9T6095 CYLINDER GP-(CHGS 00-06) TILT BLADE. 152-MM (6-IN) BORE X 105-MM (4-IN) STROKE S/N 7PC1-99999 PART OF 9W9057 CYLINDER AR-TILT AN ATTACHMENT D6H



HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D6H TRACK-TYPE TRACTOR 2TG
 D6H & D6H LGP TRACTORS / POWER SHIFT / 2TG00001-03999 (MACHINE) POWERED BY 3306 ENGINE HEBP1559 D6H 2TG   (1987)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3992 CYLINDER GP-TILT
 

#HEBP15590580
 

9T-6095: CYLINDER GP-TILT

9T6095 CYLINDER GP-(CHGS 00-06)
TILT BLADE. 152-MM (6-IN) BORE X 105-MM (4-IN) STROKE
S/N 7PC1-99999
PART OF 9W9057 CYLINDER AR-TILT
AN ATTACHMENT
c408852 HEBP1559
9T6095 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-6094 R [1] CYLINDER AS  
2. 2J-8489 [1] BEARING  
3. 5J-5731 [1] NUT-SELF LOCKING  
4. 9T-6087 [1] WASHER  
5. 1J-0708 [1] RING-WEAR  
6. 4T-1093 [1] HEAD  
7. 2K-3258 [1] RING-BACK-UP  
8. 5H-3252 [1] SEAL-O-RING  
9. 9T-6093 R [1] ROD-PISTON  
10. 6V-8199 [4] BOLT  
  1B-4331 [4] NUT  
11. 8J-0308 [1] CAP-BEARING  
12. 3J-6572 B [12] SHIM .5MM(.02IN)THK  
13. 1K-6982 [1] SEAL-LIP TYPE  
14. 5J-0964 [1] SEAL-U-CUP  
15. 5J-3620 [1] SEAL-RING  
16. 1D-4627 [4] BOLT  
  5P-8249 [4] WASHER  
17. 9T-6092 [1] PISTON AS  
  9W-5113 [1] SPRING  
18. 5J-4989 [1] SEAL AS  
  B   USE AS REQUIRED
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP15590581
 

9T-6095: CYLINDER GP-TILT

9T6095 CYLINDER GP-(CHGS 02-05)
T1LT-BLADE. 152-MM (6-IN) BORE X 105-MM (4-IN) STROKE
S/N 4LG1-UP
PART OF 9W9057 CYLINDER AR-TILT
AN ATTACHMENT
c562714 HEBP1559
9T6095 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-6094 R [1] CYLINDER AS  
2. 2J-8489 [1] BEARING  
3. 5J-5731 [1] NUT-SELF LOCKING  
4. 9T-6087 [1] WASHER  
5. 1J-0708 [1] RING-WEAR  
6. 9T-8218 [1] HEAD  
7. 2K-3258 [1] RING-BACK-UP  
8. 5H-3252 [1] SEAL-O-RING  
9. 9T-6093 R [1] ROD-PISTON  
10. 5P-8167 [4] BOLT  
11. 9T-6092 [1] PISTON AS  
12. 5J-4989 [1] SEAL AS  
13. 1K-6982 [1] SEAL-LIP TYPE  
14. 5J-0964 [1] SEAL-U-CUP  
15. 5J-3620 [1] SEAL-RING  
16. 1D-4627 [4] BOLT  
  5P-8249 [4] WASHER  
17. 2K-1845 [2] COVER  
  2D-0092 [2] GASKET  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP15590582
 

9T-6095: CYLINDER GP-TILT

9T6095 CYLINDER GP-(CHG 06)
TILT-BLADE. 152-MM (6-IN) BORE X 105-MM (4-IN) STROKE
S/N 4LG1-UP
PART OF 9W9057 CYLINDER AR-TILT
AN ATTACHMENT
c609079 HEBP1559
9T6095 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-6094 R [1] CYLINDER AS  
2. 2J-8489 [1] BEARING  
3. 5J-5731 [1] LOCKNUT  
4. 9T-6087 [1] WASHER  
5. 1J-0708 [1] RING-WEAR  
6. 6E-1205 [1] HEAD  
7. 2K-3258 [1] RING-BACKUP (RUBBER)  
8. 5H-3252 [1] SEAL-O-RING (145.64MM ID)  
9. 9T-6093 R [1] ROD-PISTON  
10. 1D-4627 [4] BOLT (7/8-9X3IN)  
  5P-8249 [4] WASHER  
11. 9T-6092 [1] PISTON AS  
12. 5J-4989 [1] SEAL AS  
13. 8C-3840 [1] SEAL-LIP  
14. 5J-0964 [1] SEAL-U-CUP  
15. 8C-3839 [1] SEAL AS  
16. 8T-5668 [1] RING-WEAR  
17. 2H-3755 [4] BOLT (5/16-18X.625IN)  
18. 7S-6369 [4] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP15590583
 

1U-3992: CYLINDER GP-TILT

1U3992 CYLINDER GROUP-TILT-(CHGS 02-04)
6A BULLDOZER. 152.4MM (6 IN) BORE X 191.7MM (7.55 IN) STROKE
S/N 7PC1-99999
PART OF 4T1560 CYLINDER AR-TILT
AN ATTACHMENT
c339618 HEBP1559
1U3992 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. [1] CYLINDER AS  
2. 2J-8489 [1] BEARING  
3. 5J-5731 [1] NUT-SELF LOCKING  
4. 4J-4500 [1] WASHER  
5. 1J-0708 [1] RING-WEAR  
6. 5J-4989 [1] SEAL AS  
7. 2K-3258 [2] RING-BACK-UP  
8. 5H-3252 [1] SEAL-O-RING  
9. 7J-2206 [1] ROD-PISTON  
10. 1D-4615 [4] BOLT  
  1B-4331 [4] NUT  
11. 8J-0308 [1] CAP-BEARING  
12. 3J-6572 [12] SHIM .5MM(.02IN)THK  
13. 1K-6982 [1] SEAL-LIP TYPE  
14. 5J-0964 [1] SEAL-U-CUP  
15. 5J-3620 [1] SEAL-RING  
16. 1D-4627 [4] BOLT  
  5P-8249 [4] WASHER  
17. 4T-1093 [1] HEAD  
18. 4J-2062 [1] PISTON  
 

#HEBP15590584
 

1U-3989: CYLINDER GP-BULLDOZER LIFT

1U3989 CYLINDER GP-DOZER LIFT-(CHGS 01-04)
95.25MM (3.75 IN) BORE X 1262MM (49.61 IN) STROKE
BULLDOZER S/N 2HH1-99999, 4LH1-99999, 4PH1-99999, 5CH1-UP, 4NH1-UP,
3TH1-UP. ALSO PART OF 1U2392, 4T4367, 4T4415, 6Y0079, 6Y0080 BULLDOZER ARS
& 8E1236, 8E1237 VALVE & CYLINDER. AN ATTACHMENT
c523329 HEBP1559
1U3989 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-4762 C [1] HEAD  
2. 1F-6762 [1] BOLT  
3. 1U-4738 [1] WASHER  
4. 5J-8019 J [1] RING-WEAR  
5. 8C-3839 C [1] SEAL AS  
6. 9T-3884 [1] PISTON AS  
7. 2H-4145 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACK UPPER)  
9. 5J-8011 [1] SEAL AS  
10. 1U-4081 R [1] ROD AS  
11. 3J-6572 [12] SHIM .5MM(.02IN)THK  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT  
14. 1B-4331 [4] NUT (FULL)  
15. 1U-4079 [1] CROWN  
16. 8C-3840 C [1] SEAL-LIP TYPE  
17. 5J-0964 J [1] SEAL-U-CUP  
18. 1U-4086 R [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
20. 8T-5668 [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3015 [1] KIT-SEAL (INCL PARTS MARKED J)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP15590585
 

1U-3990: CYLINDER GP-BULLDOZER LIFT

1U3990 CYLINDER GP-DOZER LIFT-(CHGS 01-02)
95.25 MM (3.75 IN) BORE X 1262 MM (49.61 IN) STROKE
BULLDOZER S/N 3FH1-99999
ALSO PART OF 1U2524 BULLDOZER AR
AN ATTACHMENT
c342727 HEBP1559
1U3990 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-4082 [1] HEAD  
2. 1F-6762 [1] BOLT  
3. 1U-4738 [1] WASHER  
4. 5J-8019 [1] RING-WEAR  
5. 5J-3620 [1] SEAL-RING  
6. 9T-3884 [1] PISTON AS  
7. 2H-4145 [1] SEAL-O-RING  
8. 1S-0669 [1] RING  
9. 5J-8011 [1] SEAL AS  
10. 1U-4081 R [1] ROD AS  
11. 3J-6572 [12] SHIM .5MM(.02IN)THK  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT  
14. 1B-4331 [4] NUT  
15. 1U-4079 [1] CROWN  
16. 1K-6982 [1] SEAL-LIP TYPE  
17. 5J-0964 [1] SEAL-U-CUP  
18. 1U-4087 [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3015 [1] KIT-SEAL (HYD CYL)  
    (INCLUDES SEALS & RINGS)
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP15590586
 

1U-3990: CYLINDER GP-BULLDOZER LIFT

1U3990 CYLINDER GP-DOZER LIFT-(CHGS 03-04)
95.25 MM (3.75 IN) BORE X 1262 MM (49.61 IN) STROKE
BULLDOZER S/N 5JH1-UP
ALSO PART OF 1U2524, 6Y0081 BULLDOZER ARS & 8E1238, 8E1240
VALVE & CYLINDER. AN ATTACHMENT
c523331 HEBP1559
1U3990 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 9T-4762 C [1] HEAD  
2. 1F-6762 [1] BOLT  
3. 1U-4738 [1] WASHER  
4. 5J-8019 J [1] RING-WEAR  
5. 8C-3839 C [1] SEAL AS  
6. 9T-3884 [1] PISTON AS  
7. 2H-4145 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACK UPPER)  
9. 5J-8011 [1] SEAL AS  
10. 1U-4081 R [1] ROD AS  
11. 3J-6572 [12] SHIM .5MM(.02IN)THK  
12. 4J-0121 [1] CAP-BEARING  
13. 0S-1756 [4] BOLT  
14. 1B-4331 [4] NUT  
15. 1U-4079 [1] CROWN  
16. 8C-3840 C [1] SEAL-LIP TYPE  
17. 5J-0964 J [1] SEAL-U-CUP  
18. 1U-4087 [1] CYLINDER AS  
19. 4J-6374 [2] BEARING-SLEEVE  
20. 8T-5668 [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3015 [1] KIT-SEAL (HYD CYL)  
    (INCLS PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#HEBP15590587
 

9T-2716: CYLINDER GP-RIPPER LIFT

9T2716 CYLINDER GP-RIPPER LIFT-(CHG 00)
127 MM (5 IN) BORE X 362 MM (14.25 IN) STROKE
RIPPER S/N 4CH1-99999, 3SH1-UP
ALSO PART OF 9W0804 RIPPER AR. AN ATTACHMENT
c523348 HEBP1559
9T2716 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
4. 9T-2715 [1] CYLINDER AS  
5. 4K-3128 [2] BEARING-SLEEVE  
6. 6J-9739 [1] HEAD  
7. 5J-3620 [1] SEAL-RING  
8. 5J-0964 [1] SEAL-U-CUP  
9. 1K-6982 [1] SEAL-LIP TYPE  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BEARING-SLEEVE  
12. 1D-4628 [4] BOLT  
  5P-8249 [4] WASHER  
13. 2K-4096 [1] RING  
14. 5F-3144 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER  
16. 2J-0564 [1] NUT-SELF LOCKING  
 

#HEBP15590588
 

9T-2716: CYLINDER GP-RIPPER LIFT

9T2716 CYLINDER GP-RIPPER LIFT (CHG 01-02)
127 MM (5 IN) BORE X 362 MM (14.25 IN) STROKE
RIPPER S/N 3SH1-UP
PART OF 9W0804 RIPPER AR. AN ATTACHMENT
c594171 HEBP1559
9T2716 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 3G-1753 [1] PISTON  
2. 4J-3420 [1] RING-WEAR  
3. 5J-5020 [1] SEAL AS  
4. 9T-2715 [1] CYLINDER AS  
5. 4K-3128 [2] BEARING-SLEEVE  
6. 9T-6863 C [1] HEAD  
7. 8C-3839 [1] SEAL AS  
8. 5J-0964 [1] SEAL-U-CUP  
9. 8C-3840 [1] SEAL-LIP  
10. 9T-2714 [1] ROD AS  
11. 2K-4507 [1] BEARING-SLEEVE  
12. 1D-4628 [4] BOLT  
  5P-8249 [4] WASHER  
13. 2K-4096 [1] RING  
14. 5F-3144 [1] SEAL-O-RING  
15. 3G-1757 [1] WASHER  
16. 2J-0564 [1] LOCKNUT  
17. 8T-5668 C [1] RING-WEAR  
18. 1P-4576 [4] FLANGE  
19. 4J-5267 [2] SEAL  
  5H-4018 [2] COVER  
20. 8T-4896 [8] WASHER-HARD  
  9B-7237 [8] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#HEBP15590589
 

9G-5392: LINES GP-LIFT CYLINDER

9G5392 LINES GP-LIFT CYLINDER
S/N 7PC1-99999, 8YC1-99999
PART OF 3W3925, 3W3930, 3W3935, 3W3940 HYDRAULIC ARS
AN ATTACHMENT
c412429 HEBP1559
9G5392 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6H TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8T-2602 [2] CLIP (TAB)  
2. 8T-2603 [2] CLIP (SLOT)  
3. 8S-0023 [2] CLIP (SLOT)  
4. 8S-0024 [2] CLIP (TAB)  
5. 0S-1591 [2] BOLT  
6. 9L-9132 [8] WASHER  
7. 9S-8752 [2] NUT-FULL  
8. 3B-1915 [8] BOLT  
9. 5M-2894 [16] WASHER  
10. 3W-1153 [1] TUBE AS  
11. 1P-4577 [4] FLANGE-HALF  
12. 4J-0520 [2] SEAL  
13. 0S-1588 [4] BOLT  
14. 5P-1075 [4] WASHER-HARD  
15. 7G-5984 [3] CLIP (TAB)  
16. 7G-5985 [3] CLIP (SLOT)  
17. 7G-5986 [3] GROMMET  
18. 3W-1152 [1] TUBE AS  
19. 1D-4707 [8] BOLT  
20. 5P-8244 [8] WASHER  
21. 7K-1423 [4] FLANGE  
22. 4J-0522 [2] SEAL  
23. 0S-1595 [2] BOLT  
24. 5P-8245 [2] WASHER  
25. 0L-1351 [4] BOLT  
26. 3T-8038 [2] HOSE AS  
27. 0T-0573 [4] BOLT  
28. 1P-3704 [2] SEAL-RECTANGULAR  
29. 0S-1571 [4] BOLT  
30. 5G-8499 [1] TUBE  
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6H :

CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3991 CYLINDER GP-TILT
VALVE & CYLINDER GP
8E-1237 VALVE & CYLINDER GP
VALVE & CYLINDER GP
8E-1236 VALVE & CYLINDER GP
VALVE & CYLINDER GP
8E-1240 VALVE & CYLINDER GP
VALVE & CYLINDER GP
8E-1238 VALVE & CYLINDER GP
MOUNTING GP-CYLINDER
3G-9451 MOUNTING GP-CYLINDER
COVER GP-PROTECTION
9G-9288 COVER GP-PROTECTION
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
9T-6095 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-3992 CYLINDER GP-TILT
CYLINDER GP-BULLDOZER LIFT
1U-3989 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
1U-3990 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
1U-3990 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT
CYLINDER GP-RIPPER LIFT
9T-2716 CYLINDER GP-RIPPER LIFT

Truck sale:

 
 
Caterpillar D6H
- Crawler dozers
EMPIRE MACHINERY
Caterpillar D6H, Crawler dozers, Construction
75,000 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
TRACTOR & EQUIPMENT CO.
Caterpillar D6H, Crawler dozers, Construction
38,000 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
MACALLISTER MACHINERY CO., INC
Caterpillar D6H, Crawler dozers, Construction
65,625 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
HOLT CAT
Caterpillar D6H, Crawler dozers, Construction
71,015 
Caterpillar D6H, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA