AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W2925 GOVERNOR AND FUEL INJECTION PUMP GROUP Part of 2W5768 Pump Group & Governor & Fuel Injection Pump Group shown on Pages 63 & 65 8N2525 Pump & 2W2410 Governor parts are shown on Pages 67, 72 & 73 3306


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP
TORQUE CONTROL GP

TRUCK ENGINE 3306 TRUCK ENGINE 63Z
 3306 TRUCK ENGINE (FODEN) 63Z00897-UP HEBP1466 3306 63Z   (1981)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
2W-5768 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
2W-2925 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
8N-2525 GOV & FUEL INJ PUMP GP
GOVERNOR GP
2W-2410 GOVERNOR GP
GOVERNOR GP
2W-2410 GOVERNOR GP
GOVERNOR GP
2W-4107 GOVERNOR GP
GOVERNOR GP
2W-4107 GOVERNOR GP
LEVER GP-GOVERNOR CONTROL
9N-1046 LEVER GP-GOVERNOR CONTROL
 

#HEBP14660070
 

2W-2925: GOV & FUEL INJ PUMP GP

2W2925 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 2W5768 Pump Group & Governor & Fuel Injection Pump Group shown on Pages 63 & 65
8N2525 Pump & 2W2410 Governor parts are shown on Pages 67, 72 & 73
c305104 HEBP1466
2W2925 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2410 Y [1] GOVERNOR GP  
2. 7N-8768 [1] GASKET  
3. 8B-2377 [4] BOLT  
4. 8N-5784 [1] DEFLECTOR-PULSE  
5. 0S-1614 [3] BOLT  
6. 8N-2525 Y [1] GOV & FUEL INJ PUMP GP  
7. 7N-9907 [1] COVER  
8. 7N-9554 [1] GASKET  
9. 4F-7957 [6] BOLT  
10. 1B-2713 [2] BOLT  
11. 4B-4276 [2] WASHER  
12. 2S-7383 [1] BOLT  
13. 6B-4198 [2] BOLT  
14. 0S-1616 [1] BOLT  
15. 8F-8178 [2] BOLT  
16. 4N-1761 [4] BOLT  
17. 9S-4191 [1] PLUG-O-RING  
18. 3J-1907 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#HEBP14660071
 

8N-2525: GOV & FUEL INJ PUMP GP

8N2525 FUEL INJECTION PUMP GROUP
Part of 2W2925 Fuel Injection Pump Group shown on Page 66
8N2513 Camshaft, 1W6539 Fuel Injection Pump & 1W3487 Fuel Pump Housing parts are shown on Pages 69,
c305142 HEBP1466
8N2525 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING AS-FUEL PUMP  
4. 1W-6539 CY [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING  
6. 3D-2992 [6] SEAL  
7. 7N-1053 [6] SPACER-FUEL PUMP  
8. 8N-2513 Y [1] CAMSHAFT AS  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT  
13. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#HEBP14660072
 

8N-2513: CAMSHAFT AS

8N2513 CAMSHAFT ASSEMBLY
Part of 8N2525 Fuel Injection Pump Group shown on Page 67
c233361 HEBP1466
8N2513 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2510 [ 1] SHAFT  
2. 7N-7264 [ 4] WEIGHT  
3. 5P-9087 [ 4] BOLT  
4. 1S-5440 [ 4] DOWEL  
5. 4N-9019 [ 1] DOWEL  
6. 8N-2511 [ 1] CARRIER  
7. 1W-2555 C [ 1] CAMSHAFT  
8. 7N-7166 [ 2] RACE  
9. 7L-3326 [ 1] BEARING  
10. 7N-7265 [ 1] SHIELD  
    INDICATES CHANGE
 

#HEBP14660073
 

1W-6539: PUMP GP-FUEL INJECTION

1W6539 FUEL INJECTION PUMP GROUP
Part of 8N2525 Fuel Injection Pump Group shown on Page 67
c182072 HEBP1466
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
 

#HEBP14660074
 

1W-3487: HOUSING AS-FUEL PUMP

1W3487 FUEL PUMP HOUSING ASSEMBLY
Part of 8N2525 Fuel Injection Pump Group shown on Page 67
c233572 HEBP1466
1W3487 HOUSING AS-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2518 [ 1] BEARING  
2. 1S-1953 [ 1] BEARING  
3. 7N-7969 [ 6] DOWEL  
4. 1W-3285 [ 1] BEARING  
5. 8N-3731 [ 6] PIN  
  3H-0442 [ 6] SEAL  
6. 7N-7970 [ 1] BEARING  
 

#HEBP14660075
 

2W-2410: GOVERNOR GP

2W2410 GOVERNOR GROUP--Part 1
Part of 2W2925 Governor & Fuel Injection Pump Group shown on Page 66
c305133 HEBP1466
2W2410 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT  
2. 6L-5897 [2] BOLT  
3. 2W-6104 C [1] BLOCK AS-STOP  
  2W-6103 C [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 8N-2488 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 4B-2049 [1] NUT  
8. 5H-6552 [1] SETSCREW-SOCKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP14660076
 

2W-2410: GOVERNOR GP

2W2410 GOVERNOR GROUP--Part 2
Part of 2W2925 Governor & Fuel Injection Pump Group shown on Page 66
2W4107 Governor parts are shown on Pages 74 & 75
c303460 HEBP1466
2W2410 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4107 Y [ 1] GOVERNOR GROUP  
2. 1N-3800 [ 1] SLEEVE  
3. 6N-3504 [ 1] SEAT  
4. 2W-2216 [ 1] SPRING  
5. 2M-7819 [ 2] RING  
6. 1N-3802 [ 1] SEAT  
7. 8N-2507 [ 1] PISTON ASSEM.  
  8N-2505 [ 1] VALVE  
  7N-7271 [ 1] LEVER  
  3G-3835 [ 1] PIN  
8. 7N-7273 [ 1] PISTON  
9. 8N-3089 [ 1] SLEEVE  
10. 5P-9757 [ 1] SEAL  
11. 3I-0216 [ 3] BOLT  
12. 4N-2953 [ 1] RING  
13. 4N-2927 [ 2] RACE  
14. 7M-7219 [ 1] BEARING  
15. 8N-2504 [ 1] RISER  
16. 7N-7267 [ 1] SPRING  
17. 8N-2495 [ 1] HOUSING ASSEM.  
  8S-6814 [ 4] DOWEL 12.7mm(.5 in.)long  
  4F-6024 [ 2] DOWEL 8mm(.315 in.)long  
18. 8N-2503 [ 1] DASHPOT ASSEM.  
  4N-6407 [ 1] SPOOL  
  4N-6406 [ 1] RING  
19. 4N-6404 [ 1] RING  
20. 8N-2496 [ 1] GASKET  
21. 2N-0828 [ 2] WASHER  
22. 2P-9556 [ 1] WASHER  
    SEPARATE ILLUSTRATION
 

#HEBP14660077
 

2W-4107: GOVERNOR GP

2W4107 GOVERNOR GROUP--Part 1
Part of 2W2410 Governor Group shown on Page 73
c303871 HEBP1466
2W4107 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 [ 1] PLUG  
2. 8N-3259 [ 1] COVER  
  8N-3263 [ 1] GASKET  
3. 7N-2594 [ 1] SCREW  
  7N-8775 [ 1] NUT  
4. 0S-1616 [ 2] BOLT  
5. 3J-7354 [ 1] SEAL  
6. 4N-5485 [ 1] BODY  
  5F-9144 [ 1] SEAL  
7. 4N-5484 [ 1] VALVE  
  6H-9691 [ 1] SEAL  
8. 4F-7957 [ 6] BOLT  
9. 7N-8780 [ 1] COVER ASSEM.  
    (Includes)
10. 5P-3272 [ 1] SEAL  
11. 7N-8779 [ 1] GASKET  
12. 3P-0009 [ 1] INSULATOR  
13. 1P-2497 [ 2] BOLT  
14. 8N-3258 [ 1] COVER  
  8N-3264 [ 1] GASKET  
 

#HEBP14660078
 

2W-4107: GOVERNOR GP

2W4107 GOVERNOR GROUP--Part 2
Part of 2W2410 Governor Group shown on Page 73
c303982 HEBP1466
2W4107 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8785 [ 1] SHAFT  
2. 8N-2496 [ 1] GASKET  
3. 7N-7270 [ 2] SLEEVE  
4. 7N-8821 [ 3] RING  
5. 3K-5733 [ 1] SPRING  
6. 8N-2501 [ 1] HOUSING ASSEM.  
  1P-2298 [ 1] VALVE ASSEM.  
7. 8N-2499 [ 1] GUIDE  
8. 3D-8317 [ 1] RING  
9. 4N-0260 [ 1] SEAL  
10. 2F-2290 [ 1] PLUG  
11. 1P-4001 [ 1] FITTING  
12. 4N-0432 [ 1] BEARING  
13. 7N-2594 [ 1] SETSCREW  
  5B-3180 [ 1] NUT  
  9M-1974 [ 1] WASHER  
  5N-4185 [ 1] WASHER (sealing)  
14. 7N-2171 [ 4] RING  
15. 7N-2172 [ 2] PIN  
16. 8N-3087 [ 1] STOP  
17. 6N-1069 [ 1] SPRING  
18. 7N-8784 [ 1] LEVER  
19. 8N-3168 [ 1] LEVER  
20. 8N-3167 [ 2] PLATE  
 

#HEBP14660079
 

2W-1861: TORQUE CONTROL GP

2W1861 TORQUE CONTROL GROUP
Part of Governor & Fuel Injection Pump Group shown on Page 65
c315205 HEBP1466
2W1861 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-0707 [2] BOLT  
2. 8N-3090 [1] CONTACT-LOADSTOP  
3. 2W-7234 C [1] BAR-LOAD STOP  
4. 8N-7735 [1] BAR-STOP  
5. 1P-6452 [1] INSULATOR  
6. 2P-2685 [1] SPACER  
7. 8M-9062 [1] RETAINER-SPRING  
8. 8N-7523 [3] SPRING-TORQUE  
9. 7N-1796 [1] SPACER  
10. 8M-9064 C [1] SHIM-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/05/12
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
New Torque Specification For Fuel Injection Pump Bushing
1982/09/29
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/12/08
New Gasket And Cover Used On Governors
1983/05/18
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Over Fueling Spring No Longer Used In Governor
1985/02/01
Fuel Transfer Pump Improved
1985/10/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/08/01
Seals In Variable Timing Advance Available For Parts Service
1988/07/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance{1251}
1994/09/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection<BR> Injection Timing Before Top Center (BTC)
3306B DIESEL TRUCK ENGINE
Fuel Injection Pump
3306B DIESEL TRUCK ENGINE
Governor
3306B DIESEL TRUCK ENGINE
Governor Control (Low Speed Regulation)
3306B DIESEL TRUCK ENGINE
Governor Control Linkage
3306B DIESEL TRUCK ENGINE
Automatic Timing Advance
3306B DIESEL TRUCK ENGINE
Service Letter-China
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Nozzles
3306B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3306B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3306B DIESEL TRUCK ENGINE
Fuel Ratio Control
3306B DIESEL TRUCK ENGINE
Oil Filter And Oil Filter Base
3306B DIESEL TRUCK ENGINE
Cylinder Liners
3306B DIESEL TRUCK ENGINE
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Gasket And Cover Used On Governors{1264}
1983/04/25
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel System Manual Bleed Valve Removed; Drain Lines Group Added{1251,1253,1286}
1984/02/13
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3306 :

GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
2W-5768 GOV & FUEL INJ PUMP GP
CONTROL AR-TORQUE LIMITING
4W-5500 CONTROL AR-TORQUE LIMITING
CONTROL GP-TORQUE
9N-6232 CONTROL GP-TORQUE
TURBOCHARGER OIL LINES GROUP
4W-8651 TURBOCHARGER OIL LINES GROUP
CARTRIDGE GP-TURBOCHARGER
1W-6865 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
2W-3476 TURBOCHARGER GP
TURBOCHARGER GP
1W-3043 TURBOCHARGER GP
GOV & FUEL INJ PUMP GP
8N-2525 GOV & FUEL INJ PUMP GP
CAMSHAFT AS
8N-2513 CAMSHAFT AS
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
HOUSING AS-FUEL PUMP
1W-3487 HOUSING AS-FUEL PUMP
GOVERNOR GP
2W-2410 GOVERNOR GP
GOVERNOR GP
2W-2410 GOVERNOR GP
GOVERNOR GP
2W-4107 GOVERNOR GP
GOVERNOR GP
2W-4107 GOVERNOR GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.