCREW  
 

#HEBP14550495
 

7P-6608: KICKOUT & POSITIONER GP

7P6608 KICKOUT & POSITIONER GP-PART 1 OF 2
c453257 HEBP1455
7P6608 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7P-8695 [1] PLATE AS  
2. 0S-0509 [2] BOLT  
3. 5M-2894 C [3] WASHER  
4. 7P-8697 [1] LEVER AS  
  4B-4283 [1] WASHER  
5. 5P-5015 [4] BEARING-ROLLER  
6. 0S-1591 [2] BOLT  
7. 1D-4717 C [4] NUT  
8. 7P-4493 [1] LEVER  
9. 1B-8706 C [1] KEY-WOODRUFF  
10. 1B-0676 [3] PIN  
11. 4M-2348 C [3] COTTER  
12. 1F-5403 [1] END-ADJUSTABLE ROD  
13. 1B-4203 [5] NUT-FULL  
14. 7P-8701 [1] ROD  
15. 4D-4064 [1] ROD END  
16. 0T-0102 C [1] BOLT  
17. 4V-8198 [1] SPACER  
18. 8G-4257 [1] LEVER  
19. 8G-3525 [1] LEVER  
20. 8G-1029 [1] ROLLER  
  3D-8823 [1] BEARING-SLEEVE  
  8M-5346 [1] SUPPORT-BAFFLE  
21. 1K-6872 [1] LOCKNUT  
  0S-1587 [1] BOLT  
22. 7P-3439 [1] LEVER  
23. 7P-8633 C [1] SHAFT  
24. 6D-5974 [2] BEARING-ROLLER  
25. 8G-0576 [1] TUBE AS  
26. 010-2901 [1] SETSCREW-SQUARE HEAD  
27. 1L-3047 [2] WASHER  
28. 0S-1590 [1] BOLT  
29. 3W-3320 C [1] CLIP  
30. 0L-0478 [1] BOLT  
  6B-0933 [1] SPACER  
31. 1A-9252 [2] END-ADJUSTABLE ROD  
32. 7P-8847 [1] ROD  
33. 7P-3420 [1] SHAFT  
34. 2H-3855 C [2] BOLT  
  5P-8245 [2] WASHER  
35. 0L-1143 [1] BOLT  
  0L-1319 [1] WASHER  
36. 5P-1075 [1] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP14550496
 

7P-6608: KICKOUT & POSITIONER GP

7P6608 KICKOUT & POSITIONER GP-PART 2 0F 2
c453258 HEBP1455
7P6608 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7P-3415 [1] SHAFT  
2. 1F-4449 [1] SPRING  
3. 7P-8677 [1] COVER  
4. 0L-1351 [5] BOLT  
5. 5P-1075 [8] WASHER-HARD  
6. 7B-0462 [1] WASHER 6.35MM(.25IN.)THK  
7. 7P-8679 [1] BAR AS  
8. 2B-0860 [1] NUT-THREAD-LH  
9. 7P-8683 [1] ROD AS  
  5P-0541 [1] NUT-JAM  
10. 1D-5119 [1] NUT  
11. 7P-8685 [1] LEVER AS  
  1K-4675 [1] BUSHING-OILLESS  
12. 7F-5227 [1] BOLT  
13. 6K-8714 [4] WASHER  
14. 7P-8687 [1] SHAFT  
15. 6F-3890 [1] SPACER-CLUTCH LEVER  
16. 6D-3787 [1] BEARING  
17. 7P-1810 [1] BEARING AS  
18. 7P-8676 [1] SUPPORT AS  
19. 7P-8672 [1] PLATE  
20. 0S-1619 [1] BOLT  
  2K-4973 [1] LOCKNUT  
  8M-7145 [1] WASHER  
21. 0S-1594 [2] BOLT  
22. 7P-8688 [1] PLATE  
23. 7P-8669 [1] BRACKET AS  
24. 9F-2978 [5] NUT-WELD  
25. 7P-8678 [1] PLATE  
26. 3J-5397 [1] ROLLER-CAMSHAFT  
27. 4D-6432 [1] LOCKNUT  
  3V-3307 [1] WASHER-HARD  
28. 7P-3414 [1] LEVER  
29. 0S-1571 [1] BOLT  
  0L-1319 [1] WASHER  
 

#HEBP14550497
 

3G-4427: BIT & CUTTING EDGE GP

3G4427 BIT AND CUTTING EDGE GROUP
NOTE: 1U1896 LONG WEARING BIT IS AVAILABLE
AN ATTACHMENT
c226675 HEBP1455
3G4427 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1J-5607 [10] BOLT  
  2J-3507 [10] NUT  
2. 1U-0294 [2] EDGE  
3. 3G-6993 [2] BIT  
 

#HEBP14550498
 

8G-5318: CONTROL GP-BUCKET

8G5318 CONTROL GP-BUCKET
S/N 3Y1386-1593
c453392 HEBP1455
8G5318 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1589 [3] BOLT  
2. 8G-0878 [2] PIN AS  
3. 7K-6627 [6] FITTING-HYDRAULIC  
4. 8G-0877 [1] PIN AS  
5. 7K-9209 [4] SEAL-LIP TYPE  
6. 8G-5319 [1] ARM & BEARING AS  
7. 1V-1292 [2] BEARING-SLEEVE  
8. 1V-3342 [2] BEARING-SLEEVE  
9. 1V-1290 [2] BEARING-SLEEVE  
10. 2K-3656 [1] BAR  
11. 0L-1178 [3] BOLT  
12. 7P-1579 [3] SPACER  
13. 7P-1566 [1] LEVER & BEARING AS  
  9K-9851 [1] BEARING-SLEEVE  
14. 7P-9113 [1] PIN AS  
  7K-9216 [2] SEAL-LIP TYPE  
15. 3B-8489 [2] FITTING-GREASE  
16. 1D-4572 [1] BOLT  
17. 1K-6872 [3] LOCKNUT  
18. 7P-9115 [1] LINK & BEARING AS  
  7P-1576 [2] BEARING-SLEEVE  
19. 1V-1293 [1] PIN  
20. 7K-9204 [4] SEAL-LIP TYPE  
21. 7K-9208 [4] SEAL-LIP TYPE  
22. 7K-9212 C [2] SEAL-LIP TYPE  
23. 1V-1294 [2] PIN  
  7P-6711 [8] WASHER 1.6MM(.06IN.)THK  
  7P-6712 [8] WASHER 3MM(.11IN.)THK  
24. 7K-9203 [12] SEAL-LIP TYPE  
25. 7P-6820 [1] SPACER  
26. 8G-0876 [1] PIN AS  
27. 7P-1577 [2] PIN AS  
28. 2S-7593 [4] WASHER-HARD 5MM(.196IN.)THK  
  8S-1069 [4] WASHER 12.7MM(.500IN.)THK  
29. 8G-0875 [2] PIN AS  
30. 8G-0874 [1] PIN AS  
31. 0S-1566 [1] BOLT  
32. 7P-9117 [2] SPACER  
33. 2B-2006 [2] BOLT  
34. 2D-4867 [2] FITTING-HYDRAULIC  
35. 3B-8491 [3] FITTING-STRAIGHT  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP14550499
 

8G-5318: CONTROL GP-BUCKET

8G5318 CONTROL GP-BUCKET
S/N 3Y1594-UP
c505543 HEBP1455
8G5318 CONTROL GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0345 C [9] BOLT  
2. 8G-0878 [2] PIN AS  
3. 7K-6627 [6] FITTING-HYDRAULIC  
4. 8G-0877 [1] PIN AS  
5. 7K-9209 [4] SEAL-LIP TYPE  
6. 3W-4361 C [1] ARM & BEARING AS  
7. 1V-1292 [2] BEARING-SLEEVE  
8. 1V-3342 [2] BEARING-SLEEVE  
9. 3W-4362 [2] BEARING  
10. 2D-4867 [2] FITTING-HYDRAULIC  
11. 7X-0366 C [4] BOLT  
12. 7X-0515 C [6] WASHER (5MM THK)  
13. 8Y-3594 [1] BEARING AS-LEVER  
  9K-9851 [1] BEARING-SLEEVE  
14. 7P-9113 [1] PIN AS  
15. 3B-8489 [2] FITTING-GREASE  
16. 7X-0583 C [3] WASHER-HARD  
17. 3B-8491 [3] FITTING-STRAIGHT  
18. 7P-9115 [1] LINK & BEARING AS  
  7P-1576 [2] BEARING-SLEEVE  
19. 8G-5375 C [1] PIN AS  
20. 7K-9204 [4] SEAL-LIP TYPE  
21. 7K-9208 [4] SEAL-LIP TYPE  
22. 7K-9212 [2] SEAL-LIP TYPE  
23. 3W-4363 C [2] PIN AS  
  7P-6711 [8] WASHER 1.6MM(.06IN.)THK  
  7P-6712 [8] WASHER 3MM(.11IN.)THK  
24. 7K-9203 [12] SEAL-LIP TYPE  
25. 7X-0582 C [4] WASHER-HARD  
26. 8G-0876 [1] PIN AS  
27. 7P-1577 [2] PIN AS  
28. 8S-1069 C [9] WASHER 12.7MM(.500IN.)THK  
29. 8G-0875 [2] PIN AS  
30. 8G-0874 [1] PIN AS  
31. 9K-9731 C [4] SPACER  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Relief Valves For Attachment Cylinder And Head End Of Tilt Cylinder<BR> (9J458)
943 & 953 TRACK-TYPE LOADERS
Relief Valve For Rod End Of Tilt Cylinder<BR> (9J459)
943 & 953 TRACK-TYPE LOADERS
Relief Valve For Head End Of Lift Cylinder<BR> (3G9804)
943 & 953 TRACK-TYPE LOADERS
943 Lift Cylinders<BR> (9J532)
943 & 953 TRACK-TYPE LOADERS
943 Tilt Cylinder<BR> (3G4653 &amp; 1U4802)
943 & 953 TRACK-TYPE LOADERS
953 Lift Cylinders<BR> (3G717)
943 & 953 TRACK-TYPE LOADERS
953 Tilt Cylinder<BR> (1U418)
943 & 953 TRACK-TYPE LOADERS
Multi-Purpose Bucket Cylinders<BR> (9J4892)
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinders<BR> (3G1296)
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinder Mounting Group
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Lift Cylinders
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Tilt Cylinder
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Service Magazine
6V86 And 6V4035 Sleeve Assemblies Are Available To Remove Pins From Hydraulic Cylinders And Linkage{0621}
1981/01/19
Locknuts And Lower Torque Prevent Clamp Damage To Lift Cylinder Lines{5057}
1981/06/29
Orifice/Choke Added To Tilt Cylinder Lines For Better Bucket Control{5057}
1982/03/15
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
New Relief Valve And Baffle Used In Lift Cylinder Hydraulic Circuit{5117,5102}
1985/08/12
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 943 :

CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP
4T-9387 CYLINDER GP
CYLINDER & SEAL GP
9V-8168 CYLINDER & SEAL GP
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
LINES GP-BUCKET
9V-8414 LINES GP-BUCKET
LINES GP-BUCKET
9V-8414 LINES GP-BUCKET
LINES GP-BUCKET
8V-7362 LINES GP-BUCKET
LINES GP-RIPPER
1U-4504 LINES GP-RIPPER
CYLINDER GP
3G-1296 CYLINDER GP
PUMP GP-VANE
3G-1752 PUMP GP-VANE
PUMP GP-VANE
8G-7151 PUMP GP-VANE
CARTRIDGE GP
1U-3519 CARTRIDGE GP
KICKOUT & POSITIONER GP
7P-6608 KICKOUT & POSITIONER GP
7P-6608 KICKOUT & POSITIONER GP
BIT & CUTTING EDGE GP
3G-4427 BIT & CUTTING EDGE GP
CONTROL GP-BUCKET
8G-5318 CONTROL GP-BUCKET

Truck sale:

Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 943, Construction
17,730 
Caterpillar 943, Construction
- track loaders
ZEPPELIN BAUMASCHINEN
Germany
 
17.823 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders

 
18,302 
Caterpillar 943, Construction
- track loaders

Caterpillar TH943D, Construction
1,991 
Caterpillar TH943D, Construction
- forks
FINNING CANADA – USED ATTACHMENTS
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.