BASIC ENGINE
CRANKSHAFT GPPISTON & ROD GP
CAMSHAFT GP
CYLINDER HEAD GP
VALVE MECHANISM GP
BASIC ENGINE
CRANKSHAFT GP#HEBP14660010
6N-8079: CRANKSHAFT GP
6N8079 CRANKSHAFT GROUP
For Field Replacement of 4N7697 order 4N7693 shown on Page 25
For Field Replacement of 4N7697 order 4N7693 shown on Page 25
#HEBP14660011
4N-7693: CRANKSHAFT AS
4N7693 CRANKSHAFT GROUP--Field Installation
#HEBP14660012
2P-6224: SEAL GP-CRANKSHAFT
2P6224 CRANKSHAFT SEAL GROUP
#HEBP14660013
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
Parts for your 3306 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|
#HEBP14660014
2W-1177: PISTON & ROD GP
2W1177 CONNECTING ROD AND PISTON GROUP--6 Required
Parts for your 3306 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-9805 | [ 1] | PIN | |
| 2. | 1S-9543 | [ 2] | RETAINER | |
| 3. | 8N-1721 R | [ 1] | ROD ASSEM. | |
| (Includes) | ||||
| 8N-1849 | [ 1] | BEARING | ||
| 4. | 1P-9956 | [ 2] | BOLT | |
| 5S-6348 | [ 2] | NUT | ||
| 5. | 8N-8219 | [ 1] | BEARING (Standard) | |
| 2S-0502 | [ 1] | BEARING .254mm(.01 in.)undersize | ||
| 2S-0503 | [ 1] | BEARING .508mm(.02 in.)undersize | ||
| 7M-7826 | [ 1] | BEARING .762mm(.03 in.)undersize | ||
| 6. | 2W-1711 | [ 1] | PISTON GROUP | |
| (Includes) | ||||
| 7. | 9L-6934 | [ 1] | RING (Oil) | |
| 8. | 2W-1708 | [ 1] | RING (Intermediate) | |
| 9. | 2W-1707 | [ 1] | RING (Top) | |
| 10. | 8N-3102 R | [ 1] | BODY ASSEM. | |
| 2W-1709 | [ 1] | RING KIT | ||
| (Consists of complete set of rings for one piston) | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
#HEBP14660015
1N-4406: CAMSHAFT GP-SINGLE
1N4406 CAMSHAFT GROUP--Single
#HEBP14660016
7N-9536: FASTENER GP-CYLINDER HEAD
7N9536 CYLINDER HEAD FASTENER GROUP
#HEBP14660017
8N-0246: CYLINDER HEAD GP
8N246 CYLINDER HEAD GROUP
Parts for your 3306 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7S-7144 | [ 12] | SPRING | |
| 2. | 1W-5300 C | [ 12] | ROTOCOIL ASSEM. | |
| (Each includes) | ||||
| 6N-7174 | [ 1] | SHIELD | ||
| 3. | 2A-4429 | [ 24] | LOCK | |
| 4. | 8N-6796 R | [ 1] | HEAD ASSEM. | |
| (Includes) | ||||
| 5. | 0S-1594 | [ 4] | BOLT | |
| 6. | 5M-2894 | [ 4] | WASHER | |
| 7. | 1P-6367 | [ 1] | COVER | |
| 8. | 5S-6735 | [ 1] | GASKET | |
| 9. | 3B-0623 | [ 6] | PLUG | |
| 10. | 3S-8313 | [ 7] | PLUG | |
| 11. | 1S-3062 | [ 18] | DIRECTOR | |
| 12. | 2B-0858 | [ 3] | PLUG | |
| 13. | 7N-4448 | [ 6] | INSERT (intake) | |
| 14. | 8N-0435 | [ 6] | INSERT (exhaust) | |
| 15. | 2P-1262 | [ 12] | GUIDE | |
| 16. | 3P-1896 | [ 12] | PLUG | |
| 17. | 7H-3171 | [ 1] | PLUG | |
| 18. | 3S-5496 | [ 1] | SEAL | |
| 19. | 7N-7999 | [ 1] | GASKET | |
| 20. | 7N-0572 | [ 6] | VALVE (intake) | |
| 21. | 6N-9916 | [ 6] | VALVE (exhaust) | |
| 22. | 7N-8025 | [ 18] | SEAL | |
| 23. | 7N-8018 | [ 6] | SEAL | |
| INDICATES CHANGE | ||||
| R | REMFG PART MAY BE AVAILABLE | |||
#HEBP14660018
7N-8026: VALVE MECHANISM GP
7N8026 VALVE MECHANISM GROUP
Parts for your 3306 TRUCK ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-3252 C | [1] | SHAFT AS-ROCKER | |
| 0L-1026 | [2] | PLUG-CUP | ||
| 2. | 7N-8015 | [1] | BRACKET-ROCKER ARM SHAFT | |
| 5M-4606 | [1] | DOWEL | ||
| 3. | 4B-4910 | [5] | SPRING | |
| 4. | 9H-1110 | [12] | WASHER | |
| 5. | 5S-5879 | [4] | BRACKET-SHAFT | |
| 6. | 8N-3324 | [6] | ROCKER ARM AS-VALVE (EXHAUST) | |
| 7. | 8N-3326 | [6] | ROCKER ARM AS-VALVE (INLET) | |
| 8. | 8S-1499 | [1] | BRACKET AS-SHAFT | |
| 3F-6795 | [1] | DOWEL | ||
| 9. | 9M-9886 B | [2] | WASHER | |
| 9H-1112 | [2] | SPRING | ||
| 9H-1113 | [2] | RING-RETAINER | ||
| 10. | 1B-4203 | [12] | NUT-FULL | |
| 11. | 5S-5917 | [12] | SCREW-ROCKER ADJUSTING | |
| 12. | 5S-5918 | [12] | ROD-VALVE PUSH | |
| 13. | 7S-3161 | [12] | LIFTER-VALVE | |
| 14. | 5P-5598 | [1] | SEAL-O-RING | |
| 15. | 1B-7709 C | [1] | BOLT | |
| 2S-0736 C | [1] | WASHER-HARD | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#HEBP14660019
8N-4745: COVER GP-VALVE MECHANISM
8N4745 VALVE MECHANISM COVER GROUP
Information:
BASIC ENGINE
CRANKSHAFT GP
Truck Engine News
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
1991/05/01
Engine News
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
2008/09/15
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Disassembly and Assembly
Service Magazine
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
1982/10/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
1979/07/02
Caterpillar Parts SIS Catalog 3306 :
Truck sale:
9,775
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
35,500
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.
8,185
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
41,500
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
35,000
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC


